MULTI IP INOX 1000 – submersible pump with float switch
MULTI IP INOX is a series of high-pressure submersible pumps from IBO with a float switch. The float controls the pump according to the water level and protects it from dry running. The pump delivers clean or slightly contaminated water—for supplying homes with water, watering, and pumping water out of flooded rooms.
Who it is for
-
Owners of ring wells – supplying homes with water, with a float protecting against dry running.
-
Allotment holders and gardeners – watering with water drawn from a well or tank.
-
People dealing with flooding – pumping clean water out of flooded rooms.
-
Installers – a pump with a float and safety features, available in several power ratings.
Applications
MULTI IP INOX is used to supply homes with water and for watering, as well as for pumping clean water out of flooded rooms. The float switch controls the pump according to the water level and protects it from dry running. The pump delivers clean or slightly contaminated water, including water containing chlorine.
It works well in ring wells, rainwater tanks, and when drawing water from sources with a water table close to the surface. The cooling jacket allows the pump to operate without being fully submerged. The MULTI IP INOX 230 V submersible pump is suitable for watering and everyday water collection.
Features of the MULTI IP INOX submersible pump
MULTI IP INOX is a series of high-pressure submersible pumps with a float switch. The float switches the pump on and off according to the water level, protecting it from dry running. This solution works well when drawing water from wells and when emptying flooded rooms.
The design features a cooling jacket, so the pump does not have to be fully submerged. The motor is thermally protected, while its low weight makes installation easier. The housing and shaft are made of AISI 304 stainless steel, the impeller is made of PPO polymer, and the mechanical seal uses SiC/graphite/NBR.
The series includes the MULTI IP INOX 800, 1000, and 1200 models, which differ in power (from 800 to 1200 W), head (up to 44 m), and output (up to 105 l/min). The pumps deliver water without abrasive particles such as sand.
- Type: high-pressure submersible pump with float switch
- Motor power: 1000 W
- Power supply: 230 V / 50 Hz
- Current draw: 3.7
- Rotational speed: 2850 RPM
-
- Clearance under the impeller: 0.5 mm
- Discharge connection: 1½"x1½"
- Max. liquid temperature: 35°C
- Operating mode: continuous
- Protection rating / insulation class: IPX8 / B
- Control: float switch (according to water level)
- Protection: against dry running (float), thermal protection (in the winding)
- Cooling: cooling jacket
Funding under the Mikroretencja 2026 program
The MULTI IP INOX submersible pump may form part of a rainwater management system covered by the nationwide “Mikroretencja” program (2026). The program is intended for owners of single-family homes and supports retaining and using rainwater on their own property—including tanks, pumps, filters, and infiltration systems. Learn more about the Mikroretencja program on our website.
IBO – 24 months (2 years) of the manufacturer's warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and water-management equipment with quality certificates.
Frequently asked questions (FAQ) – IBO MULTI IP INOX submersible pump
What is the MULTI IP INOX submersible pump used for?
MULTI IP INOX is a high-pressure submersible pump with a float switch, designed to supply homes with water, for watering, and for pumping clean water out of flooded rooms. The float controls the pump according to the water level. The pump delivers clean or slightly contaminated water.
How does the float switch work in MULTI IP INOX?
The float rises and falls with the water level, switching the pump on and off. When the water level drops too low, the float switches the pump off, protecting it from dry running. The minimum immersion level of the pump during operation is 25 cm.
How does MULTI IP INOX differ from the AUTO version?
MULTI IP INOX has a float switch that controls the pump according to the water level. The AUTO version has an electronic controller that responds to the opening and closing of a valve and maintains constant pressure. INOX is better suited to drawing and emptying water according to the level, while AUTO is better suited to supplying pressurized installations.
What type of water can be pumped with the MULTI IP pump?
The pump delivers clean or slightly contaminated water, including water containing chlorine. It is not suitable for water containing sand or abrasive particles, sewage, salt water, or oils. The maximum liquid temperature is 35°C.
Which MULTI IP INOX model should I choose?
The models differ in power (from 800 to 1200 W), head (up to 44 m), and output (up to 105 l/min). A more powerful model is selected when water demand is higher and the installation is taller. The choice should ideally be matched to the depth of the water source and the required pressure.
Where can I buy the IBO MULTI IP INOX pump?
As the manufacturer, we do not sell directly. The IBO MULTI IP INOX submersible pump can be purchased from our trade partners, plumbing wholesalers, and authorized online distributors. The model is selected according to the required head and water demand.
What is the warranty on the IBO MULTI IP pump?
IBO – 24 months (2 years) of the manufacturer's warranty. Dambat provides warranty and post-warranty service. For questions about model selection, it is best to contact an authorized distributor.
