Description
MH PRO 120/65 S – industrial booster pump
The IPRO MH PRO S series consists of single-phase (230 V) multistage self-priming centrifugal pumps designed for pumping clean, technically suitable cold raw water from private water sources and for increasing pressure in systems for drawing and pressurizing this water, including installations with increased requirements. As products from the IPRO line, dedicated to professionals and demanding applications requiring enhanced reliability, they feature a Venturi tube system that ensures high suction capacity and a design based on AISI 304 stainless steel, guaranteeing corrosion resistance even under intensive use.
Who is it for
- Single-family homes and farms without a three-phase installation – the 230V power supply allows the pump to be connected to a standard socket, without the need to install a separate three-phase line.
- Water system installers – compatibility with a diaphragm tank or booster pump controller makes it easier to select a complete set.
- Farms and horticultural businesses – the pump performs well when supplying irrigation systems from private water sources.
- Technical wholesalers and sales outlets – a proven model with universal applications, complementing the range with industrial solutions that do not require a three-phase installation.
Applications
MH PRO S series booster pumps are used in systems for drawing and pressurizing raw water supplied from private water sources—dug or deep wells—where they ensure stable water intake performance and high operating pressure. The multistage design combined with a Venturi tube enables water to be drawn from depths of up to 9 meters while maintaining high pumping efficiency. The pumps do not treat water; if the water is to be used for other purposes, we recommend ensuring appropriate treatment.
The single-phase power supply makes this series a natural choice wherever three-phase power is unavailable – in single-family homes, recreational plots, and smaller farms, for drawing and pumping raw water, irrigation, or rainwater use. The MH PRO S 230V hydrofor pump works with a diaphragm tank and hydrofor controllers, allowing the system configuration to be adapted to the specific installation.
Features
The MH PRO S series is built around a casing and shaft made of AISI 304 stainless steel, providing high corrosion resistance when operating with technically clean water. The PPO polymer impeller and diffuser reduce the mass of the rotating components, while the cast-iron connections and base increase mounting rigidity at higher operating pressures. The asynchronous motor in a closed aluminum housing with external ventilation ensures stable operation even under heavy load.
The SiC/SiC/EPDM mechanical seal – with both sliding rings made of silicon carbide – maintains shaft tightness significantly longer than typical ceramic/graphite combinations, especially during extended continuous operation. The motor has built-in thermal protection in the winding, protecting the pump from overheating.
- Power supply: 1~230 V
- Pump casing: AISI 304 stainless steel
- Shaft and rotor: AISI 304 stainless steel
- Impeller and diffuser: PPO polymer
- Connections and base: cast iron
- Mechanical seal: SiC / SiC / EPDM
- Motor: asynchronous, aluminum housing, external ventilation
- Suction capacity: up to 9 m (Venturi tube)
- Thermal protection built into the motor winding
- Insulation class: F
- Protection rating: IP55
- Max. liquid temperature: 70°C
- Connection: 1" or 1¼×1¼" (depending on the model)
IPRO – 36 months (3 years) of manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions
How does the Venturi tube system work in MH PRO S pumps?
The Venturi tube increases the pump's suction capacity, allowing it to draw water from depths of up to 9 meters without having to prime the suction system before startup. This solution is particularly useful when the water level in the well varies.
Can the MH PRO S operate with a hydrofor controller or a diaphragm tank?
Yes, the pump is designed to work with both a diaphragm tank and hydrofor controllers, allowing you to build a complete system for increasing and stabilizing pressure in the installation.
What is the SiC/SiC material used in the mechanical seal of these pumps?
SiC is silicon carbide (carborundum)—a hard, sintered ceramic substance with high resistance to abrasion, corrosion, and temperature. In the SiC/SiC designation, both cooperating surfaces of the mechanical seal are made of this material, making them significantly harder and more mechanically resistant than typical combinations of oxide ceramics or graphite. As a result, the seal better withstands the presence of fine impurities in the pumped water and remains leak-tight for a longer service life.
Which installations are best suited for the MH PRO S?
The MH PRO S is suitable wherever only a single-phase 230V power supply is available—in detached houses, holiday plots, and farms without a three-phase installation.
What is the difference between the MH PRO S and MH PRO T series?
The MH PRO S operates on a single-phase 230V power supply and does not require a three-phase installation, making it easier to connect in homes and smaller farms. The MH PRO T is powered by three-phase electricity (230V or 400V) and is suitable for industrial plants, car washes, and air-conditioning and refrigeration systems where such an installation is already available.
What warranty applies to IPRO MH PRO S pumps?
IPRO MH PRO S pumps are covered by a 36-month (3-year) manufacturer's warranty, while warranty and post-warranty service is provided by Dambat. For maintenance or repairs, it is advisable to contact the service department directly.
