Series pumps Pi-JET IPRO have been designed for a wide range of applications in water, heating and cooling installations. Their solid construction, made of corrosion-resistant materials (AISI 304), ensures long service life and high reliability in everyday use.
Application
Pi-JET pumps IPRO are intended for:
- water installations,
- systems containing clean liquids with a viscosity similar to water, non-corrosive to AISI 304 stainless steel,
- heating and cooling systems,
- air conditioning and ventilation systems,
- water treatment installations,
- industrial equipment (e.g. cleaning, dosing, irrigation, pressure raising),
- transport of drinking and lightly chlorinated water.
Working conditions
The pump is designed to pump liquids:
- thin, clean, non-explosive and non-flammable,
- free of solid particles and fibers.
For liquids with a higher density or viscosity than water, a more powerful motor is recommended.
Technical data
- Liquid temperature: -20°C to +70°C
- Maximum ambient temperature: +50°C
- Power supply:
• Single phase: 1~ 230V / 50Hz
• Three-phase: 3~ 400 V (or 3×230 V) / 50 Hz
- Insulation class: F
- Degree of protection: IP55
- Maximum suction depth: 8 m
- Maximum system pressure: 1.0 MPa (PM10)
Engine
The pump is equipped with 2-pole induction motor. The brand offers IPRO we have single-phase and three-phase solutions tailored to the capacity and lift needed in each type of installation. For convenience, a larger number (three-digit) in Pi-JET means the pump's capacity: e.g. Pi-JET 120 - 3. And the additional digit means power and lifting capacity - the higher the number, the greater the lifting and power of the pump. Some models are available to order.
Materials:
AISI 304 stainless steel: pump housing, suction and discharge diffuser, suction and discharge impeller, bushings, spring
Plastics:
- Dust transport cap – PE (polyethylene)
- Intake valve body and (optional) intake diffuser cover – PPA (polyamide with high thermal resistance)
- Pressure plate – Aluminum (AL)
Elastomers and seals:
- Seals – EPDM (ethylene-propylene rubber)
- Mechanical seal – graphite / ceramics
