Description
Multi DIVE 6-45 submersible pump
Multi DIVE 6-45 is a high-pressure submersible pump by IBO that serves as a central pressure unit. The built-in float switch turns the pump on and off depending on the water level and protects it against dry running. The pump handles raw, technically clean, or slightly contaminated water—for domestic water extraction and pumping, irrigation, and extracting rainwater from a tank.
Who is it for?
- Household users – extracting and pumping raw water as a central pressure unit.
- Allotment holders and gardeners – supplying irrigation systems and watering plants.
- Rainwater tank owners – extracting rainwater from a tank or cistern for use on the property.
- Installers – a pump with a float, automatic venting, and safety features, ready for installation in a tank.
Applications
Multi DIVE 6-45 is a central pressure unit for extracting and pumping raw water in households, irrigation systems, and rainwater harvesting systems. The pump is installed vertically in a well or tank, and the float switch turns it on and off depending on the water level. The pump handles clean or slightly contaminated water, including water containing chlorine.
When operating in rainwater systems, water flowing into the tank should be pre-filtered, and the pump should be suspended at least 30 cm above the bottom of the tank to protect it from sediment. Flowing water cools the motor, so the pump does not have to be completely submerged. The 230 V Multi DIVE 6-45 submersible pump is suitable for domestic water extraction and pumping, as well as irrigation. The pump is not a water treatment device—for other applications, we recommend ensuring appropriate water preparation.
Features of the Multi DIVE 6-45 submersible pump
Multi DIVE 6-45 is a high-pressure submersible pump with a float switch. The float controls the pump's operation according to the water level, and its position is adjusted by changing the length of the cable. The pump is protected against dry running and the effects of leaks—if there is a leak in the pressure hose or tap, the system switches to emergency mode.
The pump features automatic venting via a built-in vent valve and self-cooling using water flowing through the housing. The slim housing is made of plastic, while the cylinder is made of stainless steel. The motor has built-in thermal protection that switches the pump off in the event of an overload.
The shaft is made of AISI 304 stainless steel, the impeller of PPO polymer, and the mechanical seal uses a SiC/graphite/NBR configuration. The pump has a power rating of 750 W, a delivery head of up to 45 m, and a capacity of up to 115 l/min. It pumps clean or slightly contaminated water without abrasive elements such as sand.
- Type: high-pressure submersible pump with a float switch
- Motor power: 750 W
- Max. delivery head: 45 m
- Max. capacity: 115 l/min
- Power supply: 230 V / 50 Hz
- Current consumption: 5.5 A
- Capacitor: 30 µF
- Rotational speed: 2850 RPM
- Discharge connection: 1"
- Impeller passage: 1 mm (technically clean / slightly contaminated water)
- Max. immersion depth: 7 m
- Operating mode: continuous
- Protection rating / insulation class: IP68 / F
- Max. liquid temperature: 35°C
- Control: adjustable float switch
- Protections: against dry running, leakage, and thermal overload (in the winding)
- Venting: automatic (vent valve)
- Cooling: self-cooling with flowing water
- Power cable length: 10 m
- Materials: plastic housing + AISI 304 cylinder, AISI 304 shaft, PPO polymer impeller, SiC/graphite/NBR mechanical seal
Funding under the Mikroretencja 2026 program
The Multi DIVE 6-45 submersible pump can be part of a rainwater management system covered by the nationwide “Mikroretencja” (2026) program. The program is aimed at owners of single-family homes and supports collecting and using rainwater on their own properties, including tanks, pumps, filters, and infiltration systems. Learn more about the Mikroretencja program on our website.
IBO – 24-month (2-year) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – IBO Multi DIVE 6-45 submersible pump
What is the Multi DIVE 6-45 submersible pump used for?
The Multi DIVE 6-45 is a high-pressure submersible pump that serves as a central pressure unit. It is used to draw and pump raw water in households, for irrigation, and to draw water from rainwater tanks. It pumps clean or slightly contaminated water.
