Description
PC-10P - hydrophore machine
PC-10P by IBO is an electronic pressure booster that independently controls the operation of the pump and maintains constant water pressure in the installation. It supports more powerful single-phase pumps, and after a water outage it can automatically resume operation without user intervention. It replaces a traditional pressure switch, independently controlling the pump activation. The built-in pressure gauge and RESET button make operation easier.
For whom
- Installers and plumbers - PC-10P replaces a traditional pressure switch, and ready-made wiring reduces connection time.
- Home owners with their own water intake - the machine maintains the pressure and automatically resumes pump operation after a temporary lack of water.
- Users of more powerful single-phase pumps - the device supports pumps with higher power consumption than basic machines.
- Allotment gardeners and farms - automates the operation of the pump when collecting water, watering the garden and powering sprinklers.
Application
PC-10P is suitable for home and garden water installations powered by a single-phase, surface or deep-well pump. It reacts to the actual water consumption, so water is available immediately after turning on the tap or opening the sprinklers. Thanks to the support for pumps with a current consumption of up to 16 A, it is also suitable for more powerful pump sets.
The device works with clean water without mechanical impurities. Installation takes place on the discharge side of the pump, in a vertical position. In a typical single-phase home installation, the PC-10P 230 V pressure relief unit recognizes water consumption based on pressure and flow, so it does not activate the pump unnecessarily in the event of minor leaks.
Features of the PC-10P machine
The operation of the PC-10P pump is determined by the pressure in the installation and the water flow in the pipe. After detecting a lack of water, it stops the pump and signals the failure by flashing the Status LED. If the user does not start the pump manually, the machine automatically tries again every hour until normal flow is restored or the power is disconnected. The first start-up and manual resumption of operation are performed using the RESET button.
PC-10P has a built-in check valve that prevents water from flowing back into the pump, and a pressure gauge showing the current pressure in the installation. The diodes communicate the pump status - power supply, operation and possible failure. The device supports single-phase pumps with a current consumption of up to 16 A, which corresponds to motors with a power of up to 2.2 kW. They are installed on the discharge side of the pump, between it and the first water receiver.
- Brand: IBO
- Type: hydrophore machine for single-phase pumps
- Power supply: 230V, 50Hz
- Maximum power of the supported pump: 2.2 kW
- Maximum current: 16A
- Turn-on pressure: 1.5 bar
- Maximum system pressure: 10 bar
- Degree of protection: IP65
- Security: dry running protection, automatic restart
- Equipment: built-in non-return valve, pressure gauge, RESET button, signaling diodes
- Maximum water temperature: 40°C
- Connections: 1" / 1"
IBO – 24 months (2 years) manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – PC-10P machine
What is the PC-10P machine used for?
PC-10P is a hydrophore machine that independently controls the pump and maintains constant water pressure. The pump starts when someone turns on the tap and stops when the intake is closed. The device replaces a traditional pressure switch and protects the pump against dry running.
What pumps does PC-10P work with?
The machine supports single-phase pumps with a current consumption of up to 16 A, which corresponds to motors with a power of up to 2.2 kW, with a 230 V power supply. It is suitable for surface and deep-well pumps operating with clean water without mechanical impurities.
What is the automatic restart in PC-10P?
After detecting a lack of water, the machine stops the pump and signals it by flashing the diode. If the user does not start the pump manually, the device will try again every hour until the water returns. Thanks to this, the installation can return to operation without the presence of the user.
Does PC-10P protect the pump against dry running?
Yes. When there is no water, the machine stops the pump, which protects it against overheating and damage. The pump can be started manually by pressing the RESET button or waiting for automatic restart.
What is the difference between PC-10P and PC-20P?
PC-10P has 1" connections and a built-in pressure gauge PC-20P has thicker 1¼" connections, which facilitates installation in installations with higher flow. You will find both models in the category drivers.
Where to buy the PC-10P machine?
As a manufacturer, we do not sell directly. The IBO PC-10P automatic machine can be purchased from our trading partners, installation wholesalers and authorized online distributors.
What is the warranty for the PC-10P machine?
IBO – 24 months (2 years) manufacturer's warranty.
