Description
MH 1300 hydrophore 50 – 230 V hydrophore set with a 50 l tank
MH 1300 with a 50 l hydrophore is a hydrophore set for automatic intake and pumping of raw water in households and facilities with higher consumption. It combines a multi-stage, self-suction surface pump MH 1300 with a power of 1.3 kW with a 50 l expansion tank and pressure automation. After unscrewing the draw-off point, the pump starts automatically, and when it is closed, it turns off - the hydrophore operates without manual operation.
For whom
- Owners of houses and facilities with higher demand – the MH 1300 hydrophore set supplies installations with multiple draw-off points, maintaining stable water pressure.
- Well users – as a hydrophore for wells, the pump draws water from surface intakes and shallow wells, maintaining equal pressure in the installation.
- Agricultural and horticultural farms – high efficiency up to 100 l/min is suitable for powering large irrigation systems, sprinklers and watering.
- Installers of water supply systems – a set with selected accessories shortens the time of completing and commissioning the pressure installation.
Application
The MH 1300 hydrophore set with a 50 l hydrophore by IBO is designed for automatic intake and pumping of technically clean, cold raw water in single-family houses, farms, recreational facilities and on plots with higher water consumption. The suction capacity reaches up to 8 m. High efficiency and lifting make the set suitable for supplying large installations, as well as for increasing the pressure in the system supplying the installation. The set is not a water treatment device - when using it for other purposes, we recommend ensuring appropriate preparation.
The pressure switch automatically starts and disconnects the pump depending on the pressure in the installation, and the 50 l hydrophore tank stabilizes the pressure and limits the frequency of engine starts. Dedicated equipment pre-selected for the pump simplifies the process of completing and assembling the installation. The set operates with a power supply of 1~ 230 V / 50 Hz.
Features of MH 1300 hydrophore 50 – description and technical data
The basis of the set is a multi-stage, self-suction centrifugal pump with a suction system based on a Venturi tube, which increases the pump's suction capacity. The suction body and console are made of cast iron, the pump housing and shaft are made of AISI 304 stainless steel, and the impeller and diffuser are made of PPO polymer. Multi-stage design ensures high and stable pressure. Thermal protection is built into the motor winding and protects it against overheating.
The pressure gauge is mounted on a five-way discharge outlet, which creates one connection node for the tank, installation and automation - this facilitates the distribution of the installation in many directions. An anti-vibration hose with an elbow limits the transfer of pump vibrations to the tank and piping.
In addition to the classic configuration of a pump with a hydrophore, the MH 1300 pump itself can be connected to PC or SK series hydrophore machines, as well as to the IVR-02 frequency converter. These machines additionally protect the pump against dry running. The offer of machines dedicated to IBO hydrophore sets can be found in ours offer of hydrophore machines.
- Pump type: multi-stage, self-suction, centrifugal, surface
- Engine power: 1.3 kW
- Power supply: 1~ 230V / 50Hz
- Max lifting: 55 m
- Max capacity: 100 l/min
- Suction capacity: up to 8 m
- Connection: 1×1"
- Degree of protection: IP44
- Insulation class: B
- Working mode: continuous
- Mounting position: horizontal
- Max. temperature of pumped liquid: 35°C
- Max. ambient temperature: 40°C
- Diaphragm tank: 50 years old
The set includes: MH 1300 pump, 50 l expansion tank, anti-vibration hose with elbow, five-way discharge outlet, pressure gauge, pressure switch.
IBO – 24 months (2 years) manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – MH 1300 hydrophore set 50
What is included in the MH 1300 hydrofor 50 set?
The set includes: MH 1300 pump, 50 l expansion tank, anti-vibration hose with elbow, five-way discharge outlet, pressure gauge and pressure switch. Other dedicated equipment and tanks with different capacities can be found in ours offer of hydrophore sets.
What are the benefits of the multi-stage design of the MH 1300 pump?
The multi-stage design allows you to obtain high and stable pressure with high efficiency, up to 100 l/min. This makes the MH 1300 suitable for installations with multiple draw-off points and for extensive irrigation.
What tank capacity should I choose for the set?
The MH 1300 pump can be equipped with tanks of various capacities, in horizontal, vertical and stainless steel versions. A larger hydrophore tank turns on the pump less often and provides a larger water reserve, a smaller one takes up less space. To select a configuration tailored to your individual needs, please contact Dambat technical department.
Does the kit work automatically?
Yes - the pressure switch starts the pump when the draw-off point is unscrewed and turns it off when it is closed. The expansion tank stabilizes the pressure and limits the frequency of engine starts.
Can the MH 1300 pump be connected to a hydrophore machine?
Yes - in addition to the classic configuration with an expansion tank, the MH 1300 pump can be combined with PC or SK series hydrophore machines, or with an IVR series frequency converter. These machines have additional protection against dry running. It is worth consulting with our specialist to select the appropriate configuration technical department.
From what depth does the pump suck water?
The suction capacity of the set reaches up to 8 m. The pump should be mounted in a horizontal position, and the suction pipe should be as short as possible and tight along its entire length, which makes it easier to prime the pump before starting.
Is the MH 1300 hydrofor 50 set covered by the manufacturer's warranty?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Where can you buy the MH 1300 hydrophore set 50?
As a manufacturer, we do not sell directly. The set is available from our trading partners, installation wholesalers and authorized online distributors.
