Description
MULTI IP AUTO 1200
MULTI IP AUTO is a series of high-pressure submersible pumps by IBO with an electronic control unit. The pump switches on when the valve is opened and switches off when it is closed, maintaining constant pressure in the system. It pumps clean or slightly contaminated water for domestic water supply, irrigation, and rainwater collection.
Who it is for
- Household users – constant water pressure thanks to the automatic control unit; the pump starts when the tap is opened.
- Allotment holders and gardeners – convenient watering with automatic pump start-up and shut-off.
- Rainwater tank owners – collecting rainwater for use on the property.
- Installers – a pump with a built-in automatic control unit, without the need for a separate automation set.
Applications
MULTI IP AUTO is used to supply homes with water and for watering wherever constant pressure in the system is required. The electronic control unit switches the pump off when the valve is closed and starts it when the valve is opened. The pump handles clean or slightly contaminated water, including water containing chlorine.
It is suitable for ring wells, rainwater tanks, and drawing water from sources with a water table close to the surface. The cooling jacket allows the pump to operate without being fully submerged. The MULTI IP AUTO 230 V submersible pump maintains constant pressure in a domestic water system.
Features of the MULTI IP AUTO submersible pump
MULTI IP AUTO is a series of high-pressure submersible pumps with an electronic control unit. When the outlet valve is closed, the pump switches off and enters standby mode while maintaining pressure. When the valve is opened, it starts automatically, and the built-in protection prevents dry running.
The design features a cooling jacket, so the pump does not have to be fully submerged. The motor is thermally protected, and its low weight makes installation easier. The housing and shaft are made of AISI 304 stainless steel, the impeller is made of PPO polymer, and the mechanical seal uses SiC/graphite/NBR.
The series includes the MULTI IP AUTO 1000 model (1.0 kW, head up to 40 m, flow rate up to 100 l/min) and the MULTI IP AUTO 1200 model (1.2 kW, up to 44 m and up to 105 l/min). The pumps are designed to handle water without abrasive materials such as sand.
- Type: high-pressure submersible pump with electronic automatic control
- Motor power: 1.2 kW (depending on the model)
- Power supply: 230 V / 50 Hz
- Current consumption: 5.2 A
- Rotational speed: 2850 RPM
- Discharge connection: 1½"
- Impeller passage: 1 mm (clean / slightly contaminated water)
- Max. liquid temperature: 35°C
- Operating mode: continuous
- Protection rating / insulation class: IP68 / IPX8 (depending on the model) / B
- Control: electronic automatic control (constant pressure)
- Protections: against dry running, thermal protection (in the winding)
- Cooling: cooling jacket
- Power cable length: 10 m
- Materials: AISI 304 housing and shaft, PPO polymer impeller, SiC/graphite/NBR mechanical seal
Funding under the Mikroretencja 2026 program
The MULTI IP AUTO submersible pump may form part of a rainwater management system covered by the nationwide “Mikroretencja” program (2026). The program is aimed at owners of single-family homes and supports the retention and use of rainwater on their own properties, including tanks, pumps, filters, and infiltration systems. Learn more about the Mikroretencja program on our website.
IBO – 24 months (2 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – IBO MULTI IP AUTO submersible pump
What is the MULTI IP AUTO submersible pump used for?
MULTI IP AUTO is a high-pressure submersible pump with an electronic automatic control unit, designed for supplying homes with water, irrigation, and rainwater collection. It maintains constant pressure and starts when the valve is opened. It handles clean or slightly contaminated water.
How does the automatic control unit in the MULTI IP AUTO pump work?
When the outlet valve is closed, the pump switches off and enters standby mode while maintaining pressure in the system. When the valve is opened, the pump starts automatically. This means it operates similarly to a domestic pressure-boosting system.
How does MULTI IP AUTO differ from the INOX version?
MULTI IP AUTO controls operation using an electronic automatic control unit that responds to the opening and closing of the valve while maintaining constant pressure. The INOX version has a float switch that controls the pump according to the water level. AUTO is better suited to supplying pressurized systems, while INOX is suitable for drawing and pumping out water according to the water level.
What type of water can be pumped with the MULTI IP pump?
The pump handles clean or slightly contaminated water, including water containing chlorine. It is not suitable for water containing sand or abrasive particles, wastewater, salt water, or oils. The maximum liquid temperature is 35°C.
Which model should I choose – MULTI IP AUTO 1000 or 1200?
MULTI IP AUTO 1000 has a power rating of 1.0 kW, a head of up to 40 m, and a flow rate of up to 100 l/min. MULTI IP AUTO 1200 has a power rating of 1.2 kW, a head of up to 44 m, and a flow rate of up to 105 l/min. The more powerful model is chosen for a higher system and greater water demand.
Where can I buy the IBO MULTI IP AUTO pump?
As a manufacturer, we do not sell directly. The IBO MULTI IP AUTO submersible pump can be purchased from our trade partners, installation wholesalers, and authorized online distributors. The model should be selected according to the required head and water demand.
What is the warranty on the IBO MULTI IP pump?
IBO – 24 months (2 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service. For advice on selecting a model, please contact an authorized distributor.
