NISMO 1100 - intelligent pump with inverter
NISMO 1100 is an intelligent pump with an inverter that maintains constant water pressure in the house and the entire property, regardless of how many taps are open. It draws raw water from its own well or raises too low pressure from the water supply network, and with a power of 1100 W it achieves as much as 166 l/min of efficiency and 55 m of lifting capacity. It works quietly and consumes less energy than a classic hydrophore set.
For whom
- Large single-family houses - constant pressure even with several bathrooms and consumption points operating simultaneously (up to 10 taps).
- Commercial premises and small facilities – efficient and continuous operation with variable water demand.
- Users of weak or old water supply networks - effective raising of too low pressure, also to higher floors.
- Gardeners and allotment gardeners – efficient Power supply irrigation with water from a well or reservoir.
- Installers – simple button configuration without separate automation, clear parameters and manufacturer's support.
Application
The NISMO 1100 pump plays the role of the heart of the home and backyard water installation: it draws raw water from your own well or raises too low pressure from the water supply network, maintaining an even flow at each draw-off valve. With a capacity of up to 166 l/min and 1½" connections, it is perfect for extensive installations and for modernizing the water system at home.
The device will also handle garden irrigation and watering with rainwater collected from the tank, as well as water supply for commercial premises. The NISMO 1100 230 V inverter pump works with typical installations found in Polish single-family houses.
Features of NISMO 1100
NISMO 1100 provides constant, strong water pressure throughout the house - regardless of whether you turn on one tap or use the shower, washing machine and kitchen at the same time. The pump turns on itself when the pressure drops after turning on the tap, and turns off when water consumption stops, adjusting the work rate to the current consumption.
The heart of the device is a permanent magnet motor that consumes over 30% less energy than a classic motor of the same power, and at the same time operates exceptionally quietly - at the level of 25-40 dB on a daily basis, and below 55 dB at full power. Soft start eliminates water hammer, which extends the life of the pump and installation. The low weight (approx. 10 kg) allows the device to be moved and installed by one person.
Operation is simple: just use the buttons to set the operating pressure in the range of 1.5-5.5 bar, and the pump will maintain it by itself. Safety is ensured by an extensive set of protections: protection against dry running (without additional probes and sensors in the well), overload, too high and low pressure and voltage, as well as protection against freezing and against too hot water. When the pump remains connected but not in use, the controller turns it on briefly once a day, preventing the hydraulic parts from stagnating.
- Max Lift: 55 m
- Max capacity: 166 l/min
- Suction capacity: 6 m
- Pressure setting range: 1.5–5.5 bar
- Power: 1100W (1.1kW)
- Engine speed: 4800 rpm
- Power supply: 1×230V (165-260V), 50-60Hz
- Drive: permanent magnet motor
- Noise Level: up to 55 dB
- Connections: 1½" × 1½"
- Degree of protection: IPX5
- Working mode: continuous
- Max. liquid temperature: 75°C
- Max. ambient temperature: 50°C
IBO – 24 months (2 years) manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – what is the NISMO 1100 pump used for?
What is the NISMO 1100 pump used for?
NISMO 1100 supplies large houses and commercial premises with raw water from its own well and relieves too low pressure from the water supply network. Thanks to the built-in inverter, it maintains constant pressure on all intake valves with a capacity of up to 166 l/min.
How does a pump with an inverter differ from a classic hydrophore set?
Instead of cyclical switching on and off, the pump smoothly regulates the engine speed, adapting it to the current water consumption. The result is constant pressure, gentle starts, quiet operation and significantly lower energy consumption than in a system without an inverter.
Will NISMO 1100 support a house with several bathrooms?
Yes, thanks to the capacity of up to 166 l/min and lifting up to 55 m, the pump maintains constant pressure even with several draw-off points operating simultaneously - the manufacturer indicates support for up to 10 taps. It will work well in a large single-family house and in a commercial premises.
Is NISMO 1100 suitable for watering the garden with rainwater from a tank?
Yes, the pump can draw water from a rainwater tank or well and power the irrigation system. When drawing from an open source, a mesh filter and a non-return valve should be installed at the suction end to prevent automatic emptying of the pipeline - the appropriate elements can be found in accessories for surface and hydrophore pumps.
Where can you buy the NISMO 1100 pump?
Dambat, as a manufacturer, does not conduct direct sales. The NISMO 1100 pump is available from our trading partners, installation wholesalers and authorized online distributors.
What warranty is covered by the NISMO 1100 pump?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