How does the float switch work in the Multi DIVE 6-45?
The built-in float switch turns the pump on and off depending on the water level, which is adjusted by the length of the float cable. When the water level drops too low, the pump switches off, protecting it from dry running.
Is the Multi DIVE 6-45 suitable for rainwater?
Yes, the pump is intended, among other uses, for rainwater collection systems. However, water flowing into the tank should be pre-filtered, and the pump should be suspended at least 30 cm above the bottom of the tank so that sediment and sand do not damage the hydraulic components.
What type of water can be pumped with the Multi DIVE pump?
The pump handles clean or slightly contaminated water, including water containing chlorine. It is not suitable for water containing sand or abrasive particles, sewage, salt water, corrosive water, or oil. The impeller passage is 1 mm, and the maximum liquid temperature is 35°C.
How deep can the pump be submerged?
The maximum pump immersion depth is 7 m. For the pump to prime, it must be submerged at least 100 mm, while it should hang at least 30 cm above the bottom of the tank. Use a rope, not the power cable, to lower and raise the pump.
Where can the Multi DIVE 6-45 IBO pump be purchased?
As the manufacturer, we do not sell directly. The IBO Multi DIVE 6-45 submersible pump can be purchased from our trade partners, plumbing wholesalers, and authorized online distributors. Pump selection should preferably be consulted based on the required head and the type of water intake.
What is the warranty on the Multi DIVE 6-45 IBO pump?
IBO – 24 months (2 years) of the manufacturer's warranty. Dambat provides warranty and post-warranty service. For questions about selection, it is best to contact an authorized distributor.
- Lift: 45.0 m,
- Capacity: 115.0 l/min.,
- Power: 0.75 kW,
- Power supply: 1~230 V,
- Current: 5.5 A,
- Frequency: 50 Hz,
- Motor speed: 2850 rpm,
- Insulation class: F,
- Operating mode: continuous,
- Protection rating: IP68,
- Impeller type: ,
- Particle size: mm,
- Connection [DN/cale]: 1,
- Discharge direction: ,
- Built-in float switch/probe: ,
- Operating position: Vertical,
- Power cable length: m,
- Length/height/width: mm,
- Weight: 15.2 kg,
Download: Karta_Multi_Dive_6-45.pdf
Download: GARAN_Prawny_obowiazek_zapewnienia_zgodnosci_towaru_z_umowa.pdf
Multi DIVE 6-45 submersible pump
Multi DIVE 6-45 is a high-pressure submersible pump by IBO that serves as a central pressure unit. The built-in float switch turns the pump on and off depending on the water level and protects it against dry running. The pump handles raw, technically clean, or slightly contaminated water—for domestic water extraction and pumping, irrigation, and extracting rainwater from a tank.
Who is it for?
- Household users – extracting and pumping raw water as a central pressure unit.
- Allotment holders and gardeners – supplying irrigation systems and watering plants.
- Rainwater tank owners – extracting rainwater from a tank or cistern for use on the property.
- Installers – a pump with a float, automatic venting, and safety features, ready for installation in a tank.
Applications
Multi DIVE 6-45 is a central pressure unit for extracting and pumping raw water in households, irrigation systems, and rainwater harvesting systems. The pump is installed vertically in a well or tank, and the float switch turns it on and off depending on the water level. The pump handles clean or slightly contaminated water, including water containing chlorine.
When operating in rainwater systems, water flowing into the tank should be pre-filtered, and the pump should be suspended at least 30 cm above the bottom of the tank to protect it from sediment. Flowing water cools the motor, so the pump does not have to be completely submerged. The 230 V Multi DIVE 6-45 submersible pump is suitable for domestic water extraction and pumping, as well as irrigation. The pump is not a water treatment device—for other applications, we recommend ensuring appropriate water preparation.
