Description
PC-20P—electronic pump controller with 1¼" connection
The PC-20P by IBO is an electronic pump controller that automatically controls pump operation and maintains constant water pressure in the system. It is equipped with larger 1¼" connections, making it suitable for systems with higher flow rates. It supports more powerful single-phase pumps and can automatically resume operation after a water outage. It replaces a traditional pressure switch, automatically controlling pump activation.
Who is it for
- Installers and plumbers—the 1¼" connections make installation easier in systems with larger-diameter pipes, while the pre-wired design shortens connection time.
- Homeowners with their own water intake—the controller maintains pressure and automatically restarts the pump after a temporary lack of water.
- Users of more powerful single-phase pumps—the device supports pumps with a higher current draw than basic controllers.
- Higher-flow systems—larger connections reduce resistance along the water flow path.
Applications
The PC-20P is suitable for domestic and utility water systems supplied by a single-phase surface or submersible pump, especially where larger-diameter pipes are used. It responds to actual water usage, so water is available immediately after turning on a tap or opening sprinklers. Its ability to operate pumps drawing up to 16 A allows it to be used with more powerful pump sets.
The device is designed for clean water without mechanical impurities. It is installed on the pump's discharge side in a vertical position. In a single-phase system with a higher flow rate, the PC-20P 230 V electronic pump controller detects water usage based on pressure and flow, so it does not start the pump unnecessarily in response to minor leaks.
Features of the PC-20P controller
The PC-20P determines pump operation based on the pressure in the system and the flow of water in the pipe. When it detects a lack of water, it stops the pump and signals a fault by flashing the Status LED. If the user does not restart the pump manually, the controller automatically retries every hour until normal flow is restored or the power supply is disconnected. The first start-up and manual restart are performed using the RESET button.
The most important feature distinguishing the PC-20P from the basic PC-10P is its 1¼" connections, which are better suited to systems with higher flow rates. The device has a built-in check valve that prevents water from flowing back into the pump, while the LEDs indicate the pump status—power, operation, and any potential fault. The PC-20P supports single-phase pumps drawing up to 16 A, corresponding to motors with power ratings of up to 2.2 kW. It is installed on the pump's discharge side, between the pump and the first water outlet.
- Brand: IBO
- Type: automatic booster pump controller for single-phase pumps
- Power supply: 230 V, 50 Hz
- Maximum power of supported pump: 2.2 kW
- Maximum current: 16 A
- Cut-in pressure: 1.5 bar
- Maximum system pressure: 10 bar
- Ingress protection rating: IP65
- Protection: dry-run protection, automatic restart
- Features: built-in check valve, RESET button, indicator LEDs
- Maximum water temperature: 40°C
- Connections: 1¼" / 1¼"
IBO – 24-month (2-year) manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certifications.
Frequently asked questions (FAQ) – PC-20P automatic pump controller
What is the PC-20P automatic pump controller used for?
The PC-20P is an automatic booster pump controller that independently controls the pump and maintains constant water pressure. The pump starts when someone opens a tap and stops when the water flow is shut off. Thanks to its 1¼" connections, it works well in installations with higher flow rates.
Which pumps is the PC-20P compatible with?
The controller supports single-phase pumps drawing up to 16 A, corresponding to motors with a power output of up to 2.2 kW, supplied at 230 V. It is suitable for surface and submersible pumps operating with clean water free of mechanical impurities.
How does the PC-20P differ from the PC-10P model?
The PC-20P has larger 1¼" connections, which are better suited to installations with higher flow rates, while the PC-10P has 1" connections and a built-in pressure gauge. The electrical specifications of both models are the same. You can find both in the controllers category.
How does the automatic restart work in the PC-20P?
When a lack of water is detected, the controller stops the pump and indicates this by a flashing LED. If the user does not start the pump manually, the device automatically retries every hour until the water returns. This allows the installation to resume operation without the user's presence.
Does the PC-20P protect the pump against dry running?
Yes. When there is no water, the controller stops the pump, protecting it from overheating and damage. The pump can be started manually with the RESET button or you can wait for the automatic restart.
Where can I buy the PC-20P automatic pump controller?
As the manufacturer, we do not sell directly. The IBO PC-20P automatic pump controller can be purchased from our trade partners, plumbing wholesalers, and authorized online distributors.
What is the warranty on the PC-20P automatic pump controller?
IBO – 24-month (2-year) manufacturer's warranty.
