PC-15 - hydrophore machine
PC-15 by IBO is an electronic hydrophore automat that controls the operation of the pump depending on the water consumption. It turns on the pump when you turn on the tap and turns it off when you turn it off, replacing the pressure switch and the hydrophore tank at the same time. This makes the entire system simpler and takes up less space. The device protects the pump against dry running, and the built-in pressure gauge and RESET button facilitate daily operation.
For whom
- Installers and plumbers - PC-15 replaces the pressure switch and the hydrophore tank, so the system is easier to install, and the ready-made wiring shortens the connection time.
- Home owners with their own water intake - the automatic device maintains the pressure in the installation and stops the pump when there is no water.
- Users of surface and submersible pumps - one device supports both types of single-phase pumps.
- Allotment gardeners and farms - automates the operation of the pump when collecting water, watering the garden and powering sprinklers.
Application
PC-15 is suitable for home and garden water installations powered by a single-phase pump, both surface and submersible. It turns the pump on when the pressure drops below the set threshold and flow appears in the pipe, and turns it off when the flow stops. In practice, the automatic device starts the pump when you turn on the tap or opens the sprinklers and stops it when you close them, so that water is available on an ongoing basis.
The device works with clean water without mechanical impurities and is mounted on the discharge side of the pump. In a typical single-phase home installation, the PC-15 230 V pressure relief unit recognizes water consumption based on the flow, so it does not turn on the pump unnecessarily in the event of minor leaks.
Features of the PC-15 machine
PC-15 controls the pump based on water pressure and flow. Thanks to its functionality, the device allows you to resign from the classic hydrophore tank for maintaining pressure. When you turn on the tap, it starts the pump and when you turn it off, it turns it off. Built-in dry-running protection stops the pump when it runs out of water and protects it from damage. The first start-up and restart after protection is activated are performed using the RESET button.
The device has a built-in check valve that prevents water from flowing back into the pump, and a pressure gauge showing the current pressure in the installation. The diodes communicate the pump status - power supply, operation and possible failure. PC-15 works with single-phase pumps with a current consumption of up to 10 A and is mounted between the pump and the first water receiver.
- Brand: IBO
- Type: hydrophore machine for single-phase pumps
- Power supply: 230V, 50Hz
- Maximum power of the supported pump: 1.1 kW
- Maximum current: 10A
- Turn-on pressure: 1.5 bar
- Maximum system pressure: 10 bar
- Degree of protection: IP54
- Security: protection against dry running
- Equipment: built-in non-return valve, pressure gauge, RESET button, signaling diodes
- Maximum water temperature: 40°C
- Connections: 1" / 1"
IBO – 24 months (2 years) manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – PC-15 machine
What is the PC-15 machine used for?
PC-15 is a hydrophore device that turns on the pump when you turn on the tap and turns it off when you turn it off. It replaces the pressure switch and the hydrophore tank and protects the pump against dry running.
What pumps does PC-15 work with?
The machine is designed for single-phase, surface and deep-well pumps, with a power of up to 1.1 kW and a current consumption of up to 10 A, with a 230 V power supply. It works with clean water without mechanical impurities.
Does PC-15 replace a hydrophore tank?
Yes. PC-15 controls the pump based on pressure and flow, thus replacing both a pressure switch and a hydrophore tank. This allows you to simplify installation and reduce the number of system elements.
Does PC-15 protect the pump against dry running?
Yes. When there is no water, the machine stops the pump, which protects it against damage. The pump is restarted by pressing the RESET button after refilling the water.
What is the difference between PC-15 and PC-59?
PC-15 has an IP54 protection rating and fixed settings, a PC-59 it has IP65, adjustable on and off pressure and two operating modes. You will find both models in the category drivers.
Where to buy the PC-15 machine?
As a manufacturer, we do not sell directly. The IBO PC-15 automatic machine can be purchased from our trading partners, installation wholesalers and authorized online distributors.
What is the warranty for the PC-15 machine?
IBO – 24 months (2 years) manufacturer's warranty.
