Description
Well point filter 5/4" x 1150 mm
The IBO well point filter is used to draw water from ring wells and to deepen them. The perforated pipe lets water into the system and traps sand, protecting the pump from its harmful effects. It can also be a cheaper alternative to a deep well where ground conditions allow.
Who it's for
- Owners of ring wells – the filter makes it possible to deepen an existing well and reach water in a deeper layer.
- Property owners without mains water – a simpler and cheaper alternative to a deep well, where ground conditions allow.
- Users of surface and hand pumps – the filter protects the pump from sand drawn from the bottom of the well.
- Well diggers and installation teams – a ready-to-install component for anchoring in the ground, with a threaded connection to the system.
Applications
A well point filter is used in ring wells to deepen them and filter the water drawn from them. It can also be a cheaper alternative to a deep well where ground conditions allow. The point at the base makes it easier to insert the filter into the ground, while the perforated pipe lets water through and traps sand.
The filter works with hand, surface and pressure-tank pumps, both single-stage and multistage, which connect to the threaded end. The filter is not driven into the ground – it is freely anchored. The IBO 5/4" well point filter protects the pump from sand and allows you to draw water from a ring well.
Features of the well point filter
The filter has a three-piece construction. At the base is a cast-iron shaft in the form of a point, which guides the filter deeper into the ground. The middle section is a perforated galvanized steel pipe, through which water flows into the system while sand is trapped. The upper end is threaded, allowing a pipe or pump to be connected.
The filter is not designed to be driven into the ground – it should be freely anchored in the ground, which protects the pipe and point from damage. This also makes it suitable for places where a conventional well point cannot be driven in. The galvanized steel construction is resistant to the conditions inside the well.
- Type: well point filter (for ring wells)
- Construction: three-piece – point, perforated pipe, threaded end
- Pipe material: galvanized steel
- Point: cast iron
- Filter diameter: 50 mm
- Connection: 1¼" (5/4")
- Overall length: 130 cm (including 20 cm tip)
- Installation: anchoring in the ground (not for hammering in)
IBO – 24-month (2-year) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.
Dambat – a trusted manufacturer of pumps and water engineering equipment, certified for quality.
Frequently asked questions (FAQ) – IBO well point filter
What is an IBO well point filter used for?
An IBO well point filter is used to draw water from ring wells and deepen them. The perforated pipe lets water into the system and retains sand, protecting the pump from damage. It is also sometimes used as a less expensive alternative to a deep well.
Can a well point filter be hammered into the ground?
No. This filter must not be hammered into the ground – it should be anchored freely in the soil. Hammering it in could damage the perforated pipe and tip, so the filter must be inserted into prepared ground without striking it.
What pumps are compatible with a well point filter?
The filter can be connected to hand pumps, surface pumps, and pressure tank pumps, both single-stage and multistage. The pump is connected to the filter’s 1¼" threaded end. The right pump depends on the well depth and the required flow rate.
How does a well point filter differ from a deep well?
A well point filter is a simpler and less expensive solution than a deep well. It works well in ring wells and where water is available in shallower layers. A deep well reaches greater depths and requires drilling and a submersible pump. The choice depends on water availability and soil type.
How do I install a well point filter?
The filter is anchored freely in the ground, without hammering it in, and a pipe and pump are connected to its threaded end. The tip at the base makes it easier to insert the filter into the ground. Installation is best left to someone experienced in well construction.
Where can I buy an IBO well point filter?
As a manufacturer, we do not sell directly to customers. IBO well point filters are available from our sales partners, plumbing wholesalers, and authorized online distributors. Choose a model based on the type of well and pump.
What is the warranty on an IBO well point filter?
IBO – 24-month (2-year) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat. For advice on choosing a product, please contact an authorized distributor.
- Connection [DN/inches]: 1¼
Well point filter 5/4" x 1150 mm
The IBO well point filter is used to draw water from ring wells and to deepen them. The perforated pipe lets water into the system and traps sand, protecting the pump from its harmful effects. It can also be a cheaper alternative to a deep well where ground conditions allow.
Who it's for
- Owners of ring wells – the filter makes it possible to deepen an existing well and reach water in a deeper layer.
- Property owners without mains water – a simpler and cheaper alternative to a deep well, where ground conditions allow.
- Users of surface and hand pumps – the filter protects the pump from sand drawn from the bottom of the well.
- Well diggers and installation teams – a ready-to-install component for anchoring in the ground, with a threaded connection to the system.
Applications
A well point filter is used in ring wells to deepen them and filter the water drawn from them. It can also be a cheaper alternative to a deep well where ground conditions allow. The point at the base makes it easier to insert the filter into the ground, while the perforated pipe lets water through and traps sand.
The filter works with hand, surface and pressure-tank pumps, both single-stage and multistage, which connect to the threaded end. The filter is not driven into the ground – it is freely anchored. The IBO 5/4" well point filter protects the pump from sand and allows you to draw water from a ring well.
Features of the well point filter
The filter has a three-piece construction. At the base is a cast-iron shaft in the form of a point, which guides the filter deeper into the ground. The middle section is a perforated galvanized steel pipe, through which water flows into the system while sand is trapped. The upper end is threaded, allowing a pipe or pump to be connected.
The filter is not designed to be driven into the ground – it should be freely anchored in the ground, which protects the pipe and point from damage. This also makes it suitable for places where a conventional well point cannot be driven in. The galvanized steel construction is resistant to the conditions inside the well.
- Type: well point filter (for ring wells)
- Construction: three-piece – point, perforated pipe, threaded end
- Pipe material: galvanized steel
- Point: cast iron
- Filter diameter: 50 mm
- Connection: 1¼" (5/4")
- Overall length: 130 cm (including 20 cm tip)
- Installation: anchoring in the ground (not for hammering in)
IBO – 24-month (2-year) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.
Dambat – a trusted manufacturer of pumps and water engineering equipment, certified for quality.
Frequently asked questions (FAQ) – IBO well point filter
What is an IBO well point filter used for?
An IBO well point filter is used to draw water from ring wells and deepen them. The perforated pipe lets water into the system and retains sand, protecting the pump from damage. It is also sometimes used as a less expensive alternative to a deep well.
Can a well point filter be hammered into the ground?
No. This filter must not be hammered into the ground – it should be anchored freely in the soil. Hammering it in could damage the perforated pipe and tip, so the filter must be inserted into prepared ground without striking it.
What pumps are compatible with a well point filter?
The filter can be connected to hand pumps, surface pumps, and pressure tank pumps, both single-stage and multistage. The pump is connected to the filter’s 1¼" threaded end. The right pump depends on the well depth and the required flow rate.
How does a well point filter differ from a deep well?
A well point filter is a simpler and less expensive solution than a deep well. It works well in ring wells and where water is available in shallower layers. A deep well reaches greater depths and requires drilling and a submersible pump. The choice depends on water availability and soil type.
How do I install a well point filter?
The filter is anchored freely in the ground, without hammering it in, and a pipe and pump are connected to its threaded end. The tip at the base makes it easier to insert the filter into the ground. Installation is best left to someone experienced in well construction.
Where can I buy an IBO well point filter?
As a manufacturer, we do not sell directly to customers. IBO well point filters are available from our sales partners, plumbing wholesalers, and authorized online distributors. Choose a model based on the type of well and pump.
What is the warranty on an IBO well point filter?
IBO – 24-month (2-year) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat. For advice on choosing a product, please contact an authorized distributor.

