Description
RAINER 1200 AUTO STORM – submersible pump with an automatic control unit
The RAINER 1200 AUTO STORM submersible pump from IBO is a device designed with for automated operation—the electronic control unit replaces the traditional float switch, switching the pump on when the installation pressure drops and switching it off when the pressure reaches the set value again. An additional suction hose with a float in the form of a ball draws water from the surface of the tank, reducing the risk of sucking in contaminants from the bottom. This solution is particularly useful when working with tanks for rainwater.
Who is it for
- Rainwater harvesting system users – the suction hose with a float draws the cleanest water from the surface of the storage tank.
- Homeowners and allotment holders – the automatic controller maintains constant pressure in the installation without the need to install an additional float switch.
- Installation and service companies – built-in leak and dry-run protection reduces the number of service interventions.
- Farms and horticultural businesses – the automatic controller correctly recognizes prolonged, low water consumption during drip irrigation and does not treat it as a leak.
Applications
The RAINER 1200 AUTO STORM submersible pump handles water from private water intakes and water containing chlorine—clean or slightly contaminated, without sand or other abrasive substances abrasive substances. The pump was designed to supply water to households, irrigation systems and rainwater harvesting systems. It also performs well when pumping water out of flooded rooms.
The device operates in a vertical position, at an immersion depth of up to 6 m, with a maximum a pumped liquid temperature of up to 35°C. The RAINER 1200 AUTO STORM submersible pump 230 V automatically maintains constant pressure in the installation, while the suction hose with a float ensures water intake from the surface of the tank, regardless of the sediment level at the bottom.
Features of the RAINER 1200 AUTO STORM pump
The RAINER 1200 AUTO STORM pump is equipped with an electronic control unit that replaces the traditional float switch. When the outlet valve is closed, the pump switches and switches to standby mode, while the pressure in the system is then maintained by the integrated a check valve. When the valve is opened, the pump switches on automatically. The dedicated connection the connection allows a suction hose with a ball-shaped float to be connected, so that water intake takes place from the surface of the tank.
The automatic control unit has built-in dry-run protection and protection against leak. If the pump switches on and off more than 7 times within 2 minutes, it switches into emergency mode – in this case, disconnect and reconnect the power supply to resume operation. With a small, continuous water draw, for example during drip irrigation, the warning the leak warning is activated only after 60 minutes of such operation, so the pump does not stops unnecessarily. The cooling jacket allows the pump to operate without being fully submersion in water. The built-in vent valve automatically removes air from the system.
- Pump type: submersible pump with an automatic control unit and a suction hose with a float
- Power supply: 230 V (single-phase)
- Motor power: 1200 W
- Head (Hmax): 50 m
- Capacity (Qmax): 95 l/min
- Insulation class: B
- Protection rating: IPX8
- Operating mode: continuous
- Operating position: vertical
- Rotational speed: 2850 rpm
- Impeller passage: 1mm
- Max. liquid temperature: 35°C
- Max. immersion depth: 6 m
- Power cable length: 10 m
- Discharge connection: threaded, 1"
- Suction hose: with a ball-shaped float, drawing water from the surface of the tank
- Protections: against dry running, thermal protection against motor overload, against system leaks
- Materials: housing – AISI 304 stainless steel / plastic, shaft – AISI 304 stainless steel, impeller – PPO polymer, mechanical seal – SiC/graphite/NBR
IBO – 24 months (2 years) of the manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – RAINER 1200 AUTO STORM submersible pump
What is the suction hose with a float in the RAINER 1200 AUTO STORM pump used for?
The suction hose with a ball-shaped float draws water from the surface of the tank, reducing the risk of drawing in sediment and contaminants settled on the bottom. This solution is particularly useful when working with rainwater tanks.
What happens when a leak occurs in the system?
If there is a leak in the system, the pump will start switching on and off at short at intervals. If the frequency exceeds 7 activations within 2 minutes, the pump switches to emergency mode and requires the power supply to be disconnected and reconnected after the cause of the leak has been removed.
What is the difference between the RAINER 1200 AUTO STORM and RAINER 1200 AUTO?
Both pumps have identical hydraulic and electrical parameters and the same automatic control system. They differ in their additional equipment – the RAINER 1200 AUTO STORM has a suction hose with a ball-shaped float, which draws water from the surface of the tank rather than only directly from around the pump, like the basic version.
Which discharge hose should be used with the RAINER 1200 AUTO STORM pump?
For proper pump operation, a discharge hose with a minimum diameter of ¾" is recommended – too small a the diameter may cause the automatic system to malfunction and switch on by itself and switching the pump on and off. If you are unsure which one to choose, we encourage you to contact with the technical department.
Where can the RAINER 1200 AUTO STORM submersible pump be purchased?
Dambat does not sell directly. The RAINER 1200 AUTO STORM pump is available through sales partners, installation wholesalers, and authorized distributors online.
What warranty terms apply to the RAINER 1200 AUTO STORM pump?
IBO – 24 months (2 years) of the manufacturer's warranty. Warranty and post-warranty service provided by Dambat.
