Description
MH PRO 200/60 S – industrial hydrofor pump
The IPRO MH PRO S series consists of single-phase (230 V) multistage, self-priming centrifugal pumps designed for pumping technically clean, cold raw water from private water sources and for increasing the pressure in water intake and delivery systems with elevated requirements. As devices from the IPRO line, dedicated to professionals and applications requiring increased reliability, they stand out with a Venturi tube system that provides high suction capacity and a design based on AISI 304 stainless steel, ensuring corrosion resistance even under intensive use.
Who it is for
- Single-family homes and farms without a three-phase installation – the 230 V power supply allows the pump to be connected to a standard socket, without the need to install a separate three-phase line.
- Water system installers – compatibility with a diaphragm tank or hydrofor controller makes it easier to select a complete set.
- Farms and horticultural businesses – the pump effectively supplies irrigation systems from private water sources.
- Wholesalers and technical retail outlets – a proven model with versatile applications, complementing the range with industrial solutions available without a three-phase installation.
Application
MH PRO S series hydrofor pumps are used in raw water intake and delivery systems supplied from private water sources—dug or deep wells—where they ensure stable water intake parameters and high operating pressure. The multistage design combined with a Venturi tube enables water suction from depths of up to 9 meters while maintaining high pumping efficiency. The pumps are not water treatment devices; when using the water for other purposes, we recommend ensuring appropriate treatment.
The single-phase power supply makes this series a natural choice where there is no access to a three-phase installation – in single-family homes, recreational plots and smaller farms, for drawing and pumping raw water, watering or using rainwater. The MH PRO S 230V hydrofor pump works with a diaphragm tank and hydrofor controllers, allowing the system configuration to be adapted to the specific installation.
Features
The MH PRO S series is based on a body and shaft made of AISI 304 stainless steel, ensuring high corrosion resistance when operating with technically clean water. The PPO polymer impeller and diffuser reduce the weight of the rotating components, while the cast-iron connections and base increase mounting rigidity at higher operating pressure. The asynchronous motor in a closed aluminium housing with external ventilation ensures stable operation even under heavy load.
The SiC/SiC/EPDM mechanical seal – with both sliding rings made of silicon carbide – maintains shaft tightness significantly longer than typical ceramic/graphite combinations, especially during prolonged continuous operation. The motor has built-in thermal protection in the winding, protecting the pump from overheating.
- Power supply: 1~230 V
- Pump body: AISI 304 stainless steel
- Shaft and rotor: AISI 304 stainless steel
- Impeller and diffuser: PPO polymer
- Connections and base: cast iron
- Mechanical seal: SiC / SiC / EPDM
- Motor: asynchronous, aluminium housing, external ventilation
- Suction capacity: up to 9 m (Venturi tube)
- Thermal protection built into the motor winding
- Insulation class: F
- Protection rating: IP55
- Max. liquid temperature: 70°C
- Connection: 1" or 1¼×1¼" (depending on the model)
IPRO – 36 months (3 years) of the manufacturer's warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions
How does the Venturi tube system work in MH PRO S pumps?
The Venturi tube increases the pump's suction capacity, enabling it to draw water from depths of up to 9 meters without the need to prime the suction system before start-up. This solution is particularly useful when the water level in the well varies.
Can the MH PRO S work with a hydrofor controller or a diaphragm tank?
Yes, the pump is designed to work with both a diaphragm tank and hydrofor controllers, allowing you to build a complete system that boosts and stabilizes pressure in the installation.
What is the SiC/SiC material used in the mechanical seal of these pumps?
SiC is silicon carbide (carborundum)—a hard, sintered ceramic material with high resistance to abrasion, corrosion, and temperature. In the SiC/SiC designation, both mating surfaces of the mechanical seal are made of this material, making them significantly harder and more mechanically resistant than typical combinations of oxide ceramics or graphite. As a result, the seal better withstands the presence of fine impurities in the pumped water and remains leak-tight for a longer service life.
Which installations are best suited for MH PRO S?
MH PRO S is suitable wherever only a single-phase 230V power supply is available—in single-family homes, recreational plots, and farms without a three-phase installation.
What is the difference between the MH PRO S and MH PRO T series?
MH PRO S operates on a single-phase 230V power supply and does not require a three-phase installation, making it easier to connect in homes and smaller farms. MH PRO T is powered by three-phase electricity (230V or 400V) and is suitable for industrial plants, car washes, and air-conditioning and refrigeration systems where such an installation is already available.
What warranty applies to IPRO MH PRO S pumps?
IPRO MH PRO S pumps come with a 36-month (3-year) manufacturer's warranty, while warranty and post-warranty service is provided by Dambat. For maintenance or repairs, it is recommended to contact the service department directly.
