RAINER 1000 INOX - submersible pump with float switch
The IBO RAINER 1000 INOX submersible pump is a device with a stainless steel housing, designed for pumping clean and slightly contaminated water that does not contain abrasive elements such as sand, as well as chlorinated water. The built-in float switch automatically controls the pump’s operation and protects it from running without water.
Who is it for?
-
Homeowners and allotment holders – the pump supplies water to households and irrigation systems.
-
Installation and service companies – the built-in float switch automates the pump’s operation without additional control equipment.
-
Users of rainwater collection systems – the pump is suitable for use with rainwater and chlorinated water.
-
Owners of deep wells and tanks – its ability to pump water down to approximately 1 mm allows the tank to be almost completely emptied.
Applications
The RAINER 1000 INOX submersible pump is designed for pumping clean and slightly contaminated water that does not contain abrasive elements such as sand, as well as chlorinated water. The pump is primarily used to supply water to households, irrigation systems and rainwater collection systems.
It can also be used to pump clean water out of flooded rooms. The device operates in a vertical position, with a maximum pumped-liquid temperature of 35°C, and can empty a tank down to a water level of approximately 1 mm.
Features of the RAINER 1000 INOX pump
The pump has a housing made of AISI 304 stainless steel and plastic, while the shaft is made of AISI 304 stainless steel. The impeller is made of PPO polymer, and the mechanical seal uses a SiC/graphite/NBR configuration.
The built-in float automatically controls the pump’s operation according to the water level and provides basic protection against dry running. The cooling jacket allows the pump to operate without being fully submerged in water, while the vent valve automatically removes air from the system. Thermal protection built into the motor protects the pump from overheating.
- Pump type: submersible pump with float switch
- Power supply: 230 V (single-phase)
- Insulation class: B
- Protection rating: IPX8
- Operating mode: continuous
- Operating position: vertical
- Rotational speed: 2850 rpm
- Impeller passage: 1mm
- Max. liquid temperature: 35°C
- Pumping capacity: down to approximately 1 mm
- Power cable length: 10 m
- Switch: built-in float switch
- Motor protection: thermal, built into the motor
- Connection: threaded, 1"
- Materials: housing – AISI 304 stainless steel / plastic, shaft – AISI 304 stainless steel, impeller – PPO polymer, mechanical seal – SiC/graphite/NBR
IBO – 24 months (2 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and water-management equipment with quality certificates.
Frequently asked questions (FAQ) – RAINER 1000 INOX submersible pump
What type of water is the RAINER INOX pump designed for?
The pump is designed for clean and slightly contaminated water that does not contain abrasive elements such as sand, as well as chlorinated water.
To what level can the RAINER INOX pump empty a tank?
The pump can empty a tank down to a water level of approximately 1 mm, allowing almost all the water to be removed without manually pumping out the remaining water.
How does the pump protect itself against dry running?
Protection is provided by the built-in float switch, which cuts off power to the motor when the water level falls below the safe minimum. In addition, thermal protection protects the motor from overheating.
What is the difference between the RAINER 1000/1200 INOX and the RAINER 1200 AUTO?
The RAINER 1000 INOX and RAINER 1200 INOX use a traditional float switch, while the RAINER 1200 AUTO and RAINER 1200 AUTO STORM have an electronic control unit that responds to changes in system pressure, along with additional leak protection and a drip-irrigation operating program.
Where can I buy the RAINER INOX submersible pump?
Dambat does not sell directly to customers. The RAINER 1000 INOX and RAINER 1200 INOX pumps are available from sales partners, installation wholesalers and authorised online distributors.
What warranty terms apply to the RAINER INOX pump?
IBO – 24 months (2 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
