Description
The PRN tractor pump is single-stage, centrifugal, normally suction pump driven by the tractor's PTO shaft (PTO 540 rpm). Designed to collect clean water from ponds, rivers, lakes and wells and to supply irrigation systems in agriculture, horticulture and vegetable crops. The set includes a power take-off shaft.
Who is the PRN tractor pump for?
- Farmers and farms – effective irrigation of fields from natural water reservoirs without the need to purchase a separate engine.
- Fruit growers – reliable Power supply irrigation systems in orchards requiring higher operating pressure.
- Vegetable producers – efficient water intake from ponds, rivers and lakes directly to irrigation installations in vegetable crops.
- Owners of ponds and retention reservoirs – pumping water from tanks while maintaining the water level above 6 m from the pump inlet.
- Agricultural tractor users (15-125 HP) – full use of the existing tractor infrastructure as a source of pump drive.
Application of the PRN tractor pump
- Irrigation of agricultural crops – Power supply any irrigation systems requiring increased pressure in agricultural production.
- Water abstraction from ponds, rivers and lakes – pumping clean water from open reservoirs and natural streams.
- Water withdrawal from a well – work at a water depth of up to 6 m from the pump inlet during pumping.
- Power supply installations in fruit and vegetable farming – effective supply of pressurized water to drip and sprinkler systems.
The PRN tractor pump is an ideal solution for irrigation with pressure systems in any type of agricultural production.
Features, construction and technical data - PRN tractor pump
PRN tractor pump is a single-stage, normally suction centrifugal pump mounted on painted steel frame equipped with three-point suspension system enabling direct installation on an agricultural tractor. The pump is driven via power take-off shaft (PTO) tractor at the required revolutions 540 rpm.
The revolutions from the PTO are transmitted through power take-off shaft (supplied with the pump) on gearbox with a gear ratio of 6.6, which then drives the actual pump rotor. This solution allows for obtaining appropriate operating parameters without the need to use external gears.
Technical parameters
| Parameter | Value |
|---|---|
| Pump type | Single stage, centrifugal, normally suction |
| Drive | Tractor power take-off shaft (PTO). |
| Required PTO revolutions | 540 rpm |
| Gear ratio | 6,6 |
| Minimum tractor power | 15 KM |
| Maximum tractor power | 125 HP |
| Maximum suction depth | 6 m (water surface from the pump inlet) |
| Suspension system | Three-point (tractor's three-point hitch) |
| Frame | Painted, steel |
| Included | Power take-off shaft |
Working conditions and requirements
Before starting the pump it is necessary flooding the pump with the suction hose – the pump is not self-priming. Pumped water must be clean, without solid impurities. During pumping, the water table in the spring cannot fall below it 6 m from the pump inlet.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – PRN tractor pump
What is the PRN tractor pump used for?
Pump PRN is intended for pumping clean water from ponds, rivers, lakes, retention reservoirs and wells. Perfect for powering irrigation systems in agricultural, vegetable and fruit crops requiring increased pressure.
How much tractor power do I need to drive the PRN pump?
Tractor pump PRN requires a powerful tractor from 15 HP to 125 HP. The tractor must be equipped with power take-off shaft (PTO) operating at a speed of 540 rpm.
Is the PRN pump self-priming?
No – pump PRN is a pump sucking normally, which means that before each launch you must prime the pump with the suction hose. Without this step, the pump will not function properly.
From what depth can the PRN pump draw water?
Tractor pump PRN can draw water from sources where the water table is low during pumping does not fall below 6 m from the pump inlet. This applies to both wells and open water reservoirs.
Is additional gear or equipment needed for the PRN pump?
No - the pump is equipped with a built-in one gearbox with a gear ratio of 6.6, and is supplied with the pump power take-off shaft. Just connect the pump to the tractor's PTO and you can start working.
Where can you buy the Dambat PRN tractor pump?
Tractor pump PRN can be purchased online on the page dambat.pl, and also stationary and via the network distributors and wholesalers cooperating with the Dambat brand. If you have any questions about availability, please contact the seller directly.
What is the warranty on the PRN tractor pump?
Content compiled from general data. Contact us for details - detailed warranty conditions for the pump PRN can be found in the product documentation or by contacting Dambat directly.