- Lift: 65.0 m,
- Capacity: 120.0 l/min.,
- Suction capacity: 9.0 m,
- Power: 1.5 kW,
- Power supply: 1~230 V,
- Frequency: 50 Hz,
- Current consumption: 9.2 A,
- Motor speed: 2900 rpm. ,
- Insulation class: F,
- Operating mode: continuous,
- Protection rating: IP55,
- Connection: 1x1",
- Outlet direction: Vertical,
- Operating position: Horizontal,
- Maximum liquid temperature: 70°C,
- Maximum ambient temperature: 50°C,
- Dimensions L/H/W: 49/21/17 cm,
- Weight: 13.1 kg,
MH PRO 120/65 S – industrial booster pump
The IPRO MH PRO S series consists of single-phase (230 V) multistage self-priming centrifugal pumps designed for pumping clean, technically suitable cold raw water from private water sources and for increasing pressure in systems for drawing and pressurizing this water, including installations with increased requirements. As products from the IPRO line, dedicated to professionals and demanding applications requiring enhanced reliability, they feature a Venturi tube system that ensures high suction capacity and a design based on AISI 304 stainless steel, guaranteeing corrosion resistance even under intensive use.
Who is it for
- Single-family homes and farms without a three-phase installation – the 230V power supply allows the pump to be connected to a standard socket, without the need to install a separate three-phase line.
- Water system installers – compatibility with a diaphragm tank or booster pump controller makes it easier to select a complete set.
- Farms and horticultural businesses – the pump performs well when supplying irrigation systems from private water sources.
- Technical wholesalers and sales outlets – a proven model with universal applications, complementing the range with industrial solutions that do not require a three-phase installation.
Applications
MH PRO S series booster pumps are used in systems for drawing and pressurizing raw water supplied from private water sources—dug or deep wells—where they ensure stable water intake performance and high operating pressure. The multistage design combined with a Venturi tube enables water to be drawn from depths of up to 9 meters while maintaining high pumping efficiency. The pumps do not treat water; if the water is to be used for other purposes, we recommend ensuring appropriate treatment.
The single-phase power supply makes this series a natural choice wherever three-phase power is unavailable – in single-family homes, recreational plots, and smaller farms, for drawing and pumping raw water, irrigation, or rainwater use. The MH PRO S 230V hydrofor pump works with a diaphragm tank and hydrofor controllers, allowing the system configuration to be adapted to the specific installation.
Features
The MH PRO S series is built around a casing and shaft made of AISI 304 stainless steel, providing high corrosion resistance when operating with technically clean water. The PPO polymer impeller and diffuser reduce the mass of the rotating components, while the cast-iron connections and base increase mounting rigidity at higher operating pressures. The asynchronous motor in a closed aluminum housing with external ventilation ensures stable operation even under heavy load.
The SiC/SiC/EPDM mechanical seal – with both sliding rings made of silicon carbide – maintains shaft tightness significantly longer than typical ceramic/graphite combinations, especially during extended continuous operation. The motor has built-in thermal protection in the winding, protecting the pump from overheating.
- Power supply: 1~230 V
- Pump casing: AISI 304 stainless steel
- Shaft and rotor: AISI 304 stainless steel
- Impeller and diffuser: PPO polymer
- Connections and base: cast iron
- Mechanical seal: SiC / SiC / EPDM
- Motor: asynchronous, aluminum housing, external ventilation
- Suction capacity: up to 9 m (Venturi tube)
- Thermal protection built into the motor winding
- Insulation class: F
- Protection rating: IP55
- Max. liquid temperature: 70°C
- Connection: 1" or 1¼×1¼" (depending on the model)
IPRO – 36 months (3 years) of manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions
How does the Venturi tube system work in MH PRO S pumps?
The Venturi tube increases the pump's suction capacity, allowing it to draw water from depths of up to 9 meters without having to prime the suction system before startup. This solution is particularly useful when the water level in the well varies.
Can the MH PRO S operate with a hydrofor controller or a diaphragm tank?
Yes, the pump is designed to work with both a diaphragm tank and hydrofor controllers, allowing you to build a complete system for increasing and stabilizing pressure in the installation.
What is the SiC/SiC material used in the mechanical seal of these pumps?
SiC is silicon carbide (carborundum)—a hard, sintered ceramic substance with high resistance to abrasion, corrosion, and temperature. In the SiC/SiC designation, both cooperating surfaces of the mechanical seal are made of this material, making them significantly harder and more mechanically resistant than typical combinations of oxide ceramics or graphite. As a result, the seal better withstands the presence of fine impurities in the pumped water and remains leak-tight for a longer service life.
Which installations are best suited for the MH PRO S?
The MH PRO S is suitable wherever only a single-phase 230V power supply is available—in detached houses, holiday plots, and farms without a three-phase installation.
What is the difference between the MH PRO S and MH PRO T series?
The MH PRO S operates on a single-phase 230V power supply and does not require a three-phase installation, making it easier to connect in homes and smaller farms. The MH PRO T is powered by three-phase electricity (230V or 400V) and is suitable for industrial plants, car washes, and air-conditioning and refrigeration systems where such an installation is already available.
What warranty applies to IPRO MH PRO S pumps?
IPRO MH PRO S pumps are covered by a 36-month (3-year) manufacturer's warranty, while warranty and post-warranty service is provided by Dambat. For maintenance or repairs, it is advisable to contact the service department directly.