Description
Pi-JET 250-3 (400V) – industrial hydropressure pump
The IPRO Pi-JET 400V series comprises multistage, self-priming centrifugal pumps made entirely of AISI 304 stainless steel, powered by three-phase electricity (400 V, motor in a 3×230 V configuration). As IPRO products designed for professionals and applications requiring increased reliability, they are intended for water systems and for pumping clean fluids with a viscosity similar to that of water and non-corrosive to stainless steel—including heating and cooling systems.
Who it is for
- Industrial plants with three-phase electrical systems—400V power supply ensures efficient operation even for the most demanding tasks.
- Water-system installers—the series offers a wide range of head and capacity, making it possible to select a model for a demanding installation without changing the power-supply type.
- Farms and horticultural businesses with access to three-phase power—the model supports extensive irrigation systems with high capacity requirements.
- Contractors installing heating and cooling systems—the all-stainless-steel construction is suitable for pumping clean process fluids.
Applications
Pi-JET 400V hydropressure pumps are used in raw-water intake and transfer systems with high capacity requirements, supplied from private water sources—dug or deep wells. The multistage design enables water to be suctioned from depths of up to 8 metres, depending on the model, while maintaining high operating pressure. The pumps do not treat water; when using the water for other purposes, we recommend ensuring appropriate preparation.
For this series, three-phase power is not merely an alternative to a single-phase installation but, for some models, the only available option: at the highest power ratings (250-3, 420-4, 220-5, 270-5), the manufacturer offers only the 400V version because a single-phase motor drawing this much current would be impractical to operate. The Pi-JET 400V hydropressure pump works with hydropressure controllers and diaphragm tanks, allowing the set configuration to be adapted to a demanding installation.
Features
The Pi-JET series is constructed entirely from AISI 304 stainless steel—the casing, impellers, diffusers, and intermediate wall are all made of this material, providing high corrosion resistance when operating with technically clean water and fluids of similar viscosity. The motor thrust plate is made of aluminium, reducing the weight of the entire assembly without compromising structural rigidity.
The graphite/ceramic mechanical seal ensures shaft tightness typical of this class of surface pumps and proven in water, heating, and cooling installations. The three-phase motor in a 3×230V/400V configuration ensures stable operation under the load typical of industrial installations and longer continuous-duty cycles.
- Power supply: 3~400 V (3×230 V)
- Pump casing: AISI 304 stainless steel
- Impellers and diffusers: AISI 304 stainless steel
- Intermediate wall: AISI 304 stainless steel
- Thrust plate: aluminium
- Mechanical seal: graphite / ceramic
- Insulation class: F
- Suction capacity: up to 8 m (depending on the model)
- Fluid temperature: from -20°C to 70°C
- Maximum ambient temperature: 50°C
- Maximum system pressure: 1 MPa
IPRO – 36-month (3-year) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions
What fluids and installations are Pi-JET pumps designed for?
Pi-JET pumps are intended for water systems and for pumping clean fluids with a viscosity similar to that of water and non-corrosive to AISI 304 stainless steel—including heating and cooling systems.
What are the benefits of 400V three-phase power in Pi-JET pumps?
The three-phase motor provides smoother starting and more stable operation under load than a single-phase equivalent of similar power. As a result, the highest-capacity models in the series—250-3, 420-4, 220-5, and 270-5—are offered specifically in this power-supply version, suited to continuous operation in industrial installations.
Can the Pi-JET 400V work with a hydropressure controller or diaphragm tank?
Yes, the pump is designed to work with both diaphragm tanks and hydropressure controllers, making it possible to build a complete set for increasing and stabilising pressure in the installation.
What is the difference between the three-phase (400V) and single-phase (230V) versions in the Pi-JET series?
The 400V three-phase version requires a suitable electrical installation at the site but provides access to the highest-capacity models in this series, which are unavailable in the single-phase version. Where only a 230V installation is available, the choice is limited to models offered in both power-supply variants.
What warranty applies to IPRO Pi-JET 400V pumps?
IPRO Pi-JET 400V pumps are covered by a 36-month (3-year) manufacturer’s warranty, while warranty and post-warranty service is provided by Dambat. For maintenance or repairs, please contact the service department directly.