- Lifting: 70.0 m,
- Performance: 750.0 l/min.,
- Suction capacity: m,
- Power: kW,
- Power supply: ,
- Frequency: Hz,
- Power consumption: Oh,
- Motor Speed: 3600 rpm ,
- Dimensions: mm
- Weight: 65.0 kg,
The PRN tractor pump is single-stage, centrifugal, normally suction pump driven by the tractor's PTO shaft (PTO 540 rpm). Designed to collect clean water from ponds, rivers, lakes and wells and to supply irrigation systems in agriculture, horticulture and vegetable crops. The set includes a power take-off shaft.
Who is the PRN tractor pump for?
- Farmers and farms – effective irrigation of fields from natural water reservoirs without the need to purchase a separate engine.
- Fruit growers – reliable Power supply irrigation systems in orchards requiring higher operating pressure.
- Vegetable producers – efficient water intake from ponds, rivers and lakes directly to irrigation installations in vegetable crops.
- Owners of ponds and retention reservoirs – pumping water from tanks while maintaining the water level above 6 m from the pump inlet.
- Agricultural tractor users (15-125 HP) – full use of the existing tractor infrastructure as a source of pump drive.
Application of the PRN tractor pump
- Irrigation of agricultural crops – Power supply any irrigation systems requiring increased pressure in agricultural production.
- Water abstraction from ponds, rivers and lakes – pumping clean water from open reservoirs and natural streams.
- Water withdrawal from a well – work at a water depth of up to 6 m from the pump inlet during pumping.
- Power supply installations in fruit and vegetable farming – effective supply of pressurized water to drip and sprinkler systems.
The PRN tractor pump is an ideal solution for irrigation with pressure systems in any type of agricultural production.
Features, construction and technical data - PRN tractor pump
PRN tractor pump is a single-stage, normally suction centrifugal pump mounted on painted steel frame equipped with three-point suspension system enabling direct installation on an agricultural tractor. The pump is driven via power take-off shaft (PTO) tractor at the required revolutions 540 rpm.
The revolutions from the PTO are transmitted through power take-off shaft (supplied with the pump) on gearbox with a gear ratio of 6.6, which then drives the actual pump rotor. This solution allows for obtaining appropriate operating parameters without the need to use external gears.
Technical parameters
| Parameter | Value |
|---|---|
| Pump type | Single stage, centrifugal, normally suction |
| Drive | Tractor power take-off shaft (PTO). |
| Required PTO revolutions | 540 rpm |
| Gear ratio | 6,6 |
| Minimum tractor power | 15 KM |
| Maximum tractor power | 125 HP |
| Maximum suction depth | 6 m (water surface from the pump inlet) |
| Suspension system | Three-point (tractor's three-point hitch) |
| Frame | Painted, steel |
| Included | Power take-off shaft |
Working conditions and requirements
Before starting the pump it is necessary flooding the pump with the suction hose – the pump is not self-priming. Pumped water must be clean, without solid impurities. During pumping, the water table in the spring cannot fall below it 6 m from the pump inlet.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – PRN tractor pump
What is the PRN tractor pump used for?
Pump PRN is intended for pumping clean water from ponds, rivers, lakes, retention reservoirs and wells. Perfect for powering irrigation systems in agricultural, vegetable and fruit crops requiring increased pressure.
How much tractor power do I need to drive the PRN pump?
Tractor pump PRN requires a powerful tractor from 15 HP to 125 HP. The tractor must be equipped with power take-off shaft (PTO) operating at a speed of 540 rpm.
Is the PRN pump self-priming?
No – pump PRN is a pump sucking normally, which means that before each launch you must prime the pump with the suction hose. Without this step, the pump will not function properly.
From what depth can the PRN pump draw water?
Tractor pump PRN can draw water from sources where the water table is low during pumping does not fall below 6 m from the pump inlet. This applies to both wells and open water reservoirs.
Is additional gear or equipment needed for the PRN pump?
No - the pump is equipped with a built-in one gearbox with a gear ratio of 6.6, and is supplied with the pump power take-off shaft. Just connect the pump to the tractor's PTO and you can start working.
Where can you buy the Dambat PRN tractor pump?
Tractor pump PRN can be purchased online on the page dambat.pl, and also stationary and via the network distributors and wholesalers cooperating with the Dambat brand. If you have any questions about availability, please contact the seller directly.
What is the warranty on the PRN tractor pump?
Content compiled from general data. Contact us for details - detailed warranty conditions for the pump PRN can be found in the product documentation or by contacting Dambat directly.
