Description
As a brand manufacturer IBO we design our devices to ensure safe and predictable operation in water and heating installations. Shut-off valve with actuator IBO MIX 1 UNI CONTROL is a zone ball valve designed to automatically close the medium supply, compatible with water, heating, air conditioning and ventilation installations, as well as heat pump systems and water leakage control systems.
For whom
- HVAC installers – we make it easier to select a zone valve thanks to clear parameters (DN15–DN25, K.V.S, maximum pressures and temperatures) and flexible control options 2P/3P in one actuator.
- Designers of water and heating installations - we enable precise control of zones and circuits in water, glycol and heat pump systems.
- Service companies – we ensure simple installation without tools, the ability to manually control the actuator and clear procedures for diagnosing faults.
- Operators of water leakage control systems - we offer a zone valve that can cooperate with automation systems to quickly cut off the medium supply.
- Manufacturers and integrators of automation systems – control signal 2-wire/3-wire in one increases compatibility with various regulators and controllers.
Application
- Water and heating installations in residential buildings and commercial facilities where zone shut-off of water or glycol solution is required.
- Air conditioning and ventilation systems with chilled water or other liquid media, requiring precise flow control in individual sections.
- Heat pump systems and glycol installations (up to 50% concentrations) where safe closing and opening of circuits is important.
- Water leakage control systems where the valve IBO MIX 1 UNI CONTROL performs automatic cut-off of the medium after a signal from the sensors.
- Building automation systems using control 2-point or 3-point to manage flow in installation zones.
Features, description and technical data
Zone valve IBO MIX 1 UNI CONTROL is a shut-off valve with an electric actuator, designed to close the medium supply in water, heating, air conditioning and ventilation installations, as well as in heat pump systems and water leakage control systems. The valve is supplied complete with an electric controller (actuator), which enables automatic operation in accordance with the needs of the associated device or regulator to which it is connected.
The actuator control signal is available in a single housing configuration 2-wire and 3-wire (2P/3P), thanks to which the installer can select a control method appropriate for a given application or control system. The actuator automatically recognizes the type of cable connection. In the control version 2-point Two varieties are available: NO (normally open) and NC (normally closed), which determine the valve position in the absence of a control signal. During normal operation, the valve always requires power.
The actuator mechanism also allows for manual control - just press the switch button to unlock the ability to rotate the knob and change the position of the valve ball; releasing the button automatically returns to automatic mode. The ergonomic shape of the knob ensures comfortable operation, and the design of the actuator protects it against automatic disconnection from the valve. Maximum differential pressure for the valve MIX 1 is 600 kPa (6 bar).
Actuator HELM OF 1 UNI is powered by voltage 230V/50Hz, has a degree of protection IP54, ambient temperature range 0–60°C and power cord 3 × 0.75 mm about length 100 cm. The turnover time is 20 pp at the rotation angle 90°, the housing is made of material PC+10%GF, and the engine torque is 6 Nm.
Valve MIX 1 UNI characterized by maximum working pressure 32 bar (3.2 MPa) and maximum operating temperature 120°C, with the permissible glycol concentration up to 50%. The maximum differential pressure is 6 bar (0.6 MPa). Coefficients K.V.S for individual diameters are: DN15 (½”) – 20 m³/h, DN20 (¾”) – 45 m³/h, DN25 (1”) – 60 m³/h. The valve body and ball/shaft are made of brass Brass EN 12165, CW617N, and the valve thread is internal thread (Rp).
Dimensions of selected valve versions IBO MIX 1 UNI C are respectively: DN15 – L = 62 mm, H = 104 mm; DN20 – L = 68 mm, H = 110 mm; DN25 – L = 81 mm, H = 113 mm. The actuator is mounted on the valve quickly, without the use of tools - press the actuator against the valve, and disassembly is done by pulling it out with appropriate force. Installation is only possible in one correct position.
The manual also includes a description of the electrical connections for the control 2-point (NC/NO) and 3-point, along with terminal designations (C, N, L, L1) and wire colors (BK, BU, BR) and a description of the directions of rotation when supplying the phase to the appropriate terminals. For safety reasons, all assembly, service and electrical connection works may only be performed by persons with appropriate electrical installation and sanitary qualifications, in compliance with applicable regulations.
As a manufacturer, Dambat declares the compatibility of the shut-off valve with the actuator IBO MIX 1 UNI CONTROL with the relevant EU directives (LVD, EMC, RoHS) and the harmonized standards indicated in the declaration of conformity, available together with the full device manual on the website.
Content compiled from general data. Contact us for details.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – what is the IBO MIX 1 UNI CONTROL shut-off valve with actuator used for?
What is the IBO MIX 1 UNI CONTROL shut-off valve with actuator used for?
As a brand manufacturer IBO we design a zone valve IBO MIX 1 UNI CONTROL for closing the flow of the medium in water, heating, air conditioning and ventilation installations, as well as in heat pump systems and water leakage control systems. The device should only be used under the conditions specified in the Dambat technical documentation.
