Description
MH PRO 80/60 S – industrial hydrofor pump
The MH PRO S series by IPRO consists of multistage, self-priming centrifugal pumps powered by single-phase electricity (230 V), designed for pumping clean technical and cold raw water from private water intakes and for increasing the pressure in systems drawing and delivering this water, including installations with enhanced requirements. As devices from the IPRO line, dedicated to professionals and applications requiring increased reliability, they stand out with a Venturi tube system that provides high suction capacity and a construction based on AISI 304 stainless steel, ensuring corrosion resistance even under intensive use.
Who it is for
- Single-family homes and farms without a three-phase installation – the 230V power supply allows the pump to be connected to a standard socket without the need to install a separate three-phase line.
- Water-system installers – the ability to work with a diaphragm tank or a hydrofor controller makes it easier to select a complete set.
- Farms and horticultural businesses – the pump works well for supplying irrigation systems from private water intakes.
- Wholesalers and technical retailers – a proven model with universal applications, complementing the range with industrial solutions available without a three-phase installation.
Applications
MH PRO S hydrofor pumps are used in systems drawing and delivering raw water from private water intakes – dug or deep wells – where they provide stable water intake parameters and high operating pressure. The multistage construction combined with the Venturi tube enables water to be drawn from depths of up to 9 metres while maintaining high pumping efficiency. The pumps are not water-treatment devices; when using the water for other purposes, we recommend ensuring appropriate preparation.
The single-phase power supply makes this series a natural choice wherever a three-phase installation is unavailable – in single-family homes, recreational plots and smaller farms, for drawing and delivering raw water, watering or using rainwater. The MH PRO S 230V hydrofor pump works with a diaphragm tank and hydrofor controllers, allowing the configuration to be adapted to a specific installation.
Features
The MH PRO S series is based on a pump body and shaft made of AISI 304 stainless steel, providing high corrosion resistance when working with clean technical water. The PPO polymer impeller and diffuser reduce the weight of the rotating components, while the cast-iron ports and base increase mounting rigidity at higher operating pressure. The asynchronous motor in a closed aluminium housing with external ventilation ensures stable operation even under heavy load.
The SiC/SiC/EPDM mechanical seal – with both sliding rings made of silicon carbide – maintains shaft tightness considerably longer than typical ceramic/graphite combinations, especially during extended, continuous operation. The motor has built-in thermal protection in the winding, protecting the pump against overheating.
- Power supply: 1~230 V
- Pump body: AISI 304 stainless steel
- Shaft and rotor: AISI 304 stainless steel
- Impeller and diffuser: PPO polymer
- Ports and base: cast iron
- Mechanical seal: SiC / SiC / EPDM
- Motor: asynchronous, aluminium housing, external ventilation
- Suction capacity: up to 9 m (Venturi tube)
- Thermal protection built into the motor winding
- Insulation class: F
- Protection rating: IP55
- Maximum liquid temperature: 70°C
- Connection: 1" or 1¼×1¼" (depending on the model)
IPRO – 36 months (3 years) of the manufacturer's warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and water-engineering equipment with quality certificates.
Frequently asked questions
How does the Venturi tube system work in MH PRO S pumps?
The Venturi tube increases the pump's suction capacity, enabling water to be drawn from depths of up to 9 metres without having to fill the suction system before start-up. This solution is particularly useful when the water level in a well varies.
Can the MH PRO S work with a hydrofor controller or diaphragm tank?
Yes, the pump is designed to work with both a diaphragm tank and hydrofor controllers, allowing you to build a complete set that increases and stabilises pressure in the installation.
What is the SiC/SiC material used in the mechanical seal of these pumps?
SiC is silicon carbide (carborundum) – a hard, sintered ceramic material with high resistance to abrasion, corrosion and temperature. In the SiC/SiC designation, both mating seal surfaces are made of this material, making them considerably harder and more mechanically resistant than typical combinations made of oxide ceramics or graphite. As a result, the seal better withstands the presence of fine contaminants in the pumped water and maintains tightness for a longer service life.
Which installations are best suited to the MH PRO S?
The MH PRO S is suitable wherever only a single-phase 230V power supply is available – in single-family homes, recreational plots and farms without a three-phase installation.
How does the MH PRO S series differ from the MH PRO T?
The MH PRO S operates on a single-phase 230V power supply and does not require a three-phase installation, making it easier to connect in homes and smaller farms. The MH PRO T is powered by three-phase electricity (230V or 400V) and is suitable for industrial plants, car washes, or air-conditioning and refrigeration systems where such an installation is already available.
What warranty applies to IPRO MH PRO S pumps?
IPRO MH PRO S pumps are covered by a 36-month (3-year) manufacturer's warranty, while warranty and post-warranty service is provided by Dambat. For maintenance or repairs, it is worth contacting the service department directly.
