Description
MH PRO 200/90 T – industrial hydrofor pump
The MH PRO T series by IPRO consists of multistage, self-priming centrifugal pumps powered by three-phase electricity (230 V or 400 V), designed for pumping technically clean, cold raw water from private water sources and for increasing the pressure in systems drawing and delivering this water, in installations with increased performance requirements and continuous operation. As devices from the IPRO range, dedicated to professionals and demanding applications requiring enhanced reliability, they stand out with a Venturi tube system that ensures high suction capacity and a construction based on AISI 304 stainless steel, guaranteeing corrosion resistance even under intensive use.
Who is it for?
- Industrial plants with three-phase installations – car washes, air-conditioning and refrigeration systems benefit from a three-phase motor that withstands continuous loads better than single-phase units of comparable power.
- Contractors carrying out installations with increased water demand – the option of 230V or 400V power supply makes it easier to adapt the pump to the facility’s existing electrical installation.
- Farms and horticultural businesses with access to three-phase power – the model supports extensive irrigation systems.
- Water-system installers – compatibility with a diaphragm tank or a hydrofor controller makes it easier to select a complete set.
Application
MH PRO T hydrofor pumps are used in systems for drawing and delivering raw water with increased performance requirements, supplied from private water sources such as dug or deep wells. The multistage design combined with a Venturi tube enables water to be drawn from depths of up to 9 metres while maintaining high flow and operating pressure. The pumps do not treat water; when using it for other purposes, we recommend ensuring appropriate water preparation.
Three-phase power, available in a 230V or 400V version, means that this series is primarily suitable for facilities that already have such an installation – car washes, air-conditioning and refrigeration systems, and other industrial processes requiring continuous, stable operation under load. The MH PRO T hydrofor pump works with a diaphragm tank and hydrofor controllers, allowing a complete set tailored to a demanding installation to be assembled.
Features
The MH PRO T series is based on a body and shaft made of AISI 304 stainless steel, providing high corrosion resistance when operating with technically clean water. The PPO polymer impeller and diffuser reduce the weight of the rotating components, while the cast-iron ports and base increase mounting rigidity at higher operating pressures. The three-phase asynchronous motor, housed in an aluminium enclosure with external ventilation, ensures stable, continuous operation under the loads typical of industrial installations.
The SiC/SiC/EPDM mechanical seal – with both sliding rings made of silicon carbide – maintains shaft tightness for considerably longer than typical ceramic/graphite combinations, especially during prolonged, continuous operation. The motor has built-in thermal protection in the winding to protect the pump from overheating.
- Power supply: 3~230 V or 3~400 V
- Pump body: AISI 304 stainless steel
- Shaft and rotor: AISI 304 stainless steel
- Impeller and diffuser: PPO polymer
- Ports and base: cast iron
- Mechanical seal: SiC / SiC / EPDM
- Motor: three-phase asynchronous, aluminium housing, external ventilation
- Suction capacity: up to 9 m (Venturi tube)
- Thermal protection built into the motor winding
- Insulation class: F
- Protection rating: IP55
- Max. liquid temperature: 70°C
- Connection: 1¼×1¼"
IPRO – 36 months (3 years) of manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and water-engineering equipment with quality certificates.
Frequently asked questions
How does the Venturi tube system work in MH PRO T pumps?
The Venturi tube increases the pump’s suction capacity, allowing water to be drawn from depths of up to 9 metres without having to fill the suction system before starting. This solution is particularly useful when the water level in the well varies.
What benefit does the option of 230V or 400V power supply provide in MH PRO T pumps?
The MH PRO T three-phase motor can be connected to either a 230V or 400V network, allowing the pump to be adapted to the facility’s existing electrical installation without having to rebuild it.
What is the SiC/SiC material used in the mechanical seal of these pumps?
SiC is silicon carbide (carborundum) – a hard, sintered ceramic material with high resistance to abrasion, corrosion and temperature. In the SiC/SiC designation, both cooperating seal surfaces are made of this material, making them considerably harder and more mechanically resistant than typical combinations involving oxide ceramics or graphite. As a result, the seal better withstands the presence of fine impurities in the pumped water and remains tight for a longer service life.
Which installations are best suited to MH PRO T?
MH PRO T is suitable for facilities with access to three-phase power – car washes, air-conditioning and refrigeration systems, and other industrial processes requiring continuous, stable operation under load.
How does the MH PRO T series differ from MH PRO S?
MH PRO T is powered by three-phase electricity (230V or 400V) and is suitable for industrial plants, car washes, and air-conditioning and refrigeration systems where such an installation is already available. MH PRO S operates on a single-phase 230V supply and does not require a three-phase installation, making it a simpler choice for homes and smaller farms.
What warranty applies to IPRO MH PRO T pumps?
IPRO MH PRO T pumps are covered by a 36-month (3-year) manufacturer’s warranty, while warranty and post-warranty service is provided by Dambat. For maintenance or repairs, it is advisable to contact the service department directly.