Where can I buy the IBO MIX 1 UNI CONTROL shut-off valve manufactured by Dambat?
As a manufacturer, we do not sell directly online. Shut-off valve with actuator IBO MIX 1 UNI CONTROL is available from our trading partners, installation wholesalers and authorized online distributors cooperating with Dambat. Content compiled from general data. Contact us for details.
What is the difference between IBO MIX 1 UNI CONTROL in the NO version and the NC version?
Version NO (normally open) means that in the absence of a control signal, the valve remains open, while version NC (normally closed) – that in the absence of a signal, the valve remains closed. In both cases, the valve requires power supply during normal operation, and the choice of version depends on the installation requirements and system operation logic.
How does 2-point and 3-point control work in the IBO MIX 1 UNI CONTROL actuator?
Actuator IBO MIX 1 UNI CONTROL supports control in one device 2-wire (2P) i 3-wire (3P), recognizing how the wires are connected. 2-point control uses a control terminal C and Power supply, while in 3-point control, the direction of rotation of the valve ball is achieved by applying a phase to the appropriate terminal L1 for opening or closing, with a common neutral wire.
What are the basic operating parameters of the IBO MIX 1 UNI CONTROL valve?
Valve MIX 1 UNI characterized by maximum working pressure 32 bar, maximum differential pressure 6 bar, maximum operating temperature 120°C and the permissible glycol concentration up to 50%. Values K.V.S are respectively: 20 m³/h for DN15, 45 m³/h for DN20 and 60 m³/h for DN25, which should be taken into account when selecting a specific installation.
How to properly install and service the IBO MIX 1 UNI CONTROL valve?
The actuator is mounted without tools by pressing it against the valve and dismantled by pulling it out; the actuator can only be mounted in one correct position. All assembly, service and electrical work may only be performed by persons with appropriate authorizations, with the power supply disconnected and in compliance with the safety rules described in the manual.
Does the IBO MIX 1 UNI CONTROL valve require periodic maintenance?
If the valve does not change position for a long time (over 3 months), we recommend closing and opening the valve manually to remove any deposits on the valve ball. In the event of unusual operation of the actuator, check the correctness of connections, supply voltage and the mechanical condition of the stem, and, if necessary, perform maintenance activities described in the manual.
- Lifting: m,
- Performance: 1000.0 l/min.,
- Suction capacity: m,
- Power: kW,
- Power supply: ,
- Frequency: 50 Hz,
- Power consumption: Oh,
- Motor Speed: rpm ,
- Dimensions: 140/112/65 mm
- Weight: 0.9 kg,
As a brand manufacturer IBO we design our devices to ensure safe and predictable operation in water and heating installations. Shut-off valve with actuator IBO MIX 1 UNI CONTROL is a zone ball valve designed to automatically close the medium supply, compatible with water, heating, air conditioning and ventilation installations, as well as heat pump systems and water leakage control systems.
For whom
- HVAC installers – we make it easier to select a zone valve thanks to clear parameters (DN15–DN25, K.V.S, maximum pressures and temperatures) and flexible control options 2P/3P in one actuator.
- Designers of water and heating installations - we enable precise control of zones and circuits in water, glycol and heat pump systems.
- Service companies – we ensure simple installation without tools, the ability to manually control the actuator and clear procedures for diagnosing faults.
- Operators of water leakage control systems - we offer a zone valve that can cooperate with automation systems to quickly cut off the medium supply.
- Manufacturers and integrators of automation systems – control signal 2-wire/3-wire in one increases compatibility with various regulators and controllers.
Application
- Water and heating installations in residential buildings and commercial facilities where zone shut-off of water or glycol solution is required.
- Air conditioning and ventilation systems with chilled water or other liquid media, requiring precise flow control in individual sections.
- Heat pump systems and glycol installations (up to 50% concentrations) where safe closing and opening of circuits is important.
- Water leakage control systems where the valve IBO MIX 1 UNI CONTROL performs automatic cut-off of the medium after a signal from the sensors.
- Building automation systems using control 2-point or 3-point to manage flow in installation zones.
Features, description and technical data
Zone valve IBO MIX 1 UNI CONTROL is a shut-off valve with an electric actuator, designed to close the medium supply in water, heating, air conditioning and ventilation installations, as well as in heat pump systems and water leakage control systems. The valve is supplied complete with an electric controller (actuator), which enables automatic operation in accordance with the needs of the associated device or regulator to which it is connected.
The actuator control signal is available in a single housing configuration 2-wire and 3-wire (2P/3P), thanks to which the installer can select a control method appropriate for a given application or control system. The actuator automatically recognizes the type of cable connection. In the control version 2-point Two varieties are available: NO (normally open) and NC (normally closed), which determine the valve position in the absence of a control signal. During normal operation, the valve always requires power.