- Lift: 60.0 m,
- Capacity: 80.0 l/min.,
- Suction capacity: 9.0 m,
- Power: 1.0 kW,
- Power supply: 1~230 V,
- Frequency: 50 Hz,
- Current consumption: 6.2 A,
- Motor speed: 2850 rpm. ,
- Insulation class: F,
- Operating mode: continuous,
- Protection rating: IP55,
- Connection: 1x1",
- Outlet direction: Vertical,
- Operating position: Horizontal,
- Maximum liquid temperature: 70°C,
- Maximum ambient temperature: 50°C,
- Dimensions L/H/W: 45/21/18 cm,
- Weight: 10.8 kg,
MH PRO 80/60 S – industrial hydrofor pump
The MH PRO S series by IPRO consists of multistage, self-priming centrifugal pumps powered by single-phase electricity (230 V), designed for pumping clean technical and cold raw water from private water intakes and for increasing the pressure in systems drawing and delivering this water, including installations with enhanced requirements. As devices from the IPRO line, dedicated to professionals and applications requiring increased reliability, they stand out with a Venturi tube system that provides high suction capacity and a construction based on AISI 304 stainless steel, ensuring corrosion resistance even under intensive use.
Who it is for
- Single-family homes and farms without a three-phase installation – the 230V power supply allows the pump to be connected to a standard socket without the need to install a separate three-phase line.
- Water-system installers – the ability to work with a diaphragm tank or a hydrofor controller makes it easier to select a complete set.
- Farms and horticultural businesses – the pump works well for supplying irrigation systems from private water intakes.
- Wholesalers and technical retailers – a proven model with universal applications, complementing the range with industrial solutions available without a three-phase installation.
Applications
MH PRO S hydrofor pumps are used in systems drawing and delivering raw water from private water intakes – dug or deep wells – where they provide stable water intake parameters and high operating pressure. The multistage construction combined with the Venturi tube enables water to be drawn from depths of up to 9 metres while maintaining high pumping efficiency. The pumps are not water-treatment devices; when using the water for other purposes, we recommend ensuring appropriate preparation.
The single-phase power supply makes this series a natural choice wherever a three-phase installation is unavailable – in single-family homes, recreational plots and smaller farms, for drawing and delivering raw water, watering or using rainwater. The MH PRO S 230V hydrofor pump works with a diaphragm tank and hydrofor controllers, allowing the configuration to be adapted to a specific installation.
Features
The MH PRO S series is based on a pump body and shaft made of AISI 304 stainless steel, providing high corrosion resistance when working with clean technical water. The PPO polymer impeller and diffuser reduce the weight of the rotating components, while the cast-iron ports and base increase mounting rigidity at higher operating pressure. The asynchronous motor in a closed aluminium housing with external ventilation ensures stable operation even under heavy load.
The SiC/SiC/EPDM mechanical seal – with both sliding rings made of silicon carbide – maintains shaft tightness considerably longer than typical ceramic/graphite combinations, especially during extended, continuous operation. The motor has built-in thermal protection in the winding, protecting the pump against overheating.
- Power supply: 1~230 V
- Pump body: AISI 304 stainless steel
- Shaft and rotor: AISI 304 stainless steel
- Impeller and diffuser: PPO polymer
- Ports and base: cast iron
- Mechanical seal: SiC / SiC / EPDM
- Motor: asynchronous, aluminium housing, external ventilation
- Suction capacity: up to 9 m (Venturi tube)
- Thermal protection built into the motor winding
- Insulation class: F
- Protection rating: IP55
- Maximum liquid temperature: 70°C
- Connection: 1" or 1¼×1¼" (depending on the model)
IPRO – 36 months (3 years) of the manufacturer's warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and water-engineering equipment with quality certificates.
Frequently asked questions
How does the Venturi tube system work in MH PRO S pumps?
The Venturi tube increases the pump's suction capacity, enabling water to be drawn from depths of up to 9 metres without having to fill the suction system before start-up. This solution is particularly useful when the water level in a well varies.
Can the MH PRO S work with a hydrofor controller or diaphragm tank?
Yes, the pump is designed to work with both a diaphragm tank and hydrofor controllers, allowing you to build a complete set that increases and stabilises pressure in the installation.
What is the SiC/SiC material used in the mechanical seal of these pumps?
SiC is silicon carbide (carborundum) – a hard, sintered ceramic material with high resistance to abrasion, corrosion and temperature. In the SiC/SiC designation, both mating seal surfaces are made of this material, making them considerably harder and more mechanically resistant than typical combinations made of oxide ceramics or graphite. As a result, the seal better withstands the presence of fine contaminants in the pumped water and maintains tightness for a longer service life.
Which installations are best suited to the MH PRO S?
The MH PRO S is suitable wherever only a single-phase 230V power supply is available – in single-family homes, recreational plots and farms without a three-phase installation.
How does the MH PRO S series differ from the MH PRO T?
The MH PRO S operates on a single-phase 230V power supply and does not require a three-phase installation, making it easier to connect in homes and smaller farms. The MH PRO T is powered by three-phase electricity (230V or 400V) and is suitable for industrial plants, car washes, or air-conditioning and refrigeration systems where such an installation is already available.
What warranty applies to IPRO MH PRO S pumps?
IPRO MH PRO S pumps are covered by a 36-month (3-year) manufacturer's warranty, while warranty and post-warranty service is provided by Dambat. For maintenance or repairs, it is worth contacting the service department directly.