DN15 circulation pump connection set - 1/2" male thread × M 1" fittings with ball and check valves
The DN15 circulation pump connection set consists of two brass fittings for IBO circulation pumps with a 1/2" male thread × M 1" connection. One fitting has an integrated ball valve, and the other has a check valve. Both replace standard union fittings, allowing the shut-off and check valves to fit within the pump's installation length, without additional threaded connections on the pipeline.
Who it's for
-
Heating system and H.W.U. installers – the set replaces half-unions and accommodates a shut-off and check valve within the pump's installation length, without adding connections to the pipeline.
-
Homeowners with an IBO circulation pump - the ball valve lets you shut off the circuit and remove the pump without draining the system.
-
Service companies - the ball valve and check valve simplify pump removal for inspection and protect the system from backflow.
Applications
The set is designed for circulation pumps with a 1/2" female thread connection. The ball valve allows you to shut off flow in the system and remove the pump for servicing without draining the entire system, while the check valve prevents backflow.
Install the fitting with the ball valve on the pump inlet (suction) side and the fitting with the check valve on the outlet (discharge) side. The ball valve is operated with a screwdriver, and the pump-side seal is an O-ring.
DN15 connection set features - description and technical data
The fitting bodies are made of brass, and the pump-side seal is an O-ring. The M 1" connection has a flat face for a union nut. During installation, observe the tightening torque recommended for brass threaded connections.
- Set contents: 2 fittings (ball valve + check valve)
- Connection on the pump side: 1/2" male thread
- Connection on the system side: M 1"
- Body material: CW617N brass
- Max. operating temperature: 95 °C
- Max. working pressure: 10 bar
IBO - 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat - a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) - DN15 connection set for a circulation pump
What is the DN15 connection set for a circulation pump used for?
The set replaces the standard pump unions on a circulation pump with two brass fittings - one with a ball valve and one with a check valve. It lets you shut off the flow, remove the pump without draining the system, and protects the system against backflow.
Which pumps is the set compatible with?
The set is compatible with circulation pumps with a 1/2" female threaded connection.
How do I install the set on the pump?
Install the fitting with the ball valve on the pump's inlet (suction) side, and the fitting with the check valve on the outlet (discharge) side. When tightening, observe the recommended torque for brass threaded connections.
Can the pump be replaced without draining the system?
Yes. The ball valve lets you shut off the flow in the system, so the pump can be removed for servicing without draining the entire system.
Where can I buy the DN15 connection set?
Dambat does not sell directly. IBO accessories are available from retail partners, plumbing wholesalers, and authorized online distributors.
What is the warranty on the DN15 connection set?
IBO - 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.