- Lift: 50.0 m,
- Capacity: 95.0 l/min.,
- Power: 1.2 kW,
- Power supply: 1~230 V,
- Current: 5.0 A,
- Frequency: 50 Hz,
- Motor speed: 2850 rpm,
- Insulation class: B,
- Operating mode: continuous,
- Protection rating: IPX8,
- Impeller type: ,
- Particle size: mm,
- Connection [DN/cale]: 1,
- Discharge direction: ,
- Built-in float switch/probe: ,
- Operating position: Vertical,
- Power cable length: 10.0 m,
- Length/height/width: 525/150/150 mm,
- Weight: 10.0 kg,
• Housing: AISI 304 stainless steel,
• Impeller: PPO polymer,
• Shaft and motor rotor: AISI 304 stainless steel,
• Mechanical seal: ceramic/carbon/NBR.
RAINER 1200 AUTO STORM – submersible pump with an automatic control unit
The RAINER 1200 AUTO STORM submersible pump from IBO is a device designed with for automated operation—the electronic control unit replaces the traditional float switch, switching the pump on when the installation pressure drops and switching it off when the pressure reaches the set value again. An additional suction hose with a float in the form of a ball draws water from the surface of the tank, reducing the risk of sucking in contaminants from the bottom. This solution is particularly useful when working with tanks for rainwater.
Who is it for
- Rainwater harvesting system users – the suction hose with a float draws the cleanest water from the surface of the storage tank.
- Homeowners and allotment holders – the automatic controller maintains constant pressure in the installation without the need to install an additional float switch.
- Installation and service companies – built-in leak and dry-run protection reduces the number of service interventions.
- Farms and horticultural businesses – the automatic controller correctly recognizes prolonged, low water consumption during drip irrigation and does not treat it as a leak.
Applications
The RAINER 1200 AUTO STORM submersible pump handles water from private water intakes and water containing chlorine—clean or slightly contaminated, without sand or other abrasive substances abrasive substances. The pump was designed to supply water to households, irrigation systems and rainwater harvesting systems. It also performs well when pumping water out of flooded rooms.
The device operates in a vertical position, at an immersion depth of up to 6 m, with a maximum a pumped liquid temperature of up to 35°C. The RAINER 1200 AUTO STORM submersible pump 230 V automatically maintains constant pressure in the installation, while the suction hose with a float ensures water intake from the surface of the tank, regardless of the sediment level at the bottom.
Features of the RAINER 1200 AUTO STORM pump
The RAINER 1200 AUTO STORM pump is equipped with an electronic control unit that replaces the traditional float switch. When the outlet valve is closed, the pump switches and switches to standby mode, while the pressure in the system is then maintained by the integrated a check valve. When the valve is opened, the pump switches on automatically. The dedicated connection the connection allows a suction hose with a ball-shaped float to be connected, so that water intake takes place from the surface of the tank.
The automatic control unit has built-in dry-run protection and protection against leak. If the pump switches on and off more than 7 times within 2 minutes, it switches into emergency mode – in this case, disconnect and reconnect the power supply to resume operation. With a small, continuous water draw, for example during drip irrigation, the warning the leak warning is activated only after 60 minutes of such operation, so the pump does not stops unnecessarily. The cooling jacket allows the pump to operate without being fully submersion in water. The built-in vent valve automatically removes air from the system.
- Pump type: submersible pump with an automatic control unit and a suction hose with a float
- Power supply: 230 V (single-phase)
- Motor power: 1200 W
- Head (Hmax): 50 m
- Capacity (Qmax): 95 l/min
- Insulation class: B
- Protection rating: IPX8
- Operating mode: continuous
- Operating position: vertical
- Rotational speed: 2850 rpm
- Impeller passage: 1mm
- Max. liquid temperature: 35°C
- Max. immersion depth: 6 m
- Power cable length: 10 m
- Discharge connection: threaded, 1"
- Suction hose: with a ball-shaped float, drawing water from the surface of the tank
- Protections: against dry running, thermal protection against motor overload, against system leaks
- Materials: housing – AISI 304 stainless steel / plastic, shaft – AISI 304 stainless steel, impeller – PPO polymer, mechanical seal – SiC/graphite/NBR
IBO – 24 months (2 years) of the manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – RAINER 1200 AUTO STORM submersible pump
What is the suction hose with a float in the RAINER 1200 AUTO STORM pump used for?
The suction hose with a ball-shaped float draws water from the surface of the tank, reducing the risk of drawing in sediment and contaminants settled on the bottom. This solution is particularly useful when working with rainwater tanks.
What happens when a leak occurs in the system?
If there is a leak in the system, the pump will start switching on and off at short at intervals. If the frequency exceeds 7 activations within 2 minutes, the pump switches to emergency mode and requires the power supply to be disconnected and reconnected after the cause of the leak has been removed.
What is the difference between the RAINER 1200 AUTO STORM and RAINER 1200 AUTO?
Both pumps have identical hydraulic and electrical parameters and the same automatic control system. They differ in their additional equipment – the RAINER 1200 AUTO STORM has a suction hose with a ball-shaped float, which draws water from the surface of the tank rather than only directly from around the pump, like the basic version.
Which discharge hose should be used with the RAINER 1200 AUTO STORM pump?
For proper pump operation, a discharge hose with a minimum diameter of ¾" is recommended – too small a the diameter may cause the automatic system to malfunction and switch on by itself and switching the pump on and off. If you are unsure which one to choose, we encourage you to contact with the technical department.
Where can the RAINER 1200 AUTO STORM submersible pump be purchased?
Dambat does not sell directly. The RAINER 1200 AUTO STORM pump is available through sales partners, installation wholesalers, and authorized distributors online.
What warranty terms apply to the RAINER 1200 AUTO STORM pump?
IBO – 24 months (2 years) of the manufacturer's warranty. Warranty and post-warranty service provided by Dambat.