Description
As the manufacturer of the IBO brand, we design our devices to ensure safe and predictable operation in water and heating systems. The IBO MIX 1 UNI CONTROL shut-off valve with actuator is a zone ball valve designed to automatically shut off the flow of the medium, compatible with water, heating, air-conditioning and ventilation systems, as well as heat pump systems and water leak detection systems.
Who it is for
- HVAC installers – we make it easier to select a zone valve thanks to clear parameters (DN15–DN25, KVS, maximum pressures and temperatures) and flexible 2P/3P control options in one actuator.
- Designers of water and heating systems – we enable precise control of zones and circuits in systems using water, glycol and heat pump systems.
- Service companies – we provide simple installation without tools, the option of manually controlling the actuator and clear fault-diagnosis procedures.
- Operators of water leak detection systems – we offer a zone valve that can work with automation systems for quickly shutting off the medium supply.
- Manufacturers and integrators of automation systems – the 2-wire/3-wire control signal in one unit increases compatibility with various controllers and control devices.
Application
- Water and heating systems in residential and commercial buildings where zone shut-off of the water or glycol solution supply is required.
- Air-conditioning and ventilation systems using chilled water or another liquid medium that require precise flow control in individual sections.
- Heat pump systems and glycol systems (up to 50% concentration) where safe closing and opening of circuits is important.
- Water leak detection systems, where the IBO MIX 1 UNI CONTROL valve automatically shuts off the medium after receiving a signal from sensors.
- Building automation systems using 2-point or 3-point control to manage flow in system zones.
Features, description and technical data
The IBO MIX 1 UNI CONTROL zone valve is a shut-off valve with an electric actuator, designed to shut off the flow of the medium in water, heating, air-conditioning and ventilation systems, as well as in heat pump systems and water leak detection systems. The valve is supplied complete with an electric controller (actuator), which enables automatic operation according to the requirements of the connected device or controller.
The actuator control signal is available in one housing in both a 2-wire and 3-wire (2P/3P) configuration, allowing the installer to select the control method appropriate for the given application or control system. The actuator automatically detects the type of wire connection. In the 2-point control version, two variants are available: NO (normally open) and NC (normally closed), which define the valve position when there is no control signal. During normal operation, the valve always requires a power supply.
The actuator mechanism also allows manual control – simply press the switch button to unlock the knob and change the position of the valve ball; releasing the button automatically restores automatic mode. The ergonomic knob provides convenient operation, while the actuator design prevents it from disconnecting from the valve on its own. The maximum differential pressure for the MIX 1 valve is 600 kPa (6 bar).
The STER Z 1 UNI actuator is powered by 230 V / 50 Hz, has an IP54 protection rating, an ambient temperature range of 0–60°C and a 3 × 0.75 mm power cable measuring 100 cm in length. The rotation time is 20 s at a rotation angle of 90°; the housing is made of PC+10%GF, and the motor torque is 6 Nm.
The MIX 1 UNI valve has a maximum working pressure of 32 bar (3.2 MPa) and a maximum operating temperature of 120°C, with a permitted glycol concentration of up to 50%. The maximum differential pressure is 6 bar (0.6 MPa). The KVS values for the individual diameters are: DN15 (½”) – 20 m³/h, DN20 (¾”) – 45 m³/h, DN25 (1”) – 60 m³/h. The valve body and ball/stem are made of Brass EN 12165, CW617N, and the valve thread is an internal thread (Rp).
The dimensions of selected versions of the IBO MIX 1 UNI C valve are: DN15 – L = 62 mm, H = 104 mm; DN20 – L = 68 mm, H = 110 mm; DN25 – L = 81 mm, H = 113 mm. The actuator is installed on the valve quickly and without tools – press the actuator onto the valve; removal is carried out by pulling it away with appropriate force. Installation is possible in only one correct position.
The instructions also include a description of the electrical connections for 2-point (NC/NO) and 3-point control, together with terminal markings (C, N, L, L1), wire colours (BK, BU, BR) and a description of the rotation directions when the phase is applied to the appropriate terminals. For safety reasons, all installation, servicing and electrical connection work may be carried out only by persons with the appropriate electrical and sanitary qualifications, in compliance with applicable regulations.
As the manufacturer, Dambat declares that the IBO MIX 1 UNI CONTROL shut-off valve with actuator complies with the relevant EU directives (LVD, EMC, RoHS) and the harmonised standards specified in the declaration of conformity, available together with the complete device manual on the website.
Content prepared on the basis of general data. Contact us for details.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – what is the IBO MIX 1 UNI CONTROL shut-off valve with actuator used for?
What is the IBO MIX 1 UNI CONTROL shut-off valve with actuator used for?
As the manufacturer of the IBO brand, we design the IBO MIX 1 UNI CONTROL zone valve to shut off the flow of the medium in water, heating, air-conditioning and ventilation systems, as well as in heat pump systems and water leak detection systems. The device should be used only under the conditions specified in Dambat’s technical documentation.
