Description
As the manufacturer of the IBO brand, we design our devices to ensure safe and predictable operation in water and heating systems. The IBO MIX 1 UNI CONTROL motorized shut-off valve is a zone ball valve designed to automatically shut off the flow of the medium. It is suitable for water, heating, air-conditioning, ventilation, heat pump, and water leak control systems.
Who it is for
- HVAC installers – we make it easier to select a zone valve with clear parameters (DN15–DN25, KVS, maximum pressures and temperatures) and flexible 2P/3P control options in a single actuator.
- Water and heating system designers – we enable precise control of zones and circuits in systems using water, glycol, and heat pump systems.
- Service companies – we provide simple installation without tools, the option of manual actuator control, and clear fault-diagnosis procedures.
- Water leak control system operators – we offer a zone valve that can work with automation systems to quickly shut off the medium supply.
- Manufacturers and integrators of automation systems – the 2-wire/3-wire control signal in a single unit increases compatibility with various regulators and controllers.
Applications
- Water and heating systems in residential and commercial buildings where zone shut-off of the water or glycol solution supply is required.
- Air-conditioning and ventilation systems using chilled water or another liquid medium that require precise flow control in individual sections.
- Heat pump systems and glycol systems (up to 50% concentration) where safe closing and opening of circuits is important.
- Water leak control systems, where the IBO MIX 1 UNI CONTROL valve automatically shuts off the medium after receiving a signal from sensors.
- Building automation systems using 2-point or 3-point control to manage flow in system zones.
Features, description, and technical data
The IBO MIX 1 UNI CONTROL zone valve is a motorized shut-off valve designed to close the flow of the medium in water, heating, air-conditioning, and ventilation systems, as well as in heat pump systems and water leak control systems. The valve is supplied complete with an electric controller (actuator), enabling automatic operation according to the requirements of the connected device or regulator.
The actuator’s control signal is available in a single housing in both 2-wire and 3-wire (2P/3P) configurations, allowing the installer to select the control method appropriate for the application or control system. The actuator automatically recognizes the type of wire connection. In 2-point control mode, two variants are available: NO (normally open) and NC (normally closed), which determine the valve position when there is no control signal. During normal operation, the valve always requires a power supply.
The actuator mechanism also allows manual control – simply press the switch button to unlock the knob, allowing the valve ball to be rotated and its position changed; releasing the button automatically restores automatic mode. The ergonomic knob shape ensures convenient operation, while the actuator design protects it against accidental detachment from the valve. The maximum differential pressure for the MIX 1 valve is 600 kPa (6 bar).
The STER Z 1 UNI actuator is powered by 230 V / 50 Hz, has an IP54 protection rating, an ambient temperature range of 0–60°C, and a 3 × 0.75 mm power cable measuring 100 cm in length. The rotation time is 20 s at a rotation angle of 90°; the housing is made of PC+10%GF, and the motor torque is 6 Nm.
The MIX 1 UNI valve has a maximum operating pressure of 32 bar (3.2 MPa) and a maximum operating temperature of 120°C, with an allowable glycol concentration of up to 50%. The maximum differential pressure is 6 bar (0.6 MPa). The KVS values for the individual diameters are: DN15 (½”) – 20 m³/h, DN20 (¾”) – 45 m³/h, DN25 (1”) – 60 m³/h. The valve body and the ball/stem are made of Brass EN 12165, CW617N, and the valve thread is an internal thread (Rp).
The dimensions of the selected IBO MIX 1 UNI C valve versions are: DN15 – L = 62 mm, H = 104 mm; DN20 – L = 68 mm, H = 110 mm; DN25 – L = 81 mm, H = 113 mm. The actuator is installed on the valve quickly and without tools – press the actuator onto the valve; removal is performed by pulling it off with appropriate force. Installation is possible in only one correct position.
The instructions also include a description of the electrical connections for 2-point (NC/NO) and 3-point control, together with terminal markings (C, N, L, L1), wire colors (BK, BU, BR), and a description of the rotation directions when the phase is applied to the appropriate terminals. For safety reasons, all installation, servicing, and electrical connection work may be carried out only by persons with the appropriate electrical and sanitary qualifications, in compliance with applicable regulations.
As the manufacturer, Dambat declares that the IBO MIX 1 UNI CONTROL motorized shut-off valve complies with the relevant EU directives (LVD, EMC, RoHS) and the harmonized standards indicated in the declaration of conformity, available together with the complete device manual on the website.
Content prepared on the basis of general data. Contact us for details.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – what is the purpose of the IBO MIX 1 UNI CONTROL motorized shut-off valve?
What is the purpose of the IBO MIX 1 UNI CONTROL motorized shut-off valve?
As the manufacturer of the IBO brand, we design the IBO MIX 1 UNI CONTROL zone valve to shut off the flow of the medium in water, heating, air-conditioning, and ventilation systems, as well as in heat pump systems and water leak control systems. The device should be used only under the conditions specified in Dambat’s technical documentation.
