Description
SK-15—automatic pump controller with cable
The IBO SK-15 is an electronic automatic pump controller that independently controls pump operation based on water consumption. When the pressure in the installation drops and flow begins, the device starts the pump and stops it when water consumption ends. It also protects the pump against dry running. The ready-made wiring makes installation quick, while the built-in pressure gauge and RESET button simplify everyday operation.
Who is it for?
- Installers and plumbers—ready-made wiring shortens connection time, while the built-in check valve simplifies system construction.
- Homeowners with their own water source—the automatic controller maintains pressure in the installation and automatically stops the pump when water runs out.
- Users of surface-mounted and submersible pumps—one device supports both types of single-phase pumps.
- Allotment gardeners and households—automates pump operation during water consumption, garden watering, and sprinkler supply.
Applications
The SK-15 is suitable for domestic and garden water installations supplied by a single-phase pump, whether surface-mounted or submersible. It responds to actual water consumption, so water is available immediately after opening a tap or turning on sprinklers. Adjusting the start-up pressure makes it possible to adapt the device's operation to the height to which the pump must deliver water.
The device is designed for clean water free of mechanical impurities. It is installed on the pump's discharge side in a vertical position. In a typical domestic single-phase installation, the SK-15 230 V automatic pump controller detects water consumption based on pressure and flow, so it does not start the pump unnecessarily in response to minor leaks.
Features of the SK-15 automatic pump controller
The SK-15 determines whether the pump is operating based on the pressure in the installation and the water flow in the pipe. This combination makes it possible to distinguish actual water consumption from a minor leak, preventing the pump from starting in response to small leaks. The factory-set start-up pressure is 1.5 bar, and the difference between the start-up and shut-off pressures should be at least 1 bar for stable operation.
The SK-15 has a built-in check valve that prevents water from flowing back into the pump, as well as a pressure gauge showing the current pressure in the installation. LEDs indicate the pump status—power, operation, and any potential fault. When a lack of water is detected, the device stops the pump, which must then be restarted manually by pressing the RESET button. The SK-15 is compatible with single-phase pumps drawing up to 10 A. It is installed on the pump's discharge side, between the pump and the first water outlet.
- Brand: IBO
- Type: automatic pressure controller for single-phase pumps
- Power supply: 230 V, 50 Hz
- Maximum power of supported pump: 1.1 kW
- Maximum current: 10 A
- Starting pressure: 1.5 bar
- Maximum system pressure: 10 bar
- Protection rating: IP54
- Protection: dry-run protection
- Equipment: built-in check valve, pressure gauge, RESET button, indicator lights
- Maximum water temperature: 40°C
- Connections: 1" / 1"
IBO – 24 months (2 years) manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and water technology equipment with quality certifications.
Frequently asked questions (FAQ) – SK-15 automatic controller
What is the SK-15 automatic controller used for?
The SK-15 is an automatic pressure controller that independently controls the pump according to water consumption. The pump starts when someone opens a tap and stops when the water is turned off. The device maintains pressure in the system and protects the pump against dry running.
What pumps is the SK-15 compatible with?
The automatic controller is designed for single-phase surface and submersible pumps with a power rating of up to 1.1 kW and current consumption of up to 10 A, supplied with 230 V. It should be used with clean water free of mechanical impurities, as contaminants may cause the device to malfunction.
Does the SK-15 protect the pump against dry running?
Yes. When there is no water in the system, the automatic controller stops the pump, protecting it from overheating and damage. The FAILURE indicator light signals a lack of water, and the pump must be restarted manually using the RESET button once the water supply has been restored.
How should I set the starting pressure in the SK-15?
The starting pressure is factory-set to 1.5 bar and should be matched to the pump's capabilities. The pump must generate pressure at least 1 bar higher than the starting-pressure threshold for the device to operate correctly. The higher the starting pressure, the higher the pump can deliver water.
What is the difference between the SK-15 and the PC-16 model?
After a water shortage, the SK-15 requires manual activation using the RESET button, while the PC-16 has an automatic restart function that independently attempts to resume pump operation. You can find both models in the controllers category.
Where can I buy the SK-15 automatic controller?
As the manufacturer, we do not sell directly. The IBO SK-15 automatic controller can be purchased from our trading partners, installation wholesalers, and authorized online distributors.
What is the warranty on the SK-15 automatic controller?
IBO – 24 months (2 years) manufacturer's warranty.