Where can I buy the IBO MIX 1 UNI CONTROL shut-off valve manufactured by Dambat?
As the manufacturer, we do not sell directly online. The IBO MIX 1 UNI CONTROL shut-off valve with actuator is available from our trade partners, installation wholesalers and authorised online distributors cooperating with Dambat. Content prepared on the basis of general data. Contact us for details.
What is the difference between the NO and NC versions of the IBO MIX 1 UNI CONTROL?
The NO version (normally open) means that the valve remains open when there is no control signal, whereas the NC version (normally closed) means that the valve remains closed when there is no signal. In both cases, the valve requires a power supply during normal operation, and the choice of version depends on the system requirements and operating logic.
How does 2-point and 3-point control work in the IBO MIX 1 UNI CONTROL actuator?
The IBO MIX 1 UNI CONTROL actuator supports both 2-wire (2P) and 3-wire (3P) control in one device, automatically recognising the wire connection method. In 2-point control, the C control terminal and the power supply are used, whereas in 3-point control, the direction of rotation of the valve ball is controlled by applying the phase to the appropriate L1 terminal for opening or closing, with a shared neutral wire.
What are the basic operating parameters of the IBO MIX 1 UNI CONTROL valve?
The MIX 1 UNI valve has a maximum working pressure of 32 bar, a maximum differential pressure of 6 bar, a maximum operating temperature of 120°C and a permitted glycol concentration of up to 50%. The KVS values are: 20 m³/h for DN15, 45 m³/h for DN20 and 60 m³/h for DN25, which should be taken into account when selecting the valve for a specific system.
How should the IBO MIX 1 UNI CONTROL valve be installed and serviced?
The actuator is installed without tools by pressing it onto the valve, and removed by pulling it away; the actuator can be installed in only one correct position. All installation, servicing and electrical work may be carried out only by appropriately qualified persons, with the power disconnected and in compliance with the safety rules described in the instructions.
Does the IBO MIX 1 UNI CONTROL valve require periodic maintenance?
If the valve does not change position for an extended period (more than 3 months), we recommend manually closing and opening the valve to remove any possible deposits from the valve ball. If the actuator operates abnormally, check the connections, supply voltage and the mechanical condition of the stem and, if necessary, carry out the maintenance procedures described in the instructions.
- Power: kW,
- Power supply: 1~230 V,
- Frequency: 50 Hz,
- Current draw: A,
- Motor speed: rpm,
- Dimensions: 123/105/65 mm
- Weight: 0.6 kg,
As the manufacturer of the IBO brand, we design our devices to ensure safe and predictable operation in water and heating systems. The IBO MIX 1 UNI CONTROL shut-off valve with actuator is a zone ball valve designed to automatically shut off the flow of the medium, compatible with water, heating, air-conditioning and ventilation systems, as well as heat pump systems and water leak detection systems.
Who it is for
- HVAC installers – we make it easier to select a zone valve thanks to clear parameters (DN15–DN25, KVS, maximum pressures and temperatures) and flexible 2P/3P control options in one actuator.
- Designers of water and heating systems – we enable precise control of zones and circuits in systems using water, glycol and heat pump systems.
- Service companies – we provide simple installation without tools, the option of manually controlling the actuator and clear fault-diagnosis procedures.
- Operators of water leak detection systems – we offer a zone valve that can work with automation systems for quickly shutting off the medium supply.
- Manufacturers and integrators of automation systems – the 2-wire/3-wire control signal in one unit increases compatibility with various controllers and control devices.
Application
- Water and heating systems in residential and commercial buildings where zone shut-off of the water or glycol solution supply is required.
- Air-conditioning and ventilation systems using chilled water or another liquid medium that require precise flow control in individual sections.
- Heat pump systems and glycol systems (up to 50% concentration) where safe closing and opening of circuits is important.
- Water leak detection systems, where the IBO MIX 1 UNI CONTROL valve automatically shuts off the medium after receiving a signal from sensors.
- Building automation systems using 2-point or 3-point control to manage flow in system zones.
Features, description and technical data
The IBO MIX 1 UNI CONTROL zone valve is a shut-off valve with an electric actuator, designed to shut off the flow of the medium in water, heating, air-conditioning and ventilation systems, as well as in heat pump systems and water leak detection systems. The valve is supplied complete with an electric controller (actuator), which enables automatic operation according to the requirements of the connected device or controller.
The actuator control signal is available in one housing in both a 2-wire and 3-wire (2P/3P) configuration, allowing the installer to select the control method appropriate for the given application or control system. The actuator automatically detects the type of wire connection. In the 2-point control version, two variants are available: NO (normally open) and NC (normally closed), which define the valve position when there is no control signal. During normal operation, the valve always requires a power supply.
