SKYLINE 2 - compact pump with a frequency converter for pressure boosting
SKYLINE 2 is a compact, quiet pump with an inverter for everyday water supply at home. It draws it from its own well or raises too low pressure from the water supply network, and thanks to intelligent control it maintains a constant, comfortable stream on each tap. The 750 W motor provides a lifting height of up to 55 m and an efficiency of up to 93 l/min with a very low noise level.
For whom
- Single-family houses - equal water pressure in the bathroom, kitchen and garden without fluctuations when the consumption changes.
- Residents of areas with a weak network - reliable increase of too low water pressure.
- Allotment gardeners and gardeners – convenient Power supply watering with water from a well or reservoir.
- People who value silence - the noise level of 50 dB allows you to place the pump close to the living area.
- Installers – quick two-button configuration and clear selection parameters.
Application
SKYLINE 2 is a well-balanced pump for a typical home water installation. It draws raw water from a home well or increases the pressure from the water supply network, ensuring stable consumption even when water flows from several points at once. This is a convenient solution for modernizing the water installation at home when the old water pump does not maintain the same pressure.
The pump can also handle garden irrigation and watering with rainwater collected in the tank. The SKYLINE 2 230 V inverter pump works with typical installations found in Polish single-family houses.
SKYLINE 2 features
The heart of SKYLINE 2 is an energy-saving permanent magnet motor controlled by an inverter. Instead of turning on and off like a classic hydrophore, the pump smoothly adjusts the speed to the current consumption - the pressure remains equal, the water does not pulsate, and the power consumption is lower. Soft start protects the installation against water hammer and extends the life of the device.
Despite the real parameters (55 m lifting, 93 l/min), the pump operates extremely quietly - at the level of 50 dB - so its presence in the house is practically unnoticeable. The working pressure is set using two buttons in the range of 1.5–5.5 bar, and the pump maintains it independently.
Safety is ensured by a set of protections: protection against dry running (without additional probes and sensors in the well), overload, too high and low pressure, as well as against freezing and too high temperature. The compact housing facilitates installation even in tight technical rooms.
- Max Lift: 55 m
- Max capacity: 93 l/min
- Suction capacity: 8 m
- Pressure setting range: 1.5–5.5 bar
- Power: 750 W (0.75 kW)
- Engine speed: 4000 rpm
- Power supply: 1×230V (165-240V), 50/60Hz
- Drive: permanent magnet motor
- Noise Level: 50 dB
- Connections: 1" × 1"
- Degree of protection: IPX4
- Working mode: continuous
- Max. liquid temperature: 75°C
- Max. ambient temperature: 50°C
IBO – 24 months (2 years) manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – what is the SKYLINE 2 pump used for?
What is the SKYLINE 2 pump used for?
SKYLINE 2 supplies raw water from your own well to your home installation and raises too low pressure from the water supply network. Thanks to the inverter, it maintains constant pressure on all intake valves, and the efficiency of up to 93 l/min easily covers the needs of a single-family house.
Why does SKYLINE 2 consume less electricity than a regular water pump?
The classic hydrophore starts at full power every now and then, and SKYLINE 2 smoothly regulates the speed and works exactly as needed to maintain the pressure. The permanent magnet motor additionally increases efficiency, which translates into lower bills.
Is SKYLINE 2 suitable for watering the garden with rainwater from a tank?
Yes, the pump can draw water from a rainwater tank or well and power the irrigation system. When drawing from an open source, a mesh filter and a non-return valve should be installed at the suction end to prevent automatic emptying of the pipeline - the appropriate elements can be found in accessories for surface and hydrophore pumps.
How to set the pump operating pressure?
Configuration does not require a specialist visit - just use two buttons to set the operating pressure in the range from 1.5 to 5.5 bar. The pump will then maintain them automatically.
Where can you buy the SKYLINE 2 pump?
Dambat, as a manufacturer, does not conduct direct sales. The SKYLINE 2 pump is available from our trading partners, installation wholesalers and authorized online distributors.
What warranty is covered by the SKYLINE 2 pump?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
