MCI 4 AUTO - multi-stage pump with a frequency converter
MCI 4 AUTO is a surface multistage pump made of stainless steel, equipped with a high-efficiency frequency converter. It maintains constant pressure in the installation regardless of the current water demand, adjusting the engine speed to the consumption. By working with an inverter, a constant pressure water supply system can save up to 60% of energy compared to a system without an inverter. The pump achieves a capacity of up to 115 l/min and a lifting height of up to 54 m.
For whom
- Owners of single-family houses and larger properties - constant water pressure in an extensive installation, even at high pressure.
- Residents of high-altitude areas - effective raising of too low water pressure.
- Installers – one-button operation without the need to select separate automation, clear parameters and manufacturer support.
- Gardeners with automatic watering systems – Power supply watering with water from a well or rainwater tank.
- Investing in durability - fully stainless steel AISI 304 hydraulics resistant to long-term use.
Application
The MCI 4 AUTO pump works well in home and backyard water installations: it draws raw water from your own well or raises too low pressure from the water supply network, maintaining an even stream. With a lifting height of up to 54 m and a working pressure of up to 10 bar, it is suitable for extensive installations and modernization of water installations at home. The pump is not a water treatment device - if water from your own well is to be used for food purposes, it must be properly treated and quality controlled.
The device will also handle garden irrigation and watering with rainwater collected from the tank, as well as supplying smaller facilities with water. The MCI 4 AUTO 230 V pressure boosting pump works with typical installations found in Polish single-family houses.
Features of MCI 4 AUTO
MCI 4 AUTO is a pump with a built-in inverter that smoothly regulates the engine speed and maintains the set pressure regardless of the number of open intake points. The soft-start and soft-stop functions eliminate water hammer, and the reduced average rotational speed reduces shaft wear and extends the life of the device. In order to maintain smooth operation, the pump is equipped with an expansion vessel and a non-return valve.
The controller provides comprehensive protection: overcurrent, overvoltage, undervoltage and short circuit protection, protection against rotor blockage and protection against dry running without the need to install probes and sensors in the well. Operation comes down to setting the working pressure using a button. The pump operates quietly, which allows it to be installed also in living rooms.
The structure is entirely based on AISI 304 stainless steel - body, impellers, diffusers with covers, interwall, shaft, engine rotor and connections. The mechanical seal is made in the SIC/SIC/EPDM system, and the drive is an asynchronous squirrel-cage motor with a closed structure, in an aluminum housing with external ventilation.
- Max Lift: 54 m
- Max capacity: 115 l/min
- Suction capacity: 8 m
- Max. system pressure: 10 bar
- Power: 1.2 kW
- Engine speed: 0–3500 rpm
- Connections: 1¼" × 1"
- Degree of protection: IP55
- Insulation class: F
- Working mode: continuous (S1)
- Max. liquid temperature: 70°C
- Max. ambient temperature: 50°C
IBO – 24 months (2 years) manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – what is the MCI 4 AUTO pump used for?
What is the MCI 4 AUTO pump used for?
MCI 4 AUTO is a comprehensive solution for collecting and pumping raw water from your own well in households and on properties, as well as for raising too low water pressure from the water supply network. Thanks to the built-in inverter, it maintains constant pressure at every point of consumption, at an operating pressure of up to 10 bar.
How does a pump with an inverter differ from a classic hydrophore set?
Instead of cyclical switching on and off, the pump smoothly regulates the engine speed, adapting it to the current level of water demand. The result is constant pressure, gentle starts, quieter operation and energy savings of up to 60% compared to a system without an inverter.
Is MCI 4 AUTO suitable for watering the garden with rainwater from the tank?
Yes, the pump can draw water from a rainwater tank or well and power the irrigation system. When drawing from an open source, a non-return valve should be provided on the suction pipe to prevent automatic emptying of the pipeline - appropriate elements can be found in accessories for surface and hydrophore pumps.
How is the pump protected against dry running?
MCI 4 AUTO has built-in dry-running protection implemented by the controller, without the need to install probes or sensors in the well. Additionally, it is protected by a set of overcurrent, overvoltage, undervoltage, short-circuit protections and protection against blocked rotor.
Where can you buy the MCI 4 AUTO pump?
As a manufacturer, we do not sell directly. The MCI 4 AUTO pump is available from our trading partners, installation wholesalers and authorized online distributors.
What warranty is covered by the MCI 4 AUTO pump?
The MCI 4 AUTO pump by IBO is covered by a 24-month (2-year) manufacturer's warranty.