Where can I buy the IBO MIX 1 UNI CONTROL shut-off valve manufactured by Dambat?
As the manufacturer, we do not sell directly online. The IBO MIX 1 UNI CONTROL motorized shut-off valve is available from our trade partners, installation wholesalers, and authorized online distributors working with Dambat. Content prepared on the basis of general data. Contact us for details.
What is the difference between the NO and NC versions of the IBO MIX 1 UNI CONTROL?
The NO version (normally open) means that the valve remains open when there is no control signal, while the NC version (normally closed) means that the valve remains closed when there is no signal. In both cases, the valve requires a power supply during normal operation, and the choice of version depends on the system requirements and operating logic.
How does 2-point and 3-point control work in the IBO MIX 1 UNI CONTROL actuator?
The IBO MIX 1 UNI CONTROL actuator supports both 2-wire (2P) and 3-wire (3P) control in a single device, automatically recognizing the wire connection method. In 2-point control, the C control terminal and the power supply are used, while in 3-point control, the valve ball’s direction of rotation is controlled by applying the phase to the appropriate L1 terminal for opening or closing, with a common neutral wire.
What are the basic operating parameters of the IBO MIX 1 UNI CONTROL valve?
The MIX 1 UNI valve has a maximum operating pressure of 32 bar, a maximum differential pressure of 6 bar, a maximum operating temperature of 120°C, and an allowable glycol concentration of up to 50%. The KVS values are: 20 m³/h for DN15, 45 m³/h for DN20, and 60 m³/h for DN25, which should be taken into account when selecting the valve for a specific system.
How should the IBO MIX 1 UNI CONTROL valve be installed and serviced?
The actuator is installed without tools by pressing it onto the valve, and removed by pulling it off; the actuator can be installed in only one correct position. All installation, servicing, and electrical work may be carried out only by appropriately qualified persons, with the power disconnected and in accordance with the safety rules described in the instructions.
Does the IBO MIX 1 UNI CONTROL valve require periodic maintenance?
If the valve does not change position for an extended period (more than 3 months), we recommend manually closing and opening it to remove any possible deposits from the valve ball. In the event of unusual actuator operation, check the connections, supply voltage, and mechanical condition of the stem and, if necessary, perform the maintenance procedures described in the instructions.
- Power: kW,
- Power supply: 1~230 V,
- Frequency: 50 Hz,
- Current draw: A,
- Motor speed: rpm,
- Dimensions: 133/107/65 mm
- Weight: 0.6 kg,
As the manufacturer of the IBO brand, we design our devices to ensure safe and predictable operation in water and heating systems. The IBO MIX 1 UNI CONTROL motorized shut-off valve is a zone ball valve designed to automatically shut off the flow of the medium. It is suitable for water, heating, air-conditioning, ventilation, heat pump, and water leak control systems.
Who it is for
- HVAC installers – we make it easier to select a zone valve with clear parameters (DN15–DN25, KVS, maximum pressures and temperatures) and flexible 2P/3P control options in a single actuator.
- Water and heating system designers – we enable precise control of zones and circuits in systems using water, glycol, and heat pump systems.
- Service companies – we provide simple installation without tools, the option of manual actuator control, and clear fault-diagnosis procedures.
- Water leak control system operators – we offer a zone valve that can work with automation systems to quickly shut off the medium supply.
- Manufacturers and integrators of automation systems – the 2-wire/3-wire control signal in a single unit increases compatibility with various regulators and controllers.
Applications
- Water and heating systems in residential and commercial buildings where zone shut-off of the water or glycol solution supply is required.
- Air-conditioning and ventilation systems using chilled water or another liquid medium that require precise flow control in individual sections.
- Heat pump systems and glycol systems (up to 50% concentration) where safe closing and opening of circuits is important.
- Water leak control systems, where the IBO MIX 1 UNI CONTROL valve automatically shuts off the medium after receiving a signal from sensors.
- Building automation systems using 2-point or 3-point control to manage flow in system zones.
Features, description, and technical data
The IBO MIX 1 UNI CONTROL zone valve is a motorized shut-off valve designed to close the flow of the medium in water, heating, air-conditioning, and ventilation systems, as well as in heat pump systems and water leak control systems. The valve is supplied complete with an electric controller (actuator), enabling automatic operation according to the requirements of the connected device or regulator.
The actuator’s control signal is available in a single housing in both 2-wire and 3-wire (2P/3P) configurations, allowing the installer to select the control method appropriate for the application or control system. The actuator automatically recognizes the type of wire connection. In 2-point control mode, two variants are available: NO (normally open) and NC (normally closed), which determine the valve position when there is no control signal. During normal operation, the valve always requires a power supply.