- Power: 3.0 kW,
- Power supply: 300–400 V,
- Frequency: 50 Hz,
- Current draw: 5.9 A,
- Motor speed: rpm,
- Dimensions: 526/224/182 mm
- Weight: 31.0 kg,
Download: instrukcja_Pi-JET_PL.pdf
Download: GARAN_Prawny_obowiazek_zapewnienia_zgodnosci_towaru_z_umowa.pdf
Pi-JET 250-3 (400V) – industrial hydropressure pump
The IPRO Pi-JET 400V series comprises multistage, self-priming centrifugal pumps made entirely of AISI 304 stainless steel, powered by three-phase electricity (400 V, motor in a 3×230 V configuration). As IPRO products designed for professionals and applications requiring increased reliability, they are intended for water systems and for pumping clean fluids with a viscosity similar to that of water and non-corrosive to stainless steel—including heating and cooling systems.
Who it is for
- Industrial plants with three-phase electrical systems—400V power supply ensures efficient operation even for the most demanding tasks.
- Water-system installers—the series offers a wide range of head and capacity, making it possible to select a model for a demanding installation without changing the power-supply type.
- Farms and horticultural businesses with access to three-phase power—the model supports extensive irrigation systems with high capacity requirements.
- Contractors installing heating and cooling systems—the all-stainless-steel construction is suitable for pumping clean process fluids.
Applications
Pi-JET 400V hydropressure pumps are used in raw-water intake and transfer systems with high capacity requirements, supplied from private water sources—dug or deep wells. The multistage design enables water to be suctioned from depths of up to 8 metres, depending on the model, while maintaining high operating pressure. The pumps do not treat water; when using the water for other purposes, we recommend ensuring appropriate preparation.
For this series, three-phase power is not merely an alternative to a single-phase installation but, for some models, the only available option: at the highest power ratings (250-3, 420-4, 220-5, 270-5), the manufacturer offers only the 400V version because a single-phase motor drawing this much current would be impractical to operate. The Pi-JET 400V hydropressure pump works with hydropressure controllers and diaphragm tanks, allowing the set configuration to be adapted to a demanding installation.
Features
The Pi-JET series is constructed entirely from AISI 304 stainless steel—the casing, impellers, diffusers, and intermediate wall are all made of this material, providing high corrosion resistance when operating with technically clean water and fluids of similar viscosity. The motor thrust plate is made of aluminium, reducing the weight of the entire assembly without compromising structural rigidity.
The graphite/ceramic mechanical seal ensures shaft tightness typical of this class of surface pumps and proven in water, heating, and cooling installations. The three-phase motor in a 3×230V/400V configuration ensures stable operation under the load typical of industrial installations and longer continuous-duty cycles.
- Power supply: 3~400 V (3×230 V)
- Pump casing: AISI 304 stainless steel
- Impellers and diffusers: AISI 304 stainless steel
- Intermediate wall: AISI 304 stainless steel
- Thrust plate: aluminium
- Mechanical seal: graphite / ceramic
- Insulation class: F
- Suction capacity: up to 8 m (depending on the model)
- Fluid temperature: from -20°C to 70°C
- Maximum ambient temperature: 50°C
- Maximum system pressure: 1 MPa
IPRO – 36-month (3-year) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions
What fluids and installations are Pi-JET pumps designed for?
Pi-JET pumps are intended for water systems and for pumping clean fluids with a viscosity similar to that of water and non-corrosive to AISI 304 stainless steel—including heating and cooling systems.
What are the benefits of 400V three-phase power in Pi-JET pumps?
The three-phase motor provides smoother starting and more stable operation under load than a single-phase equivalent of similar power. As a result, the highest-capacity models in the series—250-3, 420-4, 220-5, and 270-5—are offered specifically in this power-supply version, suited to continuous operation in industrial installations.
Can the Pi-JET 400V work with a hydropressure controller or diaphragm tank?
Yes, the pump is designed to work with both diaphragm tanks and hydropressure controllers, making it possible to build a complete set for increasing and stabilising pressure in the installation.
What is the difference between the three-phase (400V) and single-phase (230V) versions in the Pi-JET series?
The 400V three-phase version requires a suitable electrical installation at the site but provides access to the highest-capacity models in this series, which are unavailable in the single-phase version. Where only a 230V installation is available, the choice is limited to models offered in both power-supply variants.
What warranty applies to IPRO Pi-JET 400V pumps?
IPRO Pi-JET 400V pumps are covered by a 36-month (3-year) manufacturer’s warranty, while warranty and post-warranty service is provided by Dambat. For maintenance or repairs, please contact the service department directly.