Description
Pi-JET 120-6 (230V) – industrial hydrofor pump
The Pi-JET 230V series by IPRO consists of multistage, self-priming centrifugal pumps made entirely of AISI 304 stainless steel and powered by a single-phase supply (230 V). As devices from the IPRO line, designed for professionals and applications requiring increased reliability, they are intended for water systems and for pumping clean fluids with a viscosity similar to that of water, non-corrosive to stainless steel – including heating and cooling systems.
Who it is for
- Single-family homes and facilities without a three-phase installation – the 230V power supply allows the pump to be connected to a standard socket without the need to install a separate three-phase line.
- Water-system installers – the wide range of heads available in this series makes it possible to select a model for a specific installation without changing the power-supply type.
- Farms and horticultural businesses – the pump performs well when supplying irrigation systems from private water sources.
- Wholesalers and technical retail outlets – a wide range of models with different heads and capacities, all using the same consistent single-phase power supply.
Applications
Pi-JET 230V hydrofor pumps are used in systems for drawing and pumping raw water supplied from private sources – dug or deep wells – where they provide stable water-intake parameters and high operating pressure. The multistage design allows water to be drawn from depths of up to 8 metres, depending on the model, while maintaining high pumping efficiency. The pumps do not treat water – when using the water for other purposes, we recommend ensuring appropriate preparation.
The single-phase power supply makes this series a natural choice wherever there is no access to a three-phase installation – in single-family homes, allotments and smaller farms. Some models in this series (e.g. 120-6 or 200-5) are also available in a 400V three-phase version – the choice between them depends solely on the available electrical installation, not on the pump capacity. The Pi-JET 230V hydrofor pump works with hydrofor controllers and diaphragm tanks, allowing the set configuration to be adapted to a specific installation.
Features
The Pi-JET series is constructed entirely from AISI 304 stainless steel – the casing, impellers, diffusers and intermediate wall are made of this material, providing high corrosion resistance when working with technically clean water and fluids of similar viscosity. The motor thrust plate is made of aluminium, reducing the weight of the entire assembly without compromising structural rigidity.
The graphite/ceramic mechanical seal ensures shaft tightness typical of this class of surface pumps and proven in water, heating and cooling installations. The single-phase motor is designed for easy connection to a standard 230V network without additional starting equipment.
- Power supply: 1~230 V
- Pump casing: AISI 304 stainless steel
- Impellers and diffusers: AISI 304 stainless steel
- Intermediate wall: AISI 304 stainless steel
- Thrust plate: aluminium
- Mechanical seal: graphite / ceramic
- Insulation class: F
- Suction capacity: up to 8 m (depending on the model)
- Fluid temperature: from -20°C to 70°C
- Maximum ambient temperature: 50°C
- Maximum system pressure: 1 MPa (PN10)
IPRO – 36-month (3-year) manufacturer's warranty. Warranty and post-warranty service provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions
What fluids and systems are Pi-JET pumps designed for?
Pi-JET pumps are designed for water systems and for pumping clean fluids with a viscosity similar to that of water, non-corrosive to AISI 304 stainless steel – including heating and cooling systems.
Can the Pi-JET 230V work with a hydrofor controller or diaphragm tank?
Yes, the pump is designed to work with both a diaphragm tank and hydrofor controllers, allowing you to build a complete set that increases and stabilises pressure in the system.
How do I select the right Pi-JET pump for my system's needs?
Selection depends on the difference in height and system resistance between the water source and the point of use, so it is worth comparing the specific Hmax values of the available models on the technical data sheet. If in doubt, we encourage you to contact our service team.
What is the difference between the single-phase (230V) and three-phase (400V) versions in the Pi-JET series?
The 230V single-phase version does not require a three-phase installation and is sufficient for most models in this series. At the highest power ratings, some Pi-JET variants (e.g. 250-3 or 420-4) are available only in a three-phase version because, at this power consumption, a single-phase motor is no longer a practical solution – therefore, three-phase 400V is sometimes the only option for the highest-capacity models in the range.
What warranty applies to IPRO Pi-JET 230V pumps?
IPRO Pi-JET 230V pumps are covered by a 36-month (3-year) manufacturer's warranty, while warranty and post-warranty service is provided by Dambat. For maintenance or repairs, it is worth contacting the service department directly.