- Lifting: 55.0 m,
- Performance: 100.0 l/min.,
- Suction capacity: 8.0 m,
- Power: 1.3 kW,
- Power supply: ,
- Frequency: 50 Hz,
- Power consumption: 6.0 Oh,
- Motor Speed: 2850 rpm ,
- Insulation class: B,
- Working mode: continuous,
- Degree of protection: IP44,
- Connection: 1x1",
- Outlet direction: Vertical,
- Working position: Horizontal,
- Maximum liquid temperature: 35°C,
- Maximum ambient temperature: 40°C,
- Dimension length/height/width: 43/15/18 cm,
- Weight: 22.0 kg,
Download: Karta_ZESTAWY_HYDROFOROWE_5.pdf
Download: Instrukcja_PPiH_PL-EN-SK.pdf
MH 1300 hydrophore 50 – 230 V hydrophore set with a 50 l tank
MH 1300 with a 50 l hydrophore is a hydrophore set for automatic intake and pumping of raw water in households and facilities with higher consumption. It combines a multi-stage, self-suction surface pump MH 1300 with a power of 1.3 kW with a 50 l expansion tank and pressure automation. After unscrewing the draw-off point, the pump starts automatically, and when it is closed, it turns off - the hydrophore operates without manual operation.
For whom
- Owners of houses and facilities with higher demand – the MH 1300 hydrophore set supplies installations with multiple draw-off points, maintaining stable water pressure.
- Well users – as a hydrophore for wells, the pump draws water from surface intakes and shallow wells, maintaining equal pressure in the installation.
- Agricultural and horticultural farms – high efficiency up to 100 l/min is suitable for powering large irrigation systems, sprinklers and watering.
- Installers of water supply systems – a set with selected accessories shortens the time of completing and commissioning the pressure installation.
Application
The MH 1300 hydrophore set with a 50 l hydrophore by IBO is designed for automatic intake and pumping of technically clean, cold raw water in single-family houses, farms, recreational facilities and on plots with higher water consumption. The suction capacity reaches up to 8 m. High efficiency and lifting make the set suitable for supplying large installations, as well as for increasing the pressure in the system supplying the installation. The set is not a water treatment device - when using it for other purposes, we recommend ensuring appropriate preparation.
The pressure switch automatically starts and disconnects the pump depending on the pressure in the installation, and the 50 l hydrophore tank stabilizes the pressure and limits the frequency of engine starts. Dedicated equipment pre-selected for the pump simplifies the process of completing and assembling the installation. The set operates with a power supply of 1~ 230 V / 50 Hz.
Features of MH 1300 hydrophore 50 – description and technical data
The basis of the set is a multi-stage, self-suction centrifugal pump with a suction system based on a Venturi tube, which increases the pump's suction capacity. The suction body and console are made of cast iron, the pump housing and shaft are made of AISI 304 stainless steel, and the impeller and diffuser are made of PPO polymer. Multi-stage design ensures high and stable pressure. Thermal protection is built into the motor winding and protects it against overheating.
The pressure gauge is mounted on a five-way discharge outlet, which creates one connection node for the tank, installation and automation - this facilitates the distribution of the installation in many directions. An anti-vibration hose with an elbow limits the transfer of pump vibrations to the tank and piping.
In addition to the classic configuration of a pump with a hydrophore, the MH 1300 pump itself can be connected to PC or SK series hydrophore machines, as well as to the IVR-02 frequency converter. These machines additionally protect the pump against dry running. The offer of machines dedicated to IBO hydrophore sets can be found in ours offer of hydrophore machines.
- Pump type: multi-stage, self-suction, centrifugal, surface
- Engine power: 1.3 kW
- Power supply: 1~ 230V / 50Hz
- Max lifting: 55 m
- Max capacity: 100 l/min
- Suction capacity: up to 8 m
- Connection: 1×1"
- Degree of protection: IP44
- Insulation class: B
- Working mode: continuous
- Mounting position: horizontal
- Max. temperature of pumped liquid: 35°C
- Max. ambient temperature: 40°C
- Diaphragm tank: 50 years old
The set includes: MH 1300 pump, 50 l expansion tank, anti-vibration hose with elbow, five-way discharge outlet, pressure gauge, pressure switch.
IBO – 24 months (2 years) manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – MH 1300 hydrophore set 50
What is included in the MH 1300 hydrofor 50 set?
The set includes: MH 1300 pump, 50 l expansion tank, anti-vibration hose with elbow, five-way discharge outlet, pressure gauge and pressure switch. Other dedicated equipment and tanks with different capacities can be found in ours offer of hydrophore sets.
What are the benefits of the multi-stage design of the MH 1300 pump?
The multi-stage design allows you to obtain high and stable pressure with high efficiency, up to 100 l/min. This makes the MH 1300 suitable for installations with multiple draw-off points and for extensive irrigation.
What tank capacity should I choose for the set?
The MH 1300 pump can be equipped with tanks of various capacities, in horizontal, vertical and stainless steel versions. A larger hydrophore tank turns on the pump less often and provides a larger water reserve, a smaller one takes up less space. To select a configuration tailored to your individual needs, please contact Dambat technical department.
Does the kit work automatically?
Yes - the pressure switch starts the pump when the draw-off point is unscrewed and turns it off when it is closed. The expansion tank stabilizes the pressure and limits the frequency of engine starts.
Can the MH 1300 pump be connected to a hydrophore machine?
Yes - in addition to the classic configuration with an expansion tank, the MH 1300 pump can be combined with PC or SK series hydrophore machines, or with an IVR series frequency converter. These machines have additional protection against dry running. It is worth consulting with our specialist to select the appropriate configuration technical department.
From what depth does the pump suck water?
The suction capacity of the set reaches up to 8 m. The pump should be mounted in a horizontal position, and the suction pipe should be as short as possible and tight along its entire length, which makes it easier to prime the pump before starting.
Is the MH 1300 hydrofor 50 set covered by the manufacturer's warranty?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Where can you buy the MH 1300 hydrophore set 50?
As a manufacturer, we do not sell directly. The set is available from our trading partners, installation wholesalers and authorized online distributors.
