DRENO BOX 100 L (G1¼") - internal pumping station tank

Brief description

Pumping station tank DRENO BOX 100L G1¼″ is a compact, internal sewage and rainwater pumping station, intended for installation on the floor or in the ground, wherever gravity drainage of sewage to the sewage system is not possible. Thanks to the capacity of 100 l, factory piping G1¼″ and a tight cover with a gasket, it is a ready base for building a reliable pumping station using pumps DRENO. Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.

For whom

• Owners of single-family houses with basements - trouble-free drainage of sewage from laundry rooms, bathrooms and utility rooms located below the sewage level.
• Administrators of public buildings - reliable drainage of flat surfaces, workshops, social facilities or warehouses without the need for deep excavations.
• Investors constructing underground garages and driveways - effective drainage of rainwater from linear drainage and floors to the sewage system.
• Craft workshops and small companies - safe disposal of gray sewage from kitchens, sanitary facilities and social rooms when there is no gravity fall.
• Hydraulic installers - a universal base for the construction of compact internal pumping stations with the option of selecting the appropriate pump DRENO.

Application

• Drainage of flat surfaces, floors and garages, including pumping rainwater and gray sewage to higher sewage systems.
• Pumping domestic sewage from bathrooms and kitchens (except toilets using Compatta pumps) using pumps with a Vortex impeller with a free passage of 30 mm, such as COMPATTA.
• Discharge of sewage from floor drainage and floor drains using pumps with two-channel impellers with a free passage of 8x10 mm, e.g. BIC.
• Discharge of all sewage from the apartment, including the toilet, using a GRIX grinder pump - an ideal solution for full sanitary services.
• Used as an under-floor tank in garages, driveways and in rainwater installations in residential and commercial buildings.

Compact pumping station DRENO BOX 100L G1¼″ is ideal as an internal sewage pumping station when it is not possible to discharge sewage to the sewage system by gravity.

Features, description and technical data

Pumping station tank DRENO BOX 100L G1¼″ is a compact internal pumping station with a capacity of 100 liters, designed to work with submersible pumps of the brand DRENO. The design is based on a durable polyethylene casing, equipped with a large cover with a gasket, closed with screws, which prevents odors from escaping into the room. The tank is delivered with complete discharge piping with a diameter of G1¼", which enables quick installation of the recommended pumps and ensures failure-free operation of the system.

DRENO BOX 100L is used wherever the main sewage system is located above the level of the room drainage and there is no possibility of gravity drainage. Depending on the selected pump, the tank can serve rooms and premises in basements, workshops, public buildings and sanitary utensils. By using pumps with a Vortex impeller with a free passage of 30 mm (COMATTA series), it is possible to handle sewage from bathrooms and kitchens, but it is not recommended to discharge sewage from toilets using these pumps. Pumps with two-channel impellers with a free passage of 8x10 mm (BIC series) are dedicated to floor drainage. A unique feature of this tank is the possibility of using a pump with a grinder (GRIX series), which allows the removal of all sewage from the apartment, including the toilet.

The tank is intended for use inside buildings as a free-standing or under-floor tank, so it does not require anchoring to the ground. It can be installed on the floor or on the ground, and its compact dimensions facilitate installation in limited spaces, such as basements or technical rooms. The large cover with a seal allows you to walk on it (it is not designed for vehicular traffic), which allows you to integrate the tank with the floor in the garage or utility room.

In the standard set DRENO BOX 100L with piping G1¼″ includes: a tank, a set of seals for all cable and pipe passages, a quick connector for the discharge riser and rubber cable glands, which significantly simplifies installation and service. The G1¼″ discharge pipe is made of a material resistant to working conditions with water and sewage, and the stainless steel screws used ensure durability and corrosion resistance in a humid environment. The maximum temperature of the pumped liquid is +40°C, according to the documentation DRENO BOX.

To ensure optimal operation of the pumping station, the manufacturer recommends the use of single-phase submersible pumps DRENO equipped with a float switch. To the tank DRENO BOX 100L with G1¼″ piping, the following models of single-phase pumps are especially recommended:

• COMPATTA 1.5 M/G (0.37 kW, 230 V) – submersible pump with float switch, with a Vortex impeller with a free passage of 30 mm, dedicated to domestic and gray sewage from bathrooms and kitchens (except toilets).
• COMPATTA 1.5 M/G (0.37 kW, 230 V) z float switch vertical – version for use in places with limited working space inside the tank.
• BIC 32-2/037 M/G (0.37 kW, 230 V) – submersible pump with float switch, equipped with a two-channel impeller with a free passage of 8 × 10 mm, intended for floor drainage and drainage.
• BIC 32-2/037 M/G (0.37 kW, 230 V) with float switch vertical – version for limited installation space.
• GRIX 32-2/090 M/G (0.9 kW, 230 V) – submersible pump with a shredder, enabling the removal of all sewage from the apartment, including the toilet, thanks to a cutting system made of hardened steel.

The tank is factory-prepared for easy installation of pumps DRENO – the user receives a complete set of piping for self-assembly of the pump with a float switch. This solution shortens installation time and minimizes the risk of assembly errors on the contractor's part.

The most important design advantages

• Compact design - capacity of 100 liters and small dimensions facilitate installation in small technical rooms and basements.
• Seals for all cable and pipe passages - ensure tightness of the installation and protection against the release of odors.
• Large cover with a seal, closed with screws - allows you to walk on the cover (without circular movement) and guarantees the tightness of the tank.
• Quick connector for the pump on the discharge line - enables quick assembly and disassembly of the pump for service without the need to dismantle the entire installation.
• Small dimensions and no need for anchoring - installation possible on the floor or on the ground, without additional construction work.
• Possibility of using a pump with a grinder - a unique feature that allows the removal of all sewage from the apartment, including the toilet.

Technical data:

• Tank capacity: 100 l.
• Pressure riser: G1¼″.
• Cover with a seal, closed with screws - protection against the release of odors.
• Maximum liquid temperature: +40°C.
• Installation: on the floor or on the ground, as a free-standing or under-floor tank.
• Anchoring: does not require anchoring to the ground.

Materials

• Housing: polyethylene - resistant to corrosion and typical sewage media and rainwater.
• Cover: polyethylene with gasket.
• Discharge riser and connectors: plastic resistant to sewage and rainwater.
• Screws and mounting elements: stainless steel.

FAQ

Frequently asked questions (FAQ) – DRENO BOX 100L G1¼″