- Type: Pump controller,
- Number of supported pumps: 1,
- Maximum power: kW,
- Power supply: ,
- Frequency: 50 Hz,
- Maximum Current Supported: 16.0 A
- Degree of protection: IP65
- Maximum liquid temperature: 40°C
- Dimensions: mm,
- Weight: 1.0 kg.
PC-10P - hydrophore machine
PC-10P by IBO is an electronic pressure booster that independently controls the operation of the pump and maintains constant water pressure in the installation. It supports more powerful single-phase pumps, and after a water outage it can automatically resume operation without user intervention. It replaces a traditional pressure switch, independently controlling the pump activation. The built-in pressure gauge and RESET button make operation easier.
For whom
- Installers and plumbers - PC-10P replaces a traditional pressure switch, and ready-made wiring reduces connection time.
- Home owners with their own water intake - the machine maintains the pressure and automatically resumes pump operation after a temporary lack of water.
- Users of more powerful single-phase pumps - the device supports pumps with higher power consumption than basic machines.
- Allotment gardeners and farms - automates the operation of the pump when collecting water, watering the garden and powering sprinklers.
Application
PC-10P is suitable for home and garden water installations powered by a single-phase, surface or deep-well pump. It reacts to the actual water consumption, so water is available immediately after turning on the tap or opening the sprinklers. Thanks to the support for pumps with a current consumption of up to 16 A, it is also suitable for more powerful pump sets.
The device works with clean water without mechanical impurities. Installation takes place on the discharge side of the pump, in a vertical position. In a typical single-phase home installation, the PC-10P 230 V pressure relief unit recognizes water consumption based on pressure and flow, so it does not activate the pump unnecessarily in the event of minor leaks.
Features of the PC-10P machine
The operation of the PC-10P pump is determined by the pressure in the installation and the water flow in the pipe. After detecting a lack of water, it stops the pump and signals the failure by flashing the Status LED. If the user does not start the pump manually, the machine automatically tries again every hour until normal flow is restored or the power is disconnected. The first start-up and manual resumption of operation are performed using the RESET button.
PC-10P has a built-in check valve that prevents water from flowing back into the pump, and a pressure gauge showing the current pressure in the installation. The diodes communicate the pump status - power supply, operation and possible failure. The device supports single-phase pumps with a current consumption of up to 16 A, which corresponds to motors with a power of up to 2.2 kW. They are installed on the discharge side of the pump, between it and the first water receiver.
- Brand: IBO
- Type: hydrophore machine for single-phase pumps
- Power supply: 230V, 50Hz
- Maximum power of the supported pump: 2.2 kW
- Maximum current: 16A
- Turn-on pressure: 1.5 bar
- Maximum system pressure: 10 bar
- Degree of protection: IP65
- Security: dry running protection, automatic restart
- Equipment: built-in non-return valve, pressure gauge, RESET button, signaling diodes
- Maximum water temperature: 40°C
- Connections: 1" / 1"
IBO – 24 months (2 years) manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – PC-10P machine
What is the PC-10P machine used for?
PC-10P is a hydrophore machine that independently controls the pump and maintains constant water pressure. The pump starts when someone turns on the tap and stops when the intake is closed. The device replaces a traditional pressure switch and protects the pump against dry running.
What pumps does PC-10P work with?
The machine supports single-phase pumps with a current consumption of up to 16 A, which corresponds to motors with a power of up to 2.2 kW, with a 230 V power supply. It is suitable for surface and deep-well pumps operating with clean water without mechanical impurities.
What is the automatic restart in PC-10P?
After detecting a lack of water, the machine stops the pump and signals it by flashing the diode. If the user does not start the pump manually, the device will try again every hour until the water returns. Thanks to this, the installation can return to operation without the presence of the user.
Does PC-10P protect the pump against dry running?
Yes. When there is no water, the machine stops the pump, which protects it against overheating and damage. The pump can be started manually by pressing the RESET button or waiting for automatic restart.
What is the difference between PC-10P and PC-20P?
PC-10P has 1" connections and a built-in pressure gauge PC-20P has thicker 1¼" connections, which facilitates installation in installations with higher flow. You will find both models in the category drivers.
Where to buy the PC-10P machine?
As a manufacturer, we do not sell directly. The IBO PC-10P automatic machine can be purchased from our trading partners, installation wholesalers and authorized online distributors.
What is the warranty for the PC-10P machine?
IBO – 24 months (2 years) manufacturer's warranty.