- Power: 1.1 kW,
- Power supply: 1~230 V,
- Frequency: 50 Hz,
- Current draw: 7.0 A,
- Motor speed: rpm,
- Dimensions: 432/180/160 mm
- Weight: 12.5 kg,
Download: instrukcja_Pi-JET_PL.pdf
Download: GARAN_Prawny_obowiazek_zapewnienia_zgodnosci_towaru_z_umowa.pdf
Pi-JET 120-6 (230V) – industrial hydrofor pump
The Pi-JET 230V series by IPRO consists of multistage, self-priming centrifugal pumps made entirely of AISI 304 stainless steel and powered by a single-phase supply (230 V). As devices from the IPRO line, designed for professionals and applications requiring increased reliability, they are intended for water systems and for pumping clean fluids with a viscosity similar to that of water, non-corrosive to stainless steel – including heating and cooling systems.
Who it is for
- Single-family homes and facilities without a three-phase installation – the 230V power supply allows the pump to be connected to a standard socket without the need to install a separate three-phase line.
- Water-system installers – the wide range of heads available in this series makes it possible to select a model for a specific installation without changing the power-supply type.
- Farms and horticultural businesses – the pump performs well when supplying irrigation systems from private water sources.
- Wholesalers and technical retail outlets – a wide range of models with different heads and capacities, all using the same consistent single-phase power supply.
Applications
Pi-JET 230V hydrofor pumps are used in systems for drawing and pumping raw water supplied from private sources – dug or deep wells – where they provide stable water-intake parameters and high operating pressure. The multistage design allows water to be drawn from depths of up to 8 metres, depending on the model, while maintaining high pumping efficiency. The pumps do not treat water – when using the water for other purposes, we recommend ensuring appropriate preparation.
The single-phase power supply makes this series a natural choice wherever there is no access to a three-phase installation – in single-family homes, allotments and smaller farms. Some models in this series (e.g. 120-6 or 200-5) are also available in a 400V three-phase version – the choice between them depends solely on the available electrical installation, not on the pump capacity. The Pi-JET 230V hydrofor pump works with hydrofor controllers and diaphragm tanks, allowing the set configuration to be adapted to a specific installation.
Features
The Pi-JET series is constructed entirely from AISI 304 stainless steel – the casing, impellers, diffusers and intermediate wall are made of this material, providing high corrosion resistance when working with technically clean water and fluids of similar viscosity. The motor thrust plate is made of aluminium, reducing the weight of the entire assembly without compromising structural rigidity.
The graphite/ceramic mechanical seal ensures shaft tightness typical of this class of surface pumps and proven in water, heating and cooling installations. The single-phase motor is designed for easy connection to a standard 230V network without additional starting equipment.
- Power supply: 1~230 V
- Pump casing: AISI 304 stainless steel
- Impellers and diffusers: AISI 304 stainless steel
- Intermediate wall: AISI 304 stainless steel
- Thrust plate: aluminium
- Mechanical seal: graphite / ceramic
- Insulation class: F
- Suction capacity: up to 8 m (depending on the model)
- Fluid temperature: from -20°C to 70°C
- Maximum ambient temperature: 50°C
- Maximum system pressure: 1 MPa (PN10)
IPRO – 36-month (3-year) manufacturer's warranty. Warranty and post-warranty service provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions
What fluids and systems are Pi-JET pumps designed for?
Pi-JET pumps are designed for water systems and for pumping clean fluids with a viscosity similar to that of water, non-corrosive to AISI 304 stainless steel – including heating and cooling systems.
Can the Pi-JET 230V work with a hydrofor controller or diaphragm tank?
Yes, the pump is designed to work with both a diaphragm tank and hydrofor controllers, allowing you to build a complete set that increases and stabilises pressure in the system.
How do I select the right Pi-JET pump for my system's needs?
Selection depends on the difference in height and system resistance between the water source and the point of use, so it is worth comparing the specific Hmax values of the available models on the technical data sheet. If in doubt, we encourage you to contact our service team.
What is the difference between the single-phase (230V) and three-phase (400V) versions in the Pi-JET series?
The 230V single-phase version does not require a three-phase installation and is sufficient for most models in this series. At the highest power ratings, some Pi-JET variants (e.g. 250-3 or 420-4) are available only in a three-phase version because, at this power consumption, a single-phase motor is no longer a practical solution – therefore, three-phase 400V is sometimes the only option for the highest-capacity models in the range.
What warranty applies to IPRO Pi-JET 230V pumps?
IPRO Pi-JET 230V pumps are covered by a 36-month (3-year) manufacturer's warranty, while warranty and post-warranty service is provided by Dambat. For maintenance or repairs, it is worth contacting the service department directly.