Calculators and converters for selecting pumps

Online tools that help estimate water demand, check pressure losses and the risk of cavitation, select an inverter, power cable cross-section and expansion vessel capacity, and convert flow and pressure units.

Schemat instalacji: ujęcie wody, pompa głębinowa, zbiornik hydroforowy, uzdatnianie wody i instalacja wewnętrzna Ujęcie wody Pompa Rurociąg Przewód zasilający Ciśnienie Falownik Punkty poboru
  • Strefa wody surowej, przed uzdatnianiem
  • Uzdatnianie wody
  • Instalacja wewnętrzna, po uzdatnieniu i kontroli jakości

Select an installation component in the diagram to see the related calculators.

Pump and kit selection

Start with the water demand and the required pressure. These values determine the pump’s flow rate and head.

Water Requirement Calculator

Estimates instantaneous (simultaneous) water demand and approximate daily consumption in the home and on the farm. Average values are based on tables from the IBO catalog.

Podajesz
collection points and their number, livestock, elevation above sea level
Wynik
instantaneous flow (L/min) and daily consumption

Device parameter selection guide

Step-by-step guide to pressure systems: how to determine the required flow rate and pressure, and when to choose a pump with a pressure tank.

Podajesz
water demand, required pressure
Wynik
pressure system selection guidelines

NPSH and cavitation risk calculator

Checks whether the suction system provides the pump with a sufficient NPSH margin. Simple and advanced modes, taking into account the type of liquid, temperature, and pipe material.

Podajesz
suction or inlet head, flow rate, suction pipe, liquid temperature, required NPSH
Wynik
Available NPSH, margin, and cavitation risk assessment

Pipeline and pressure losses

The pipe’s diameter and material determine how much pressure the pump loses on the way to the outlets.

Pipe diameter converter

Compares corresponding pipe dimensions across different standards: DN, DIN, ISO, metric, inch, and ASTM.

Podajesz
standard and pipe size
Wynik
equivalents in the other standards

Pressure drops and flow rates

Shows the pressure loss in a rigid, horizontal pipeline depending on the material, nominal diameter, and water flow rate.

Podajesz
pipe material, flow rate (m³/h), nominal diameter
Wynik
pressure loss in the pipeline

Unit conversion

Datasheets, pressure gauges, and international documentation list specifications in different units. Convert them all here in one step.

Volumetric Flow Calculator

Converts pump capacity between metric and imperial units.

Podajesz
value and unit: m³/h, l/h, l/min, l/s, ft³/min, ft³/s, gal/min (US), gal/s (US)
Wynik
value in the selected unit

Pressure unit converter

Converts pressure and head, for example when a pump datasheet gives meters of water column while the pressure gauge shows bar or PSI.

Podajesz
value and unit: bar, MPa, kPa, PSI, mH₂O, atm
Wynik
value in all other units

Pump power supply and control

Selecting the inverter and power supply cable. Cable calculators use a voltage drop of 1.5% for 230 V and 2% for 400 V, because a cable that is too thin or too long lowers the voltage at the motor.

Inverter selection calculator

Based on the data on the pump’s nameplate, it displays Dambat inverters that are compatible with it. It takes into account the pump type, power supply method, IP rating, and control method.

Podajesz
P2 power and rated current of the pump, mains and motor power supply, pump type, IP rating, control method, Modbus
Wynik
inverters from the range matched to the pump

Cable cross-section calculator

Selects the conductor cross-section of the power cable supplying the pump based on the specified cable length and motor power.

Podajesz
cable length, pump power, 230 / 400 V voltage, 1- or 3-phase installation
Wynik
wire cross-section (mm²)

Maximum cable length calculator

Calculates how long a cable with a given cross-section can be so that the voltage drop does not exceed the permissible value.

Podajesz
cable cross-section, pump power, 230 / 400 V voltage, single- or three-phase installation
Wynik
maximum cable length (m)

Heating and operating costs

Tools for heating systems and for those considering replacing an old pump with an energy-efficient one.

Selecting the capacity of a diaphragm expansion vessel

Determines the expansion vessel capacity for a closed water heating system, including systems with ethylene glycol, for a vessel on the pump’s suction or discharge side.

Podajesz
factor, temperature, system capacity, height, pressures, circulation pump parameters
Wynik
required vessel capacity

Energy savings calculator

Compares the energy consumption of the current and new pump to assess whether replacing it is worthwhile.

Podajesz
the power of the current and new pump, operating hours per day, the price per kWh, purchase cost
Wynik
percentage savings and payback period

Frequently asked questions

Are calculators free?

Yes. All tools work in your browser, with no registration or login required. You can copy or print the result if the calculator offers that option.

Which calculator should I start with when selecting a pump?

First, estimate the water demand, then use the equipment parameter selection chart. Next, check the pressure losses in the pipeline and, for pumps operating under suction lift, also check the NPSH margin. Finally, select the cross-section of the power cable and, if the pump is to operate at variable speed, a frequency converter as well.

What assumptions do cable calculators make?

The cross-section calculator and maximum cable length converter assume an allowable voltage drop of 1.5% for a 230 V single-phase installation and 2% for a 400 V three-phase installation, with the cable operating temperature ranging from -25°C to +60°C.

How accurate are the results?

The calculations are based on the laws of physics and average catalog data. Actual values may vary depending on the materials and installation conditions, so it is worth verifying the result before purchase and installation.

What should you do if the result raises concerns?

Contact us: +48 22 721 11 92 or biuro@dambat.pl. We’ll help interpret the result and choose the right device.

Need help choosing?

Send us the results from the calculators and the installation specifications. We’ll advise you on which IBO, IPRO, IBO ITALY, or DRENO device is right for you.