MULTI IP INOX 1200 - submersible pump with float switch
MULTI IP INOX is a series of high-pressure submersible pumps from IBO with a float switch. Float controls the pump operation according to the water level and protects it against dry running. The pump pumps clean or slightly polluted water - for supplying water to the house, watering and pumping water out of flooded rooms.
For whom
-
Owners of ring wells – Power supply house into the water, with float switch protecting against dry running.
-
Allotment gardeners and gardeners – watering with water drawn from a well or reservoir.
-
People removing the effects of flooding – pumping clean water from flooded rooms.
-
Installers – pump with float switch and protection, in several power classes.
Application
MULTI IP INOX is used to supply water to houses and for watering, as well as to pump clean water from flooded rooms. The float switch controls the pump operation depending on the water level and protects it against dry running. The pump pumps clean or slightly polluted water, including water containing chlorine.
It is used in circular wells, rainwater tanks and when obtaining water from sources close to the surface. The cooling jacket allows operation without the pump being fully submerged. submersible pump MULTI IP INOX 230 V is suitable for watering and daily water consumption.
Features of the MULTI IP INOX submersible pump
MULTI IP INOX is high pressure Submersible pumps with float switch. Float turns the pump on and off depending on the water level, protecting it against dry running. The solution works well when drawing water from wells and emptying flooded rooms.
The design has a cooling jacket, so the pump does not have to be completely submerged. The motor is thermally protected and its low weight facilitates installation. The housing and shaft are made of AISI 304 stainless steel, the rotor is made of PPO polymer, and the mechanical stuffing box is made of SiC/graphite/NBR.
The series includes MULTI IP INOX 800, 1000 and 1200 models, differing in power (from 800 to 1200 W), lifting height (up to 44 m) and efficiency (up to 105 l/min). The pumps pump water without grinding elements such as sand.
- Type: high pressure submersible pump with float switch
- Engine power: 1200 W
- Power supply: 230V/50Hz
- Power consumption: 4.8A
- Rotational speed: 2850 RPM
- Discharge port: 1½"
- Max. liquid temperature: 35°C
- Working mode: continuous
- Degree of protection / insulation class: IPX8/B
- Controls: float switch (according to water level)
- Security: before dry running (Float), thermal (in the winding)
- Cooling: cooling jacket
Co-financing under the Microretention 2026 program
submersible pump MULTI IP INOX may be an element of a rainwater management installation covered by the nationwide "Microretention" program (2026). The program is addressed to owners of single-family houses and supports the retention and use of rainwater on their property - including: tanks, pumps, filters and infiltration systems. Find out more about the Microretention program on our website.
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – submersible pump MULTI IP INOX IBO
What is it for? submersible pump MULTI IP INOX?
MULTI IP INOX is high pressure submersible pump with a float switch, intended for supplying water to houses, watering and pumping clean water from flooded rooms. Float controls the pump operation according to the water level. The pump pumps clean or slightly polluted water.
How does the float switch in MULTI IP INOX work?
Float it rises and falls with the water level, turning the pump on and off. When the water level drops too low, Float turns off the pump, protecting it from running dry. The minimum immersion level of the pump during operation is 25 cm.
How does MULTI IP INOX differ from the AUTO version?
MULTI IP INOX has a float switch that controls the pump according to the water level. The AUTO version has an electronic automatic device that responds to the opening and closing of the valve and maintains constant pressure. INOX is better for collecting and emptying according to level, and AUTO for feeding the installation under pressure.
What water can be pumped with the MULTI IP pump?
The pump pumps clean or slightly polluted water, including water containing chlorine. Not suitable for water containing sand and abrasive particles, sewage, salty water or water containing oil. The maximum liquid temperature is 35°C.
Which MULTI IP INOX model should you choose?
The models differ in power (from 800 to 1200 W), lifting height (up to 44 m) and efficiency (up to 105 l/min). A more powerful model is chosen when the water demand is higher and the installation is higher. The selection is best adjusted to the intake depth and required pressure.
Where can you buy the MULTI IP INOX IBO pump?
As a manufacturer, we do not sell directly. The MULTI IP INOX submersible pump by IBO can be purchased from our trading partners, installation wholesalers and authorized online distributors. The model is selected according to the lifting height and water demand.
What is the warranty for the MULTI IP IBO pump?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat. If you have any questions about model selection, it is best to contact an authorized distributor.