- Type: ,
- Number of pumps supported: 1,
- Maximum power: 1.1 kW,
- Power supply: 1~230 V,
- Frequency: 50 Hz,
- Maximum supported current: 10.0 A
- Protection rating: IP65
- Maximum liquid temperature: 40°C
- Dimensions: mm,
- Weight: 1.0 kg.
SK-15—automatic pump controller with cable
The IBO SK-15 is an electronic automatic pump controller that independently controls pump operation based on water consumption. When the pressure in the installation drops and flow begins, the device starts the pump and stops it when water consumption ends. It also protects the pump against dry running. The ready-made wiring makes installation quick, while the built-in pressure gauge and RESET button simplify everyday operation.
Who is it for?
- Installers and plumbers—ready-made wiring shortens connection time, while the built-in check valve simplifies system construction.
- Homeowners with their own water source—the automatic controller maintains pressure in the installation and automatically stops the pump when water runs out.
- Users of surface-mounted and submersible pumps—one device supports both types of single-phase pumps.
- Allotment gardeners and households—automates pump operation during water consumption, garden watering, and sprinkler supply.
Applications
The SK-15 is suitable for domestic and garden water installations supplied by a single-phase pump, whether surface-mounted or submersible. It responds to actual water consumption, so water is available immediately after opening a tap or turning on sprinklers. Adjusting the start-up pressure makes it possible to adapt the device's operation to the height to which the pump must deliver water.
The device is designed for clean water free of mechanical impurities. It is installed on the pump's discharge side in a vertical position. In a typical domestic single-phase installation, the SK-15 230 V automatic pump controller detects water consumption based on pressure and flow, so it does not start the pump unnecessarily in response to minor leaks.
Features of the SK-15 automatic pump controller
The SK-15 determines whether the pump is operating based on the pressure in the installation and the water flow in the pipe. This combination makes it possible to distinguish actual water consumption from a minor leak, preventing the pump from starting in response to small leaks. The factory-set start-up pressure is 1.5 bar, and the difference between the start-up and shut-off pressures should be at least 1 bar for stable operation.
The SK-15 has a built-in check valve that prevents water from flowing back into the pump, as well as a pressure gauge showing the current pressure in the installation. LEDs indicate the pump status—power, operation, and any potential fault. When a lack of water is detected, the device stops the pump, which must then be restarted manually by pressing the RESET button. The SK-15 is compatible with single-phase pumps drawing up to 10 A. It is installed on the pump's discharge side, between the pump and the first water outlet.
- Brand: IBO
- Type: automatic pressure controller for single-phase pumps
- Power supply: 230 V, 50 Hz
- Maximum power of supported pump: 1.1 kW
- Maximum current: 10 A
- Starting pressure: 1.5 bar
- Maximum system pressure: 10 bar
- Protection rating: IP54
- Protection: dry-run protection
- Equipment: built-in check valve, pressure gauge, RESET button, indicator lights
- Maximum water temperature: 40°C
- Connections: 1" / 1"
IBO – 24 months (2 years) manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and water technology equipment with quality certifications.
Frequently asked questions (FAQ) – SK-15 automatic controller
What is the SK-15 automatic controller used for?
The SK-15 is an automatic pressure controller that independently controls the pump according to water consumption. The pump starts when someone opens a tap and stops when the water is turned off. The device maintains pressure in the system and protects the pump against dry running.
What pumps is the SK-15 compatible with?
The automatic controller is designed for single-phase surface and submersible pumps with a power rating of up to 1.1 kW and current consumption of up to 10 A, supplied with 230 V. It should be used with clean water free of mechanical impurities, as contaminants may cause the device to malfunction.
Does the SK-15 protect the pump against dry running?
Yes. When there is no water in the system, the automatic controller stops the pump, protecting it from overheating and damage. The FAILURE indicator light signals a lack of water, and the pump must be restarted manually using the RESET button once the water supply has been restored.
How should I set the starting pressure in the SK-15?
The starting pressure is factory-set to 1.5 bar and should be matched to the pump's capabilities. The pump must generate pressure at least 1 bar higher than the starting-pressure threshold for the device to operate correctly. The higher the starting pressure, the higher the pump can deliver water.
What is the difference between the SK-15 and the PC-16 model?
After a water shortage, the SK-15 requires manual activation using the RESET button, while the PC-16 has an automatic restart function that independently attempts to resume pump operation. You can find both models in the controllers category.
Where can I buy the SK-15 automatic controller?
As the manufacturer, we do not sell directly. The IBO SK-15 automatic controller can be purchased from our trading partners, installation wholesalers, and authorized online distributors.
What is the warranty on the SK-15 automatic controller?
IBO – 24 months (2 years) manufacturer's warranty.