Description
MH PRO 200/75 T – industrial booster pump
The MH PRO T series by IPRO consists of multistage, self-priming centrifugal pumps powered by three-phase electricity (230 V or 400 V), designed for pumping clean technical water and cold raw water from private water sources, as well as for increasing the pressure in water intake and discharge systems where higher capacity and continuous operation are required. As IPRO products intended for professionals and demanding applications requiring increased reliability, they feature a Venturi tube system that provides high suction capacity and a construction based on AISI 304 stainless steel, ensuring corrosion resistance even under intensive use.
Who it is for
- Industrial facilities with three-phase electrical systems – car washes, air-conditioning systems, and refrigeration systems benefit from a three-phase motor that withstands continuous loads better than single-phase units of comparable power.
- Contractors carrying out installations with increased water demand – the option of 230V or 400V power supply makes it easier to adapt the pump to the facility’s existing electrical system.
- Farms and horticultural businesses with access to three-phase power – the model supports extensive irrigation systems.
- Water system installers – compatibility with a diaphragm tank or a booster set controller makes it easier to select a complete system.
Applications
MH PRO T series booster pumps are used in raw-water intake and discharge systems with increased capacity requirements, supplied from private water sources such as dug or deep wells. The multistage design combined with a Venturi tube allows water to be drawn from depths of up to 9 metres while maintaining high capacity and operating pressure. The pumps do not treat water; when using the water for other purposes, we recommend ensuring suitable treatment.
The three-phase power supply, available in a 230V or 400V version, means that this series is primarily suitable for facilities that already have such an electrical system, including car washes, air-conditioning and refrigeration systems, and other industrial processes requiring continuous, stable operation under load. The MH PRO T booster pump works with a diaphragm tank and booster set controllers, allowing a complete system to be built for demanding installations.
Features
The MH PRO T series is based on a pump body and shaft made of AISI 304 stainless steel, providing high corrosion resistance when operating with clean technical water. The PPO polymer impeller and diffuser reduce the weight of the rotating components, while the cast-iron ports and base increase mounting rigidity at higher operating pressures. The three-phase asynchronous motor, housed in an aluminium enclosure with external ventilation, ensures stable, continuous operation under loads typical of industrial installations.
The SiC/SiC/EPDM mechanical seal – with both sliding rings made of silicon carbide – maintains shaft tightness significantly longer than typical ceramic/graphite combinations, especially during prolonged, continuous operation. The motor has built-in thermal protection in the winding, protecting the pump against overheating.
- Power supply: 3~230 V or 3~400 V
- Pump body: AISI 304 stainless steel
- Shaft and rotor: AISI 304 stainless steel
- Impeller and diffuser: PPO polymer
- Ports and base: cast iron
- Mechanical seal: SiC / SiC / EPDM
- Motor: three-phase asynchronous, aluminium enclosure, external ventilation
- Suction capacity: up to 9 m (Venturi tube)
- Thermal protection built into the motor winding
- Insulation class: F
- Protection rating: IP55
- Maximum liquid temperature: 70°C
- Connection: 1" or 1¼×1¼" (depending on the model)
IPRO – 36-month (3-year) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certificates.
Frequently asked questions
How does the Venturi tube system work in MH PRO T pumps?
The Venturi tube increases the pump’s suction capacity, allowing water to be drawn from depths of up to 9 metres without having to fill the suction system before starting. This solution is particularly useful when the water level in the well fluctuates.
What is the benefit of the 230V or 400V power supply option in MH PRO T pumps?
The MH PRO T three-phase motor can be connected to either a 230V or 400V power supply, allowing the pump to be adapted to the facility’s existing electrical system without having to modify it.
What is the SiC/SiC material used in the mechanical seal of these pumps?
SiC is silicon carbide (carborundum) – a hard, sintered ceramic material with high resistance to abrasion, corrosion, and temperature. In the SiC/SiC designation, both mating surfaces of the mechanical seal are made of this material, making them significantly harder and more mechanically resistant than typical combinations made of oxide ceramics or graphite. As a result, the seal better withstands the presence of fine impurities in the pumped water and remains tight for a longer service life.
Which installations are best suited to MH PRO T?
MH PRO T is suitable for facilities with access to three-phase power, including car washes, air-conditioning and refrigeration systems, and other industrial processes requiring continuous, stable operation under load.
How does the MH PRO T series differ from MH PRO S?
MH PRO T is powered by three-phase electricity (230V or 400V) and is suitable for industrial facilities, car washes, and air-conditioning and refrigeration systems where such an electrical system is already available. MH PRO S operates on a single-phase 230V power supply and does not require a three-phase electrical system, making it a simpler choice for homes and smaller farms.
What warranty applies to IPRO MH PRO T pumps?
IPRO MH PRO T pumps are covered by a 36-month (3-year) manufacturer’s warranty, while warranty and post-warranty service is provided by Dambat. For maintenance or repair matters, it is worth contacting the service department directly.
