JET 1500 PRO – hydrofor pump
The JET 1500 PRO pump by IPRO is a single-stage, self-priming centrifugal pump designed for pumping clean technical-grade cold raw water from private water sources and for boosting pressure in systems drawing and pressurizing this water, in installations with increased water demand. As a device from the IPRO range, dedicated to professionals and applications requiring enhanced reliability, it stands out with a Venturi tube system providing high suction capacity and a sturdy cast-iron housing ensuring structural durability under intensive operation.
Who is it for
- Contractors installing systems with increased water demand – the higher capacity of the JET 1500 PRO enables simultaneous water intake at several points in the installation.
- Industrial plants and workshops – the sturdy cast-iron construction allows the pump to operate continuously in processes requiring stable pressure boosting.
- Farms and horticultural businesses – this model supports more extensive irrigation systems than the smaller units in this series.
- Water-system installers – compatibility with a diaphragm tank or hydrofor controller facilitates the selection of a complete set.
Applications
The JET 1500 PRO hydrofor pump is used in systems for drawing and pressurizing raw water with increased water demand, supplied from private water sources—dug or deep wells. The Venturi tube system enables water suction from depths of up to 9 metres, making it suitable when the water table varies throughout the season. The pump is not a water-treatment device; when using it for other purposes, we recommend ensuring appropriate water preparation.
In agricultural and industrial applications, the pump supports more extensive irrigation systems and installations requiring continuous, stable operation, while in single-family homes it is suitable when water is used simultaneously at several points in the installation. The JET 1500 PRO 230V hydrofor pump works with a diaphragm tank and hydrofor controllers, making it possible to build a complete set tailored to a larger installation.
Features
The JET 1500 PRO features a cast-iron housing and pump body, ensuring sturdiness and resistance to mechanical damage under intensive operating conditions. The shaft, rotor, impeller, and intermediate wall are made of AISI 304 stainless steel, protecting the hydraulic components against corrosion, while the PPO polymer diffuser reduces the weight of this part of the system.
The motor has built-in thermal protection in the winding, protecting the pump from overheating during prolonged continuous operation typical of systems with higher water demand. Quiet operation and IPX4 protection allow use in typical utility and technical rooms.
- Pump housing and body: gray cast iron
- Shaft and rotor: AISI 304 stainless steel
- Impeller: AISI 304 stainless steel
- Intermediate wall: AISI 304 stainless steel
- Diffuser/guide vane: PPO polymer
- Mechanical seal: ceramic / graphite / NBR
- Suction capacity: up to 9 m (Venturi tube)
- Quiet operation
- Thermal protection built into the motor winding
- Insulation class: F
- Protection rating: IPX4
- Max. liquid temperature: 60°C
- Max. operating pressure: 1 MPa
- Connection: 1½×1½"
IPRO – 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions
How does the Venturi tube system in the JET 1500 PRO pump work?
The Venturi tube increases the pump's suction capacity, allowing it to draw water from depths of up to 9 meters without the need to prime the suction system before startup. This solution is particularly useful when the water level in the well varies.
Can the JET 1500 PRO work with a hydrofor control unit or a diaphragm pressure tank?
Yes, the pump can work with both a diaphragm pressure tank and hydrofor control units, allowing you to configure a complete set suited to a larger installation.
Does the JET 1500 PRO pump have dry-run protection?
No, the JET 1500 PRO does not have built-in dry-run protection. In installations at risk of falling water levels, it is advisable to use an additional float switch or dry-run sensor.
Which installations are best suited for the JET 1500 PRO?
The JET 1500 PRO is suitable for raw-water intake and pressure-boosting systems with increased water demand—homes with several simultaneous water outlets, farms, and industrial applications requiring continuous, stable operation.
How does the JET 1500 PRO differ from the JET 1100 PRO?
The JET 1500 PRO offers higher performance than the JET 1100 PRO, making it suitable for greater water demand. The JET 1100 PRO is a smaller unit, sufficient for basic water intake from a private water source.
What warranty applies to the IPRO JET 1500 PRO pump?
The IPRO JET 1500 PRO pump is covered by a 36-month (3-year) manufacturer's warranty, while warranty and post-warranty service is provided by Dambat. For maintenance or repairs, it is best to contact the service department directly.