The actuator mechanism also allows manual control – simply press the switch button to unlock the knob, allowing the valve ball to be rotated and its position changed; releasing the button automatically restores automatic mode. The ergonomic knob shape ensures convenient operation, while the actuator design protects it against accidental detachment from the valve. The maximum differential pressure for the MIX 1 valve is 600 kPa (6 bar).
The STER Z 1 UNI actuator is powered by 230 V / 50 Hz, has an IP54 protection rating, an ambient temperature range of 0–60°C, and a 3 × 0.75 mm power cable measuring 100 cm in length. The rotation time is 20 s at a rotation angle of 90°; the housing is made of PC+10%GF, and the motor torque is 6 Nm.
The MIX 1 UNI valve has a maximum operating pressure of 32 bar (3.2 MPa) and a maximum operating temperature of 120°C, with an allowable glycol concentration of up to 50%. The maximum differential pressure is 6 bar (0.6 MPa). The KVS values for the individual diameters are: DN15 (½”) – 20 m³/h, DN20 (¾”) – 45 m³/h, DN25 (1”) – 60 m³/h. The valve body and the ball/stem are made of Brass EN 12165, CW617N, and the valve thread is an internal thread (Rp).
The dimensions of the selected IBO MIX 1 UNI C valve versions are: DN15 – L = 62 mm, H = 104 mm; DN20 – L = 68 mm, H = 110 mm; DN25 – L = 81 mm, H = 113 mm. The actuator is installed on the valve quickly and without tools – press the actuator onto the valve; removal is performed by pulling it off with appropriate force. Installation is possible in only one correct position.
The instructions also include a description of the electrical connections for 2-point (NC/NO) and 3-point control, together with terminal markings (C, N, L, L1), wire colors (BK, BU, BR), and a description of the rotation directions when the phase is applied to the appropriate terminals. For safety reasons, all installation, servicing, and electrical connection work may be carried out only by persons with the appropriate electrical and sanitary qualifications, in compliance with applicable regulations.
As the manufacturer, Dambat declares that the IBO MIX 1 UNI CONTROL motorized shut-off valve complies with the relevant EU directives (LVD, EMC, RoHS) and the harmonized standards indicated in the declaration of conformity, available together with the complete device manual on the website.
Content prepared on the basis of general data. Contact us for details.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – what is the purpose of the IBO MIX 1 UNI CONTROL motorized shut-off valve?
What is the purpose of the IBO MIX 1 UNI CONTROL motorized shut-off valve?
As the manufacturer of the IBO brand, we design the IBO MIX 1 UNI CONTROL zone valve to shut off the flow of the medium in water, heating, air-conditioning, and ventilation systems, as well as in heat pump systems and water leak control systems. The device should be used only under the conditions specified in Dambat’s technical documentation.
Where can I buy the IBO MIX 1 UNI CONTROL shut-off valve manufactured by Dambat?
As the manufacturer, we do not sell directly online. The IBO MIX 1 UNI CONTROL motorized shut-off valve is available from our trade partners, installation wholesalers, and authorized online distributors working with Dambat. Content prepared on the basis of general data. Contact us for details.
What is the difference between the NO and NC versions of the IBO MIX 1 UNI CONTROL?
The NO version (normally open) means that the valve remains open when there is no control signal, while the NC version (normally closed) means that the valve remains closed when there is no signal. In both cases, the valve requires a power supply during normal operation, and the choice of version depends on the system requirements and operating logic.
How does 2-point and 3-point control work in the IBO MIX 1 UNI CONTROL actuator?
The IBO MIX 1 UNI CONTROL actuator supports both 2-wire (2P) and 3-wire (3P) control in a single device, automatically recognizing the wire connection method. In 2-point control, the C control terminal and the power supply are used, while in 3-point control, the valve ball’s direction of rotation is controlled by applying the phase to the appropriate L1 terminal for opening or closing, with a common neutral wire.
What are the basic operating parameters of the IBO MIX 1 UNI CONTROL valve?
The MIX 1 UNI valve has a maximum operating pressure of 32 bar, a maximum differential pressure of 6 bar, a maximum operating temperature of 120°C, and an allowable glycol concentration of up to 50%. The KVS values are: 20 m³/h for DN15, 45 m³/h for DN20, and 60 m³/h for DN25, which should be taken into account when selecting the valve for a specific system.
How should the IBO MIX 1 UNI CONTROL valve be installed and serviced?
The actuator is installed without tools by pressing it onto the valve, and removed by pulling it off; the actuator can be installed in only one correct position. All installation, servicing, and electrical work may be carried out only by appropriately qualified persons, with the power disconnected and in accordance with the safety rules described in the instructions.
Does the IBO MIX 1 UNI CONTROL valve require periodic maintenance?
If the valve does not change position for an extended period (more than 3 months), we recommend manually closing and opening it to remove any possible deposits from the valve ball. In the event of unusual actuator operation, check the connections, supply voltage, and mechanical condition of the stem and, if necessary, perform the maintenance procedures described in the instructions.