Features of the Multi DIVE 6-45 submersible pump
Multi DIVE 6-45 is a high-pressure submersible pump with a float switch. The float controls the pump's operation according to the water level, and its position is adjusted by changing the length of the cable. The pump is protected against dry running and the effects of leaks—if there is a leak in the pressure hose or tap, the system switches to emergency mode.
The pump features automatic venting via a built-in vent valve and self-cooling using water flowing through the housing. The slim housing is made of plastic, while the cylinder is made of stainless steel. The motor has built-in thermal protection that switches the pump off in the event of an overload.
The shaft is made of AISI 304 stainless steel, the impeller of PPO polymer, and the mechanical seal uses a SiC/graphite/NBR configuration. The pump has a power rating of 750 W, a delivery head of up to 45 m, and a capacity of up to 115 l/min. It pumps clean or slightly contaminated water without abrasive elements such as sand.
- Type: high-pressure submersible pump with a float switch
- Motor power: 750 W
- Max. delivery head: 45 m
- Max. capacity: 115 l/min
- Power supply: 230 V / 50 Hz
- Current consumption: 5.5 A
- Capacitor: 30 µF
- Rotational speed: 2850 RPM
- Discharge connection: 1"
- Impeller passage: 1 mm (technically clean / slightly contaminated water)
- Max. immersion depth: 7 m
- Operating mode: continuous
- Protection rating / insulation class: IP68 / F
- Max. liquid temperature: 35°C
- Control: adjustable float switch
- Protections: against dry running, leakage, and thermal overload (in the winding)
- Venting: automatic (vent valve)
- Cooling: self-cooling with flowing water
- Power cable length: 10 m
- Materials: plastic housing + AISI 304 cylinder, AISI 304 shaft, PPO polymer impeller, SiC/graphite/NBR mechanical seal
Funding under the Mikroretencja 2026 program
The Multi DIVE 6-45 submersible pump can be part of a rainwater management system covered by the nationwide “Mikroretencja” (2026) program. The program is aimed at owners of single-family homes and supports collecting and using rainwater on their own properties, including tanks, pumps, filters, and infiltration systems. Learn more about the Mikroretencja program on our website.
IBO – 24-month (2-year) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – IBO Multi DIVE 6-45 submersible pump
What is the Multi DIVE 6-45 submersible pump used for?
The Multi DIVE 6-45 is a high-pressure submersible pump that serves as a central pressure unit. It is used to draw and pump raw water in households, for irrigation, and to draw water from rainwater tanks. It pumps clean or slightly contaminated water.
How does the float switch work in the Multi DIVE 6-45?
The built-in float switch turns the pump on and off depending on the water level, which is adjusted by the length of the float cable. When the water level drops too low, the pump switches off, protecting it from dry running.
Is the Multi DIVE 6-45 suitable for rainwater?
Yes, the pump is intended, among other uses, for rainwater collection systems. However, water flowing into the tank should be pre-filtered, and the pump should be suspended at least 30 cm above the bottom of the tank so that sediment and sand do not damage the hydraulic components.
What type of water can be pumped with the Multi DIVE pump?
The pump handles clean or slightly contaminated water, including water containing chlorine. It is not suitable for water containing sand or abrasive particles, sewage, salt water, corrosive water, or oil. The impeller passage is 1 mm, and the maximum liquid temperature is 35°C.
How deep can the pump be submerged?
The maximum pump immersion depth is 7 m. For the pump to prime, it must be submerged at least 100 mm, while it should hang at least 30 cm above the bottom of the tank. Use a rope, not the power cable, to lower and raise the pump.
Where can the Multi DIVE 6-45 IBO pump be purchased?
As the manufacturer, we do not sell directly. The IBO Multi DIVE 6-45 submersible pump can be purchased from our trade partners, plumbing wholesalers, and authorized online distributors. Pump selection should preferably be consulted based on the required head and the type of water intake.
What is the warranty on the Multi DIVE 6-45 IBO pump?
IBO – 24 months (2 years) of the manufacturer's warranty. Dambat provides warranty and post-warranty service. For questions about selection, it is best to contact an authorized distributor.