- Lift: 53.0 m,
- Capacity: 200.0 l/min.,
- Suction capacity: 9.0 m,
- Power: 1.5 kW,
- Power supply: 1~230 V,
- Frequency: 50 Hz,
- Current consumption: 9.2 A,
- Motor speed: 2900 rpm. ,
- Insulation class: F,
- Operating mode: continuous,
- Protection rating: IP55,
- Connection: 1¼x1¼",
- Outlet direction: Vertical,
- Operating position: Horizontal,
- Maximum liquid temperature: 70°C,
- Maximum ambient temperature: 50°C,
- Dimensions L/H/W: 49/21/18 cm,
- Weight: 41.0 kg,
MH PRO 200/60 S – industrial hydrofor pump
The IPRO MH PRO S series consists of single-phase (230 V) multistage, self-priming centrifugal pumps designed for pumping technically clean, cold raw water from private water sources and for increasing the pressure in water intake and delivery systems with elevated requirements. As devices from the IPRO line, dedicated to professionals and applications requiring increased reliability, they stand out with a Venturi tube system that provides high suction capacity and a design based on AISI 304 stainless steel, ensuring corrosion resistance even under intensive use.
Who it is for
- Single-family homes and farms without a three-phase installation – the 230 V power supply allows the pump to be connected to a standard socket, without the need to install a separate three-phase line.
- Water system installers – compatibility with a diaphragm tank or hydrofor controller makes it easier to select a complete set.
- Farms and horticultural businesses – the pump effectively supplies irrigation systems from private water sources.
- Wholesalers and technical retail outlets – a proven model with versatile applications, complementing the range with industrial solutions available without a three-phase installation.
Application
MH PRO S series hydrofor pumps are used in raw water intake and delivery systems supplied from private water sources—dug or deep wells—where they ensure stable water intake parameters and high operating pressure. The multistage design combined with a Venturi tube enables water suction from depths of up to 9 meters while maintaining high pumping efficiency. The pumps are not water treatment devices; when using the water for other purposes, we recommend ensuring appropriate treatment.
The single-phase power supply makes this series a natural choice where there is no access to a three-phase installation – in single-family homes, recreational plots and smaller farms, for drawing and pumping raw water, watering or using rainwater. The MH PRO S 230V hydrofor pump works with a diaphragm tank and hydrofor controllers, allowing the system configuration to be adapted to the specific installation.
Features
The MH PRO S series is based on a body and shaft made of AISI 304 stainless steel, ensuring high corrosion resistance when operating with technically clean water. The PPO polymer impeller and diffuser reduce the weight of the rotating components, while the cast-iron connections and base increase mounting rigidity at higher operating pressure. The asynchronous motor in a closed aluminium housing with external ventilation ensures stable operation even under heavy load.
The SiC/SiC/EPDM mechanical seal – with both sliding rings made of silicon carbide – maintains shaft tightness significantly longer than typical ceramic/graphite combinations, especially during prolonged continuous operation. The motor has built-in thermal protection in the winding, protecting the pump from overheating.
- Power supply: 1~230 V
- Pump body: AISI 304 stainless steel
- Shaft and rotor: AISI 304 stainless steel
- Impeller and diffuser: PPO polymer
- Connections and base: cast iron
- Mechanical seal: SiC / SiC / EPDM
- Motor: asynchronous, aluminium housing, external ventilation
- Suction capacity: up to 9 m (Venturi tube)
- Thermal protection built into the motor winding
- Insulation class: F
- Protection rating: IP55
- Max. liquid temperature: 70°C
- Connection: 1" or 1¼×1¼" (depending on the model)
IPRO – 36 months (3 years) of the manufacturer's warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions
How does the Venturi tube system work in MH PRO S pumps?
The Venturi tube increases the pump's suction capacity, enabling it to draw water from depths of up to 9 meters without the need to prime the suction system before start-up. This solution is particularly useful when the water level in the well varies.
Can the MH PRO S work with a hydrofor controller or a diaphragm tank?
Yes, the pump is designed to work with both a diaphragm tank and hydrofor controllers, allowing you to build a complete system that boosts and stabilizes pressure in the installation.
What is the SiC/SiC material used in the mechanical seal of these pumps?
SiC is silicon carbide (carborundum)—a hard, sintered ceramic material with high resistance to abrasion, corrosion, and temperature. In the SiC/SiC designation, both mating surfaces of the mechanical seal are made of this material, making them significantly harder and more mechanically resistant than typical combinations of oxide ceramics or graphite. As a result, the seal better withstands the presence of fine impurities in the pumped water and remains leak-tight for a longer service life.
Which installations are best suited for MH PRO S?
MH PRO S is suitable wherever only a single-phase 230V power supply is available—in single-family homes, recreational plots, and farms without a three-phase installation.
What is the difference between the MH PRO S and MH PRO T series?
MH PRO S operates on a single-phase 230V power supply and does not require a three-phase installation, making it easier to connect in homes and smaller farms. MH PRO T is powered by three-phase electricity (230V or 400V) and is suitable for industrial plants, car washes, and air-conditioning and refrigeration systems where such an installation is already available.
What warranty applies to IPRO MH PRO S pumps?
IPRO MH PRO S pumps come with a 36-month (3-year) manufacturer's warranty, while warranty and post-warranty service is provided by Dambat. For maintenance or repairs, it is recommended to contact the service department directly.