- Lift: 44.0 m,
- Capacity: 105.0 l/min.,
- Power: 1.2 kW,
- Power supply: 1~230 V,
- Current: 5.2 A,
- Frequency: 50 Hz,
- Motor speed: 2850 rpm,
- Insulation class: B,
- Operating mode: continuous,
- Protection rating: IPX8,
- Impeller type: ,
- Particle size: 9 mm,
- Connection [DN/cale]: 1x1½,
- Discharge direction: Vertical,
- Built-in float switch/probe: NO,
- Operating position: Vertical,
- Power cable length: 10.0 m,
- Length/height/width: 420/174/183 mm,
- Weight: 9.2 kg,
ADDITIONAL INFORMATION
• Maximum ambient temperature 40°C
MATERIALS
• Motor housing: AISI 304 stainless steel,
• Shaft and rotor: AISI 304 stainless steel,
• Impeller: PPO polymer,
• Mechanical seal: Ceramic/Carbon/NBR.
MULTI IP AUTO 1200
MULTI IP AUTO is a series of high-pressure submersible pumps by IBO with an electronic control unit. The pump switches on when the valve is opened and switches off when it is closed, maintaining constant pressure in the system. It pumps clean or slightly contaminated water for domestic water supply, irrigation, and rainwater collection.
Who it is for
- Household users – constant water pressure thanks to the automatic control unit; the pump starts when the tap is opened.
- Allotment holders and gardeners – convenient watering with automatic pump start-up and shut-off.
- Rainwater tank owners – collecting rainwater for use on the property.
- Installers – a pump with a built-in automatic control unit, without the need for a separate automation set.
Applications
MULTI IP AUTO is used to supply homes with water and for watering wherever constant pressure in the system is required. The electronic control unit switches the pump off when the valve is closed and starts it when the valve is opened. The pump handles clean or slightly contaminated water, including water containing chlorine.
It is suitable for ring wells, rainwater tanks, and drawing water from sources with a water table close to the surface. The cooling jacket allows the pump to operate without being fully submerged. The MULTI IP AUTO 230 V submersible pump maintains constant pressure in a domestic water system.
Features of the MULTI IP AUTO submersible pump
MULTI IP AUTO is a series of high-pressure submersible pumps with an electronic control unit. When the outlet valve is closed, the pump switches off and enters standby mode while maintaining pressure. When the valve is opened, it starts automatically, and the built-in protection prevents dry running.
The design features a cooling jacket, so the pump does not have to be fully submerged. The motor is thermally protected, and its low weight makes installation easier. The housing and shaft are made of AISI 304 stainless steel, the impeller is made of PPO polymer, and the mechanical seal uses SiC/graphite/NBR.
The series includes the MULTI IP AUTO 1000 model (1.0 kW, head up to 40 m, flow rate up to 100 l/min) and the MULTI IP AUTO 1200 model (1.2 kW, up to 44 m and up to 105 l/min). The pumps are designed to handle water without abrasive materials such as sand.
- Type: high-pressure submersible pump with electronic automatic control
- Motor power: 1.2 kW (depending on the model)
- Power supply: 230 V / 50 Hz
- Current consumption: 5.2 A
- Rotational speed: 2850 RPM
- Discharge connection: 1½"
- Impeller passage: 1 mm (clean / slightly contaminated water)
- Max. liquid temperature: 35°C
- Operating mode: continuous
- Protection rating / insulation class: IP68 / IPX8 (depending on the model) / B
- Control: electronic automatic control (constant pressure)
- Protections: against dry running, thermal protection (in the winding)
- Cooling: cooling jacket
- Power cable length: 10 m
- Materials: AISI 304 housing and shaft, PPO polymer impeller, SiC/graphite/NBR mechanical seal
Funding under the Mikroretencja 2026 program
The MULTI IP AUTO submersible pump may form part of a rainwater management system covered by the nationwide “Mikroretencja” program (2026). The program is aimed at owners of single-family homes and supports the retention and use of rainwater on their own properties, including tanks, pumps, filters, and infiltration systems. Learn more about the Mikroretencja program on our website.
IBO – 24 months (2 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – IBO MULTI IP AUTO submersible pump
What is the MULTI IP AUTO submersible pump used for?
MULTI IP AUTO is a high-pressure submersible pump with an electronic automatic control unit, designed for supplying homes with water, irrigation, and rainwater collection. It maintains constant pressure and starts when the valve is opened. It handles clean or slightly contaminated water.
How does the automatic control unit in the MULTI IP AUTO pump work?
When the outlet valve is closed, the pump switches off and enters standby mode while maintaining pressure in the system. When the valve is opened, the pump starts automatically. This means it operates similarly to a domestic pressure-boosting system.
How does MULTI IP AUTO differ from the INOX version?
MULTI IP AUTO controls operation using an electronic automatic control unit that responds to the opening and closing of the valve while maintaining constant pressure. The INOX version has a float switch that controls the pump according to the water level. AUTO is better suited to supplying pressurized systems, while INOX is suitable for drawing and pumping out water according to the water level.
What type of water can be pumped with the MULTI IP pump?
The pump handles clean or slightly contaminated water, including water containing chlorine. It is not suitable for water containing sand or abrasive particles, wastewater, salt water, or oils. The maximum liquid temperature is 35°C.
Which model should I choose – MULTI IP AUTO 1000 or 1200?
MULTI IP AUTO 1000 has a power rating of 1.0 kW, a head of up to 40 m, and a flow rate of up to 100 l/min. MULTI IP AUTO 1200 has a power rating of 1.2 kW, a head of up to 44 m, and a flow rate of up to 105 l/min. The more powerful model is chosen for a higher system and greater water demand.
Where can I buy the IBO MULTI IP AUTO pump?
As a manufacturer, we do not sell directly. The IBO MULTI IP AUTO submersible pump can be purchased from our trade partners, installation wholesalers, and authorized online distributors. The model should be selected according to the required head and water demand.
What is the warranty on the IBO MULTI IP pump?
IBO – 24 months (2 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service. For advice on selecting a model, please contact an authorized distributor.