MCI 1-7 – multistage, self-priming centrifugal pump, 230 V
IPRO MCI pumps are multistage, self-priming centrifugal pumps with hydraulics made entirely of AISI 304 stainless steel, designed for applications ranging from domestic installations to continuous operation in smaller industrial systems. The reinforced mechanical seal allows operation with liquids at temperatures of up to 70°C, while the compact, horizontal design facilitates installation in systems with limited space.
Who it is for
-
Households – the MCI 1 pump is suitable for drawing and pumping raw water before treatment, watering gardens, and increasing pressure in domestic water systems.
-
Installers – the compact design and 1"x1" connections facilitate installation in small technical rooms and pressure-boosting systems.
-
Small commercial facilities – the pump is used in pressure washers, laundries, and pressure-boosting systems in public buildings.
-
Small-scale agriculture – the low flow rate combined with high head facilitates irrigation and sprinkler operation on plots and farms.
Applications
IPRO MCI 1 pumps are designed to supply raw-water intake and pumping systems in households before water treatment, including sprinkler operation and rainwater use. They are also suitable for public utility facilities, where they increase pressure in water-pumping systems and are used in treatment systems. In smaller industrial applications, the pump is used in pressure washers, air-conditioning systems, and for pumping moderately viscous, low-aggressiveness liquids. The pump is not a water-treatment device – if the water is intended for consumption, appropriate treatment and quality control must be provided.
In agriculture, MCI 1 pumps are used for irrigation as well as pumping and dosing fertilizers. Thanks to their compact dimensions and high head at a relatively low flow rate, they are suitable wherever a considerable difference in elevation or system resistance must be overcome with moderate flow requirements. The MCI 1 industrial pump operates in a single-phase system powered by 1~230 V.
MCI 1 features – description and technical data
The hydraulics of MCI 1 pumps – the body, shaft, and connections – are made entirely of AISI 304 stainless steel, providing corrosion resistance regardless of the system’s operating conditions. The SiC/SiC/EPDM mechanical seal provides greater wear resistance than typical graphite/silicon carbide combinations, resulting in a longer seal service life when operating with demanding media.
All models in the series are equipped with 1"x1" discharge and suction connections, facilitating compatibility with standard installation fittings and diaphragm tanks.
- Pump type: multistage, self-priming, horizontal, stainless-steel hydraulics
- Power supply: 1~230 V / 50 Hz
- Insulation class: F (155)
- Protection rating: IP55
- Max. pumped-liquid temperature: 70°C
- Max. ambient temperature: 50°C
- Max. system pressure: 8 bar
- Motor thermal protection: yes
- Discharge and suction connections: 1x1"
IPRO – 36-month (3-year) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – MCI 1 multistage pump
What applications is the MCI 1 pump suitable for?
The IPRO MCI 1 pump is used to supply raw-water intake and pumping systems and to increase pressure in households before water treatment, in public utility facilities, in smaller industrial systems, and in agriculture for irrigation and fertilizer dosing.
Why is the SiC/SiC mechanical seal better than typical solutions?
The SiC/SiC seal, with silicon carbide on both sliding surfaces, offers greater hardness and wear resistance than typical graphite/silicon carbide combinations, extending the seal’s service life during prolonged pump operation.
In what position should the MCI 1 pump be installed?
The MCI 1 pump is designed for horizontal installation on a stable surface, near the diaphragm tank or pressure controller with which it operates in a typical pressure-boosting system.
What is the difference between the MCI 1-3, MCI 1-4, MCI 1-6, and MCI 1-7 models?
The models differ in the number of hydraulic stages, which determines the maximum head and motor power – from the smallest MCI 1-3 to the most powerful MCI 1-7. The model selection depends on the pressure required in the system at a similar flow rate. If you have any doubts about choosing the right pump for your system, please contact our technical department.
Where can I buy the MCI 1 multistage pump?
Dambat does not sell directly. The MCI 1 pump is available from our sales partners, installation wholesalers, and authorized online distributors.
Does the IPRO MCI 1 pump come with a manufacturer’s warranty?
IPRO – 36-month (3-year) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