The actuator mechanism also allows for manual control - just press the switch button to unlock the ability to rotate the knob and change the position of the valve ball; releasing the button automatically returns to automatic mode. The ergonomic shape of the knob ensures comfortable operation, and the design of the actuator protects it against automatic disconnection from the valve. Maximum differential pressure for the valve MIX 1 is 600 kPa (6 bar).
Actuator HELM OF 1 UNI is powered by voltage 230V/50Hz, has a degree of protection IP54, ambient temperature range 0–60°C and power cord 3 × 0.75 mm about length 100 cm. The turnover time is 20 pp at the rotation angle 90°, the housing is made of material PC+10%GF, and the engine torque is 6 Nm.
Valve MIX 1 UNI characterized by maximum working pressure 32 bar (3.2 MPa) and maximum operating temperature 120°C, with the permissible glycol concentration up to 50%. The maximum differential pressure is 6 bar (0.6 MPa). Coefficients K.V.S for individual diameters are: DN15 (½”) – 20 m³/h, DN20 (¾”) – 45 m³/h, DN25 (1”) – 60 m³/h. The valve body and ball/shaft are made of brass Brass EN 12165, CW617N, and the valve thread is internal thread (Rp).
Dimensions of selected valve versions IBO MIX 1 UNI C are respectively: DN15 – L = 62 mm, H = 104 mm; DN20 – L = 68 mm, H = 110 mm; DN25 – L = 81 mm, H = 113 mm. The actuator is mounted on the valve quickly, without the use of tools - press the actuator against the valve, and disassembly is done by pulling it out with appropriate force. Installation is only possible in one correct position.
The manual also includes a description of the electrical connections for the control 2-point (NC/NO) and 3-point, along with terminal designations (C, N, L, L1) and wire colors (BK, BU, BR) and a description of the directions of rotation when supplying the phase to the appropriate terminals. For safety reasons, all assembly, service and electrical connection works may only be performed by persons with appropriate electrical installation and sanitary qualifications, in compliance with applicable regulations.
As a manufacturer, Dambat declares the compatibility of the shut-off valve with the actuator IBO MIX 1 UNI CONTROL with the relevant EU directives (LVD, EMC, RoHS) and the harmonized standards indicated in the declaration of conformity, available together with the full device manual on the website.
Content compiled from general data. Contact us for details.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – what is the IBO MIX 1 UNI CONTROL shut-off valve with actuator used for?
What is the IBO MIX 1 UNI CONTROL shut-off valve with actuator used for?
As a brand manufacturer IBO we design a zone valve IBO MIX 1 UNI CONTROL for closing the flow of the medium in water, heating, air conditioning and ventilation installations, as well as in heat pump systems and water leakage control systems. The device should only be used under the conditions specified in the Dambat technical documentation.
Where can I buy the IBO MIX 1 UNI CONTROL shut-off valve manufactured by Dambat?
As a manufacturer, we do not sell directly online. Shut-off valve with actuator IBO MIX 1 UNI CONTROL is available from our trading partners, installation wholesalers and authorized online distributors cooperating with Dambat. Content compiled from general data. Contact us for details.
What is the difference between IBO MIX 1 UNI CONTROL in the NO version and the NC version?
Version NO (normally open) means that in the absence of a control signal, the valve remains open, while version NC (normally closed) – that in the absence of a signal, the valve remains closed. In both cases, the valve requires power supply during normal operation, and the choice of version depends on the installation requirements and system operation logic.
How does 2-point and 3-point control work in the IBO MIX 1 UNI CONTROL actuator?
Actuator IBO MIX 1 UNI CONTROL supports control in one device 2-wire (2P) i 3-wire (3P), recognizing how the wires are connected. 2-point control uses a control terminal C and Power supply, while in 3-point control, the direction of rotation of the valve ball is achieved by applying a phase to the appropriate terminal L1 for opening or closing, with a common neutral wire.
What are the basic operating parameters of the IBO MIX 1 UNI CONTROL valve?
Valve MIX 1 UNI characterized by maximum working pressure 32 bar, maximum differential pressure 6 bar, maximum operating temperature 120°C and the permissible glycol concentration up to 50%. Values K.V.S are respectively: 20 m³/h for DN15, 45 m³/h for DN20 and 60 m³/h for DN25, which should be taken into account when selecting a specific installation.
How to properly install and service the IBO MIX 1 UNI CONTROL valve?
The actuator is mounted without tools by pressing it against the valve and dismantled by pulling it out; the actuator can only be mounted in one correct position. All assembly, service and electrical work may only be performed by persons with appropriate authorizations, with the power supply disconnected and in compliance with the safety rules described in the manual.
Does the IBO MIX 1 UNI CONTROL valve require periodic maintenance?
If the valve does not change position for a long time (over 3 months), we recommend closing and opening the valve manually to remove any deposits on the valve ball. In the event of unusual operation of the actuator, check the correctness of connections, supply voltage and the mechanical condition of the stem, and, if necessary, perform maintenance activities described in the manual.