- Type: ,
- Number of pumps supported: 1,
- Maximum power: kW,
- Power supply: 1~230 V,
- Frequency: 50 Hz,
- Maximum supported current: 16.0 A
- Protection rating:
- Maximum liquid temperature: °C
- Dimensions: mm,
- Weight: 2.0 kg.
PC-20P—electronic pump controller with 1¼" connection
The PC-20P by IBO is an electronic pump controller that automatically controls pump operation and maintains constant water pressure in the system. It is equipped with larger 1¼" connections, making it suitable for systems with higher flow rates. It supports more powerful single-phase pumps and can automatically resume operation after a water outage. It replaces a traditional pressure switch, automatically controlling pump activation.
Who is it for
- Installers and plumbers—the 1¼" connections make installation easier in systems with larger-diameter pipes, while the pre-wired design shortens connection time.
- Homeowners with their own water intake—the controller maintains pressure and automatically restarts the pump after a temporary lack of water.
- Users of more powerful single-phase pumps—the device supports pumps with a higher current draw than basic controllers.
- Higher-flow systems—larger connections reduce resistance along the water flow path.
Applications
The PC-20P is suitable for domestic and utility water systems supplied by a single-phase surface or submersible pump, especially where larger-diameter pipes are used. It responds to actual water usage, so water is available immediately after turning on a tap or opening sprinklers. Its ability to operate pumps drawing up to 16 A allows it to be used with more powerful pump sets.
The device is designed for clean water without mechanical impurities. It is installed on the pump's discharge side in a vertical position. In a single-phase system with a higher flow rate, the PC-20P 230 V electronic pump controller detects water usage based on pressure and flow, so it does not start the pump unnecessarily in response to minor leaks.
Features of the PC-20P controller
The PC-20P determines pump operation based on the pressure in the system and the flow of water in the pipe. When it detects a lack of water, it stops the pump and signals a fault by flashing the Status LED. If the user does not restart the pump manually, the controller automatically retries every hour until normal flow is restored or the power supply is disconnected. The first start-up and manual restart are performed using the RESET button.
The most important feature distinguishing the PC-20P from the basic PC-10P is its 1¼" connections, which are better suited to systems with higher flow rates. The device has a built-in check valve that prevents water from flowing back into the pump, while the LEDs indicate the pump status—power, operation, and any potential fault. The PC-20P supports single-phase pumps drawing up to 16 A, corresponding to motors with power ratings of up to 2.2 kW. It is installed on the pump's discharge side, between the pump and the first water outlet.
- Brand: IBO
- Type: automatic booster pump controller for single-phase pumps
- Power supply: 230 V, 50 Hz
- Maximum power of supported pump: 2.2 kW
- Maximum current: 16 A
- Cut-in pressure: 1.5 bar
- Maximum system pressure: 10 bar
- Ingress protection rating: IP65
- Protection: dry-run protection, automatic restart
- Features: built-in check valve, RESET button, indicator LEDs
- Maximum water temperature: 40°C
- Connections: 1¼" / 1¼"
IBO – 24-month (2-year) manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certifications.
Frequently asked questions (FAQ) – PC-20P automatic pump controller
What is the PC-20P automatic pump controller used for?
The PC-20P is an automatic booster pump controller that independently controls the pump and maintains constant water pressure. The pump starts when someone opens a tap and stops when the water flow is shut off. Thanks to its 1¼" connections, it works well in installations with higher flow rates.
Which pumps is the PC-20P compatible with?
The controller supports single-phase pumps drawing up to 16 A, corresponding to motors with a power output of up to 2.2 kW, supplied at 230 V. It is suitable for surface and submersible pumps operating with clean water free of mechanical impurities.
How does the PC-20P differ from the PC-10P model?
The PC-20P has larger 1¼" connections, which are better suited to installations with higher flow rates, while the PC-10P has 1" connections and a built-in pressure gauge. The electrical specifications of both models are the same. You can find both in the controllers category.
How does the automatic restart work in the PC-20P?
When a lack of water is detected, the controller stops the pump and indicates this by a flashing LED. If the user does not start the pump manually, the device automatically retries every hour until the water returns. This allows the installation to resume operation without the user's presence.
Does the PC-20P protect the pump against dry running?
Yes. When there is no water, the controller stops the pump, protecting it from overheating and damage. The pump can be started manually with the RESET button or you can wait for the automatic restart.
Where can I buy the PC-20P automatic pump controller?
As the manufacturer, we do not sell directly. The IBO PC-20P automatic pump controller can be purchased from our trade partners, plumbing wholesalers, and authorized online distributors.
What is the warranty on the PC-20P automatic pump controller?
IBO – 24-month (2-year) manufacturer's warranty.