MCI 16-20 – multi-stage, normally suction centrifugal pump 230V
MCI brand pumps IPRO are multi-stage, normally suction centrifugal pumps with hydraulics made entirely of AISI 304 stainless steel, intended for applications ranging from home installations to continuous operation in smaller industrial systems. The reinforced mechanical stuffing box allows operation with liquid temperatures up to 70°C, and the compact, horizontal design facilitates installation in installations with limited space.
For whom
-
Households – pompa MCI 16 sprawdza się w poborze i tłoczeniu wody surowej przed jej uzdatnieniem, podlewaniu ogrodu oraz podnoszeniu ciśnienia w domowej instalacji wodnej.
-
Installers – compact design and 2x2" connections facilitate installation in small technical rooms and hydrophore plants.
-
Small service facilities – the pump is used in pressure washers, laundries and pressure boosting installations in public buildings.
-
Agriculture and gardening – high efficiency facilitates the operation of extensive irrigation systems and sprinklers.
Application
MCI 16 brand pumps IPRO are intended for powering raw water intake and pumping systems in households, before its treatment, including for operating sprinklers and rainwater exploitation. They are also useful in public utility units - when increasing the pressure in water pumping systems and in purification systems. In smaller industrial applications, the pump is used in pressure washers, air conditioning systems and for pumping moderately viscous liquids with low aggressiveness. The pump is not a water treatment device - if water is to be used for food purposes, it must be properly treated and quality controlled.
In agriculture, MCI 16 pumps are used for irrigation, pumping and dosing fertilizers. High efficiency allows you to handle extensive sprinkler installations while maintaining high lifting capacity. The MCI 16 industrial pump operates in a single-phase system, powered by 1 ~ 230 V.
Features of MCI 16 – description and technical data
Hydraulika pomp MCI 16 – korpus, wał oraz króćce – wykonana jest w całości ze stali nierdzewnej AISI 304, zapewniając odporność na korozję niezależnie od warunków pracy instalacji. The mechanical stuffing box in the SiC/SiC/EPDM system provides higher wear resistance than typical graphite/silicon carbide combinations, which translates into longer seal life when working with a medium with increased requirements.
MCI 16 wyposażona jest w przyłącza tłoczne i ssawne w rozmiarze 2x2", co ułatwia współpracę ze standardową armaturą instalacyjną i zbiornikami przeponowymi.
- Pump type: multi-stage, normally suction, horizontal, stainless steel hydraulics
- Power supply: 1~230V/50Hz
- Insulation class: F (155)
- Degree of protection: IP55
- Max. temperature of pumped liquid: 70°C
- Max. ambient temperature: 50°C
- Max. system pressure: 8 bar
- Motor thermal protection: yes
- Pressure and suction connections: 2x2"
IPRO – 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – MCI 16 multistage pump
What applications is the MCI 16 pump suitable for?
MCI 16 pump brand IPRO is used to power raw water intake and pumping systems and to increase pressure in households before its treatment, in public utility units, in smaller industrial installations and in agriculture for irrigation and fertilizer dosing.
Why is the SiC/SiC mechanical stuffing box better than typical solutions?
The stuffing box in the SiC/SiC system (silicon carbide on both sliding surfaces) is characterized by higher hardness and wear resistance than typical graphite/silicon carbide combinations, which extends the seal life with longer pump operation.
Does the MCI 16 pump require additional protection against dry running?
The MCI 16 pump motor has built-in thermal protection, but additional protection against dry running is recommended in the installation, especially when powered from a tank or well with variable water level.
How to match the capacity of the MCI pump to the needs of my installation?
The MCI series offers capacities ranging from 50 to 500 l/min, and the variants from the MCI 16 group provide flow rates of up to 450 l/min. You can estimate the exact water demand for your installation with our help water demand calculator.
Where can you buy the MCI 16 multistage pump?
Dambat does not sell directly. The MCI 16 pump is available from our trading partners, installation wholesalers and authorized online distributors.
Is the MCI 16 brand pump IPRO Is it covered by the manufacturer's warranty?
IPRO – 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
