MIX 2 UNI CONTROL NB GZs DN25
The IBO MIX 2 UNI CONTROL zone valve is a 3-way ball valve supplied complete with an electric actuator. Its purpose is to automatically direct the flow of the medium in heating, water and air-conditioning systems, as well as in heat pump systems. It can serve as a diverting valve or a valve for switching between circuits, making it suitable for many different automation configurations.
Who is it for?
- Central heating installers and plumbers – the actuator is ready to operate immediately after connection and automatically recognizes the operating mode.
- Heat pump installers – the valve works well as an element for switching circuits in heat pump systems.
- Designers and mechanics – support for 2-point and 3-point control allows it to be used in various systems that control the installation automatically.
- Service technicians – manual mode and maintaining the last position in the event of a power failure facilitate ongoing servicing.
Application
The MIX 2 UNI CONTROL zone valve is used wherever the flow of the medium needs to be directed automatically. It is most often used in heating, water and air-conditioning systems. It also performs well in systems with heat pumps, where it switches the circuit between two directions.
The series includes two connection versions – with female threads (GW) and with male threads and union halves (GZs) – in several sizes. This makes it easy to match the valve to a specific installation connection point. The MIX 2 UNI CONTROL 230 V zone valve with actuator works with controllers operating in 2-point or 3-point mode.
Features of MIX 2 UNI CONTROL
The entire IBO MIX 2 UNI CONTROL series is based on a CW617N brass body, with the ball and stem made of the same alloy. This durable solution withstands operation under pressure and at the elevated temperatures typical of heating systems.
Each valve is supplied together with an electric actuator powered by 230 V. The actuator automatically recognizes whether it has been connected in 2-point or 3-point mode. If necessary, it can be switched to manual mode and the valve position can be set using the knob; if the power supply fails, the valve remains in its last position.
- Type: 3-way ball valve with actuator
- Body and ball material: CW617N brass
- Actuator power supply: 230 V
- Control: 2-point (2P) / 3-point (3P)
- Connection: GZs (male thread with union halves)
IBO – 24 months (2 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – what is the MIX 2 UNI CONTROL zone valve used for?
What is the MIX 2 UNI CONTROL zone valve used for?
The MIX 2 UNI CONTROL zone valve is used to automatically direct the flow of water or heating medium wherever the installation needs to be divided into zones or the circuit needs to be switched between two directions. It is a 3-way ball valve with a control actuator, most commonly used in zone heating, heat pump systems, and ventilation and air-conditioning systems. By operating as a diverting or change-over valve, one component can handle many typical heating automation tasks.
What is the difference between 2-point and 3-point control?
In 2-point mode (2P), the valve operates like a switch: without a signal, it remains in the AB-B position; when voltage is applied, it moves to the other end position and returns when the voltage is disconnected. In 3-point mode (3P), the direction of rotation is determined by two separate signals, while the absence of voltage stops the actuator in its current position. The mode is recognized automatically based on the connection method.
What is the difference between the GW and GZs versions?
The GW version has female threads, while the GZs version has male threads equipped with union halves that facilitate installation and removal from the system. Both versions are available in several sizes; the choice depends on the configuration of the connection point.
Can the MIX 2 UNI CONTROL valve be operated manually?
Yes. After pressing and holding the mode-change button, you can turn the knob and manually change the position of the valve ball. When the button is released, the actuator returns to automatic operation. In the event of a power failure, the valve remains in its last position.
Is the MIX 2 UNI CONTROL valve covered by the manufacturer’s warranty?
IBO – 24 months (2 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Where can the MIX 2 UNI CONTROL zone valve be purchased?
As the manufacturer, we do not sell directly. The MIX 2 UNI CONTROL zone valve is available from our trading partners, installation wholesalers and authorized online distributors.
