MH PRO 120/80 T – industrial pressure booster pump
The IPRO MH PRO T series comprises multistage, self-priming centrifugal pumps powered by three-phase electricity (230 V or 400 V). They are designed to pump clean, cold, raw water from private water sources and to boost pressure in systems that draw and pump this water, where high flow rates and continuous operation are required. As products in IPRO’s range for professionals and demanding applications requiring enhanced reliability, they feature a Venturi tube that provides high suction capacity and a design based on AISI 304 stainless steel, ensuring corrosion resistance even under intensive use.
Who it’s for
- Industrial facilities with three-phase installations – car washes, air conditioning systems, and refrigeration systems benefit from a three-phase motor that handles continuous loads better than single-phase units of comparable power.
- Contractors installing systems with high water demand – the option of 230V or 400V power makes it easier to match the pump to the building’s existing electrical installation.
- Farms and horticultural businesses with access to three-phase power – this model supports extensive irrigation systems.
- Water system installers – compatibility with a diaphragm pressure tank or pressure pump controller makes it easier to select a complete system.
Applications
The MH PRO T series pressure booster pumps are used in systems for drawing and pumping raw water where higher flow rates are required, supplied from private water sources such as dug or deep wells. Their multistage design combined with a Venturi tube allows them to draw water from depths of up to 9 meters while maintaining high flow rates and operating pressure. The pumps do not treat water; if using the water for other purposes, we recommend ensuring it is treated appropriately.
Three-phase power supply, available in 230V or 400V variants, makes this series suitable primarily for facilities that already have such an installation – car washes, air conditioning and refrigeration systems, and other industrial processes requiring continuous, stable operation under load. The MH PRO T pressure booster pump works with a diaphragm tank and pressure booster controls, allowing you to build a complete set tailored to demanding installations.
Features
The MH PRO T series is built around a body and shaft made of AISI 304 stainless steel, providing high corrosion resistance when pumping clean water. The PPO polymer impeller and diffuser reduce the weight of rotating components, while the cast-iron ports and base increase mounting rigidity at higher operating pressures. The three-phase asynchronous motor in a closed aluminum housing with external ventilation ensures stable, continuous operation under the loads typical of industrial installations.
The SiC/SiC/EPDM mechanical seal – with both sliding rings made of silicon carbide – maintains shaft tightness much longer than typical ceramic/graphite combinations, especially during prolonged continuous operation. The motor has thermal protection built into its winding to protect the pump from overheating.
- Power supply: 3~230 V or 3~400 V
- Pump body: AISI 304 stainless steel
- Shaft and rotor: AISI 304 stainless steel
- Impeller and diffuser: PPO polymer
- Ports and base: cast iron
- Mechanical seal: SiC / SiC / EPDM
- Motor: three-phase asynchronous, aluminum housing, external ventilation
- Suction capacity: up to 9 m (Venturi tube)
- Thermal protection built into the motor winding
- Insulation class: F
- Protection rating: IP55
- Max. liquid temperature: 70°C
- Connection: 1" or 1¼×1¼" (depending on the model)
IPRO – 36-month (3-year) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – trusted manufacturer of pumps and water engineering equipment with quality certifications.
Frequently asked questions
How does the Venturi tube system work in MH PRO T pumps?
The Venturi tube increases the pump's suction capacity, allowing it to draw water from depths of up to 9 meters without having to prime the suction system before startup. This is especially useful when the water level in a well varies.
What is the benefit of the MH PRO T pumps' ability to run on 230V or 400V power?
The MH PRO T three-phase motor can be connected to either a 230V or 400V power supply, allowing the pump to be matched to the facility's existing electrical installation without the need to modify it.
What is the SiC/SiC material used in these pumps' mechanical seal?
SiC is silicon carbide (carborundum), a hard, sintered ceramic material with high resistance to abrasion, corrosion, and heat. W In the SiC/SiC designation, both mating seal faces are made of this material, making them much harder and more mechanically resistant than typical oxide ceramic or graphite combinations. As a result, the seal better withstands small impurities in the pumped water and remains leak-tight for longer during operation.
What types of installations is the MH PRO T best suited for?
The MH PRO T is suitable for facilities with access to three-phase power, such as car washes, air conditioning and refrigeration systems, and other industrial processes that require continuous, stable operation under load.
How does the MH PRO T series differ from the MH PRO S?
The MH PRO T is powered by three-phase electricity (230V or 400V) and is suitable for industrial plants, car washes, or air conditioning and refrigeration systems where this type of installation is already available. The MH PRO S runs on single-phase 230V power and does not require a three-phase installation, making it a simpler choice for homes and smaller farms.
What warranty applies to IPRO MH PRO T pumps?
MH PRO T pumps by IPRO come with a 36-month (3-year) manufacturer’s warranty, and Dambat provides both warranty and post-warranty service. W For maintenance or repairs, it’s best to contact the service department directly.