The actuator mechanism also allows manual control – simply press the switch button to unlock the knob and change the position of the valve ball; releasing the button automatically restores automatic mode. The ergonomic knob provides convenient operation, while the actuator design prevents it from disconnecting from the valve on its own. The maximum differential pressure for the MIX 1 valve is 600 kPa (6 bar).
The STER Z 1 UNI actuator is powered by 230 V / 50 Hz, has an IP54 protection rating, an ambient temperature range of 0–60°C and a 3 × 0.75 mm power cable measuring 100 cm in length. The rotation time is 20 s at a rotation angle of 90°; the housing is made of PC+10%GF, and the motor torque is 6 Nm.
The MIX 1 UNI valve has a maximum working pressure of 32 bar (3.2 MPa) and a maximum operating temperature of 120°C, with a permitted glycol concentration of up to 50%. The maximum differential pressure is 6 bar (0.6 MPa). The KVS values for the individual diameters are: DN15 (½”) – 20 m³/h, DN20 (¾”) – 45 m³/h, DN25 (1”) – 60 m³/h. The valve body and ball/stem are made of Brass EN 12165, CW617N, and the valve thread is an internal thread (Rp).
The dimensions of selected versions of the IBO MIX 1 UNI C valve are: DN15 – L = 62 mm, H = 104 mm; DN20 – L = 68 mm, H = 110 mm; DN25 – L = 81 mm, H = 113 mm. The actuator is installed on the valve quickly and without tools – press the actuator onto the valve; removal is carried out by pulling it away with appropriate force. Installation is possible in only one correct position.
The instructions also include a description of the electrical connections for 2-point (NC/NO) and 3-point control, together with terminal markings (C, N, L, L1), wire colours (BK, BU, BR) and a description of the rotation directions when the phase is applied to the appropriate terminals. For safety reasons, all installation, servicing and electrical connection work may be carried out only by persons with the appropriate electrical and sanitary qualifications, in compliance with applicable regulations.
As the manufacturer, Dambat declares that the IBO MIX 1 UNI CONTROL shut-off valve with actuator complies with the relevant EU directives (LVD, EMC, RoHS) and the harmonised standards specified in the declaration of conformity, available together with the complete device manual on the website.
Content prepared on the basis of general data. Contact us for details.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – what is the IBO MIX 1 UNI CONTROL shut-off valve with actuator used for?
What is the IBO MIX 1 UNI CONTROL shut-off valve with actuator used for?
As the manufacturer of the IBO brand, we design the IBO MIX 1 UNI CONTROL zone valve to shut off the flow of the medium in water, heating, air-conditioning and ventilation systems, as well as in heat pump systems and water leak detection systems. The device should be used only under the conditions specified in Dambat’s technical documentation.
Where can I buy the IBO MIX 1 UNI CONTROL shut-off valve manufactured by Dambat?
As the manufacturer, we do not sell directly online. The IBO MIX 1 UNI CONTROL shut-off valve with actuator is available from our trade partners, installation wholesalers and authorised online distributors cooperating with Dambat. Content prepared on the basis of general data. Contact us for details.
What is the difference between the NO and NC versions of the IBO MIX 1 UNI CONTROL?
The NO version (normally open) means that the valve remains open when there is no control signal, whereas the NC version (normally closed) means that the valve remains closed when there is no signal. In both cases, the valve requires a power supply during normal operation, and the choice of version depends on the system requirements and operating logic.
How does 2-point and 3-point control work in the IBO MIX 1 UNI CONTROL actuator?
The IBO MIX 1 UNI CONTROL actuator supports both 2-wire (2P) and 3-wire (3P) control in one device, automatically recognising the wire connection method. In 2-point control, the C control terminal and the power supply are used, whereas in 3-point control, the direction of rotation of the valve ball is controlled by applying the phase to the appropriate L1 terminal for opening or closing, with a shared neutral wire.
What are the basic operating parameters of the IBO MIX 1 UNI CONTROL valve?
The MIX 1 UNI valve has a maximum working pressure of 32 bar, a maximum differential pressure of 6 bar, a maximum operating temperature of 120°C and a permitted glycol concentration of up to 50%. The KVS values are: 20 m³/h for DN15, 45 m³/h for DN20 and 60 m³/h for DN25, which should be taken into account when selecting the valve for a specific system.
How should the IBO MIX 1 UNI CONTROL valve be installed and serviced?
The actuator is installed without tools by pressing it onto the valve, and removed by pulling it away; the actuator can be installed in only one correct position. All installation, servicing and electrical work may be carried out only by appropriately qualified persons, with the power disconnected and in compliance with the safety rules described in the instructions.
Does the IBO MIX 1 UNI CONTROL valve require periodic maintenance?
If the valve does not change position for an extended period (more than 3 months), we recommend manually closing and opening the valve to remove any possible deposits from the valve ball. If the actuator operates abnormally, check the connections, supply voltage and the mechanical condition of the stem and, if necessary, carry out the maintenance procedures described in the instructions.