- Lift: 78.0 m,
- Capacity: 200.0 l/min.,
- Suction capacity: 9.0 m,
- Power: 2.2 kW,
- Power supply: 3~230 V, 3~400 V,
- Frequency: 50 Hz,
- Current consumption: 4.7 A,
- Motor speed: 2900 rpm. ,
- Insulation class: F,
- Operating mode: continuous,
- Protection rating: IP55,
- Connection: 1¼×1¼",
- Outlet direction: Vertical,
- Operating position: Horizontal,
- Maximum liquid temperature: 70°C,
- Maximum ambient temperature: 50°C,
- Dimensions L/H/W: 55/16/19 cm,
- Weight: 19.4 kg,
MH PRO 200/90 T – industrial hydrofor pump
The MH PRO T series by IPRO consists of multistage, self-priming centrifugal pumps powered by three-phase electricity (230 V or 400 V), designed for pumping technically clean, cold raw water from private water sources and for increasing the pressure in systems drawing and delivering this water, in installations with increased performance requirements and continuous operation. As devices from the IPRO range, dedicated to professionals and demanding applications requiring enhanced reliability, they stand out with a Venturi tube system that ensures high suction capacity and a construction based on AISI 304 stainless steel, guaranteeing corrosion resistance even under intensive use.
Who is it for?
- Industrial plants with three-phase installations – car washes, air-conditioning and refrigeration systems benefit from a three-phase motor that withstands continuous loads better than single-phase units of comparable power.
- Contractors carrying out installations with increased water demand – the option of 230V or 400V power supply makes it easier to adapt the pump to the facility’s existing electrical installation.
- Farms and horticultural businesses with access to three-phase power – the model supports extensive irrigation systems.
- Water-system installers – compatibility with a diaphragm tank or a hydrofor controller makes it easier to select a complete set.
Application
MH PRO T hydrofor pumps are used in systems for drawing and delivering raw water with increased performance requirements, supplied from private water sources such as dug or deep wells. The multistage design combined with a Venturi tube enables water to be drawn from depths of up to 9 metres while maintaining high flow and operating pressure. The pumps do not treat water; when using it for other purposes, we recommend ensuring appropriate water preparation.
Three-phase power, available in a 230V or 400V version, means that this series is primarily suitable for facilities that already have such an installation – car washes, air-conditioning and refrigeration systems, and other industrial processes requiring continuous, stable operation under load. The MH PRO T hydrofor pump works with a diaphragm tank and hydrofor controllers, allowing a complete set tailored to a demanding installation to be assembled.
Features
The MH PRO T series is based on a body and shaft made of AISI 304 stainless steel, providing high corrosion resistance when operating with technically clean water. The PPO polymer impeller and diffuser reduce the weight of the rotating components, while the cast-iron ports and base increase mounting rigidity at higher operating pressures. The three-phase asynchronous motor, housed in an aluminium enclosure with external ventilation, ensures stable, continuous operation under the loads typical of industrial installations.
The SiC/SiC/EPDM mechanical seal – with both sliding rings made of silicon carbide – maintains shaft tightness for considerably longer than typical ceramic/graphite combinations, especially during prolonged, continuous operation. The motor has built-in thermal protection in the winding to protect the pump from overheating.
- Power supply: 3~230 V or 3~400 V
- Pump body: AISI 304 stainless steel
- Shaft and rotor: AISI 304 stainless steel
- Impeller and diffuser: PPO polymer
- Ports and base: cast iron
- Mechanical seal: SiC / SiC / EPDM
- Motor: three-phase asynchronous, aluminium housing, external ventilation
- Suction capacity: up to 9 m (Venturi tube)
- Thermal protection built into the motor winding
- Insulation class: F
- Protection rating: IP55
- Max. liquid temperature: 70°C
- Connection: 1¼×1¼"
IPRO – 36 months (3 years) of manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and water-engineering equipment with quality certificates.
Frequently asked questions
How does the Venturi tube system work in MH PRO T pumps?
The Venturi tube increases the pump’s suction capacity, allowing water to be drawn from depths of up to 9 metres without having to fill the suction system before starting. This solution is particularly useful when the water level in the well varies.
What benefit does the option of 230V or 400V power supply provide in MH PRO T pumps?
The MH PRO T three-phase motor can be connected to either a 230V or 400V network, allowing the pump to be adapted to the facility’s existing electrical installation without having to rebuild it.
What is the SiC/SiC material used in the mechanical seal of these pumps?
SiC is silicon carbide (carborundum) – a hard, sintered ceramic material with high resistance to abrasion, corrosion and temperature. In the SiC/SiC designation, both cooperating seal surfaces are made of this material, making them considerably harder and more mechanically resistant than typical combinations involving oxide ceramics or graphite. As a result, the seal better withstands the presence of fine impurities in the pumped water and remains tight for a longer service life.
Which installations are best suited to MH PRO T?
MH PRO T is suitable for facilities with access to three-phase power – car washes, air-conditioning and refrigeration systems, and other industrial processes requiring continuous, stable operation under load.
How does the MH PRO T series differ from MH PRO S?
MH PRO T is powered by three-phase electricity (230V or 400V) and is suitable for industrial plants, car washes, and air-conditioning and refrigeration systems where such an installation is already available. MH PRO S operates on a single-phase 230V supply and does not require a three-phase installation, making it a simpler choice for homes and smaller farms.
What warranty applies to IPRO MH PRO T pumps?
IPRO MH PRO T pumps are covered by a 36-month (3-year) manufacturer’s warranty, while warranty and post-warranty service is provided by Dambat. For maintenance or repairs, it is advisable to contact the service department directly.