- Lift: 66.0 m,
- Capacity: 200.0 l/min.,
- Suction capacity: 9.0 m,
- Power: 1.85 kW,
- Power supply: 3~230 V, 3~400 V,
- Frequency: 50 Hz,
- Current consumption: 4.0 A,
- Motor speed: 2900 rpm. ,
- Insulation class: F,
- Operating mode: continuous,
- Protection rating: IP55,
- Connection: 1¼x1¼",
- Outlet direction: Vertical,
- Operating position: Horizontal,
- Maximum liquid temperature: 70°C,
- Maximum ambient temperature: 50°C,
- Dimensions L/H/W: 52/16/19 cm,
- Weight: 18.8 kg,
MH PRO 200/75 T – industrial booster pump
The MH PRO T series by IPRO consists of multistage, self-priming centrifugal pumps powered by three-phase electricity (230 V or 400 V), designed for pumping clean technical water and cold raw water from private water sources, as well as for increasing the pressure in water intake and discharge systems where higher capacity and continuous operation are required. As IPRO products intended for professionals and demanding applications requiring increased reliability, they feature a Venturi tube system that provides high suction capacity and a construction based on AISI 304 stainless steel, ensuring corrosion resistance even under intensive use.
Who it is for
- Industrial facilities with three-phase electrical systems – car washes, air-conditioning systems, and refrigeration systems benefit from a three-phase motor that withstands continuous loads better than single-phase units of comparable power.
- Contractors carrying out installations with increased water demand – the option of 230V or 400V power supply makes it easier to adapt the pump to the facility’s existing electrical system.
- Farms and horticultural businesses with access to three-phase power – the model supports extensive irrigation systems.
- Water system installers – compatibility with a diaphragm tank or a booster set controller makes it easier to select a complete system.
Applications
MH PRO T series booster pumps are used in raw-water intake and discharge systems with increased capacity requirements, supplied from private water sources such as dug or deep wells. The multistage design combined with a Venturi tube allows water to be drawn from depths of up to 9 metres while maintaining high capacity and operating pressure. The pumps do not treat water; when using the water for other purposes, we recommend ensuring suitable treatment.
The three-phase power supply, available in a 230V or 400V version, means that this series is primarily suitable for facilities that already have such an electrical system, including car washes, air-conditioning and refrigeration systems, and other industrial processes requiring continuous, stable operation under load. The MH PRO T booster pump works with a diaphragm tank and booster set controllers, allowing a complete system to be built for demanding installations.
Features
The MH PRO T series is based on a pump body and shaft made of AISI 304 stainless steel, providing high corrosion resistance when operating with clean technical water. The PPO polymer impeller and diffuser reduce the weight of the rotating components, while the cast-iron ports and base increase mounting rigidity at higher operating pressures. The three-phase asynchronous motor, housed in an aluminium enclosure with external ventilation, ensures stable, continuous operation under loads typical of industrial installations.
The SiC/SiC/EPDM mechanical seal – with both sliding rings made of silicon carbide – maintains shaft tightness significantly longer than typical ceramic/graphite combinations, especially during prolonged, continuous operation. The motor has built-in thermal protection in the winding, protecting the pump against overheating.
- Power supply: 3~230 V or 3~400 V
- Pump body: AISI 304 stainless steel
- Shaft and rotor: AISI 304 stainless steel
- Impeller and diffuser: PPO polymer
- Ports and base: cast iron
- Mechanical seal: SiC / SiC / EPDM
- Motor: three-phase asynchronous, aluminium enclosure, external ventilation
- Suction capacity: up to 9 m (Venturi tube)
- Thermal protection built into the motor winding
- Insulation class: F
- Protection rating: IP55
- Maximum liquid temperature: 70°C
- Connection: 1" or 1¼×1¼" (depending on the model)
IPRO – 36-month (3-year) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certificates.
Frequently asked questions
How does the Venturi tube system work in MH PRO T pumps?
The Venturi tube increases the pump’s suction capacity, allowing water to be drawn from depths of up to 9 metres without having to fill the suction system before starting. This solution is particularly useful when the water level in the well fluctuates.
What is the benefit of the 230V or 400V power supply option in MH PRO T pumps?
The MH PRO T three-phase motor can be connected to either a 230V or 400V power supply, allowing the pump to be adapted to the facility’s existing electrical system without having to modify it.
What is the SiC/SiC material used in the mechanical seal of these pumps?
SiC is silicon carbide (carborundum) – a hard, sintered ceramic material with high resistance to abrasion, corrosion, and temperature. In the SiC/SiC designation, both mating surfaces of the mechanical seal are made of this material, making them significantly harder and more mechanically resistant than typical combinations made of oxide ceramics or graphite. As a result, the seal better withstands the presence of fine impurities in the pumped water and remains tight for a longer service life.
Which installations are best suited to MH PRO T?
MH PRO T is suitable for facilities with access to three-phase power, including car washes, air-conditioning and refrigeration systems, and other industrial processes requiring continuous, stable operation under load.
How does the MH PRO T series differ from MH PRO S?
MH PRO T is powered by three-phase electricity (230V or 400V) and is suitable for industrial facilities, car washes, and air-conditioning and refrigeration systems where such an electrical system is already available. MH PRO S operates on a single-phase 230V power supply and does not require a three-phase electrical system, making it a simpler choice for homes and smaller farms.
What warranty applies to IPRO MH PRO T pumps?
IPRO MH PRO T pumps are covered by a 36-month (3-year) manufacturer’s warranty, while warranty and post-warranty service is provided by Dambat. For maintenance or repair matters, it is worth contacting the service department directly.