MULTI IP 800 INOX (0.8 kW, 230 V) submersible pump with float switch

IBO MULTI IP 800 INOX (0.8 kW, 230 V) submersible pump with float switch

High pressure submersible pump IBO MULTI IP 800 INOX with a power of 0.8 kW is used for pumping clean and slightly polluted water. The device is equipped with an engine cooling jacket, which allows for safe operation without the need to be completely immersed in the pumped medium. A built-in float switch protects the equipment against dry running, facilitating maintenance-free operation in installations with variable water levels.

For whom (B2B)

• Water installation companies: the cooling jacket eliminates the problem of overheating the drive in shallow tanks, which facilitates safe installation in unusual facilities.
• Wholesale and technical stores: The pump enriches the warehouse offer in the segment of compact submersible devices for drainage and water distribution.
• Agricultural and horticultural farms: efficiency of 100 l/min guarantees stable Power supply extensive watering systems drawing water from ring wells.
• Maintenance departments: automatic control float switch improves emergency drainage of flooded technical rooms and basements.

Application

submersible pump IBO MULTI IP 800 INOX is used to water green areas and supply houses with water drawn from ring wells. The design also allows for trouble-free acquisition of medium from sources where the water table is close to the surface. The device is useful for pumping water from flooded basements, commercial buildings and for maintaining circulation in ponds.

The equipment is intended for pumping clean and slightly polluted water. According to the manufacturer's guidelines, work in an environment with the presence of abrasive agents in the pumped medium is not allowed, as it leads to accelerated wear of hydraulic components.

Features, description and technical data

The key advantage of the MULTI IP 800 INOX model is the design using a jacket that cools the motor circuit. This solution ensures adequate heat exchange, eliminating the requirement to fully immerse the pump in water. An additional advantage is the integrated float switch, which automatically controls the operation of the device and protects the mechanism against damage due to lack of medium.

The motor housing and the shaft with the rotor are made of AISI 304 stainless steel, while the rotor is made of resistant PPO polymer. The 0.8 kW motor has thermal protection built into the winding. The device is supplied with a 10-meter power cable with a plug, which greatly facilitates the installation process.

Technical data:

• Lifting: 30.0 m,
• Capacity: 100.0 l/min,
• Power: 0.8 kW,
• Power supply: 1~230V,
• Current: 4.2 A,
• Frequency: 50 Hz,
• Motor speed: 2850 rpm. ,
• Insulation class: B,
• Operating mode: continuous,
• Degree of protection: IP68,
• Connection [DN/inch]: 1,
• Outlet direction: Vertical,
• Built-in Float/probe: YES,
• Working position: Vertical,
• Power cable length: 10.0 m,
• Dimensions length/height/width: 350/165/165 mm,
• Weight: 8.2 kg,

MATERIALS:

• Motor housing: AISI 304 stainless steel,
• Shaft and rotor: AISI 304 stainless steel,
• Impeller: PPO polymer,
• Mechanical seal: Ceramic/Graphite/NBR.

FAQ – IBO MULTI IP 800 INOX (0.8 kW, 230 V) submersible pump with float switch (B2B)

Where is this product sold?

What is the service and warranty for IBO submersible pumps?

Does the pump have to be completely submerged during operation?

What medium can the MULTI IP 800 INOX pump pump?

What security features are built into this device?

Dambat is a trusted Polish manufacturer of pumps and hydrotechnical equipment with quality certificates.