Multistage vertical pump IPRO CVI 3-10T
Multistage vertical pump IPRO CVI 3-10 T with a power of 0.75 kW is a centrifugal device designed to work in pressure boosting systems and water supply systems. The in-line design and stainless steel elements facilitate failure-free operation in treatment stations, refrigeration systems and industrial technological lines.
For whom (B2B)
Application
Vertical centrifugal pump IPRO CVI 3-10 T is used to distribute drinking and utility water, feeding waterworks and treatment plants. The device is useful in industry, operating high-pressure circulation systems, air conditioning, refrigeration and fire protection circuits. Agriculture successfully uses this model to power professional irrigation installations.
The equipment pumps only clean and chemically non-aggressive liquids. The hydraulic system must operate without abrasive substances in the pumped medium, because mechanical impurities will destroy the stuffing box and steel rotors. The pump does not tolerate explosive, viscous or highly corrosive liquids.
Features, description and technical data
The pump's design is based on an in-line system of connectors, which simplifies connecting the device to existing pipeline lines. The engine housing, impellers, diffusers and shaft are made of durable stainless steel, which protects the mechanism against corrosion. The suction and discharge elements are based on a stable cast iron ASTM25B.
A three-phase, two-pole asynchronous motor with a squirrel-cage rotor is responsible for precise pressing, allowing for 100 starts per hour of operation. The unit uses a pack mechanical seal (silicon carbide/tungsten carbide/EPDM), tolerant to operating pressure up to 25 bar. The pump has very low noise emissions of 53 dB(A).
- Lifting: 60.0 m,
- Capacity: 74.5 l/min,
- Power: 0.75 kW,
- Power supply: 3~400V,
- Frequency: 50 Hz,
- Power consumption: A,
- Motor speed: 2850 rpm. ,
- Maximum number of starts per 1 hour: 100,
- Insulation class: F,
- Operating mode: continuous,
- Degree of protection: IP55,
- Connection: DN25 - DN32,
- Inlet/outlet direction: Horizontal,
- Working position: Vertical,
- Minimum liquid temperature: 10°C,
- Maximum liquid temperature: 90°C,
- Maximum ambient temperature: 40°C,
- pH range: 3-9,
- Dimensions length/height/width: 25/60.8/21 cm,
- Weight: 25.0 kg,
ADDITIONAL INFORMATION:
- Noise level LpA: 53 dB(A),
- Maximum pressure in the installation: 25 bar,
- Maximum input pressure: 10 bar.
MATERIALS:
- Motor housing: AISI 304 stainless steel,
- Suction/discharge body: cast iron ASTM25B,
- Pump shaft: AISI 420 stainless steel,
- Impeller: AISI 304 stainless steel,
- Diffusers: AISI 304 stainless steel,
- Package mechanical seal for basic versions from +10°C to 90°C: Silicon carbide/Tungsten carbide/EPDM.
FAQ – IPRO CVI 3-10 T vertical pump (B2B)
Where is this product sold?
Where is this product sold?
+
IPRO CVI 3-10 T can be found in industry retail outlets and wholesalers cooperating with the brand IPRO.
How is warranty and service performed?
How is warranty and service performed?
+
The only authorized one service is run by Dambat, which guarantees professional technical diagnostics and access to original parts.
What medium can be pumped with this model?
What medium can be pumped with this model?
+
The equipment pumps clean, chemically non-aggressive liquids. The system must be absolutely free of abrasive substances in the pumped medium.
Does the pump generate a high noise level?
Does the pump generate a high noise level?
+
No, the structure of the device has been specially optimized for sound reduction, thanks to which the emitted noise is only 53 dB(A).
How often can this unit be turned on?
How often can this unit be turned on?
+
The three-phase pump motor has been designed for intensive use and allows for a maximum of 100 starting cycles per hour of operation.
Dambat is a trusted Polish manufacturer of pumps and hydrotechnical equipment with quality certificates.
