MCI 1-5 – multistage standard-priming 230V centrifugal pump
IPRO MCI pumps are multistage, standard-priming centrifugal pumps with hydraulics made entirely of AISI 304 stainless steel, designed for applications ranging from domestic installations to continuous operation in smaller industrial systems. The reinforced mechanical seal allows operation with liquids at temperatures of up to 70°C, while the compact horizontal design facilitates installation in systems with limited space.
For whom
-
Households – the MCI 1 pump is suitable for raw-water intake and pumping before treatment, garden watering, and pressure boosting in domestic water systems.
-
Installers – the compact design and 1"x1" connections facilitate installation in small technical rooms and pump rooms.
-
Small service facilities – the pump is used in pressure washers, laundries, and pressure-boosting systems in public utility buildings.
-
Small-scale farming – low capacity combined with high head facilitates irrigation and sprinkler operation on plots and farms.
Applications
IPRO MCI 1 pumps are designed to supply raw-water intake and pumping systems in households before treatment, including sprinkler operation and rainwater use. They are also suitable for public utility facilities—for increasing pressure in water pumping systems and in treatment systems. In smaller industrial applications, the pump is used in pressure washers, air-conditioning systems, and for pumping moderately viscous liquids with low aggressiveness. The pump is not a water-treatment device—if the water is to be used for consumption, appropriate treatment and quality control must be provided.
In agriculture, MCI 1 pumps are used for irrigation and for pumping and dosing fertilizers. Thanks to their compact dimensions and high head at relatively low capacity, they are suitable where a significant difference in elevation or system resistance must be overcome with moderate flow requirements. The MCI 1 industrial pump operates in a single-phase system powered by 1~230 V.
MCI 1 features – description and technical data
The hydraulics of the MCI 1 pump—including the casing, shaft, and connections—are made entirely of AISI 304 stainless steel, ensuring corrosion resistance regardless of the installation's operating conditions. The SiC/SiC/EPDM mechanical seal provides greater wear resistance than typical graphite/silicon carbide combinations, resulting in a longer seal service life when handling demanding fluids.
All models in the series are equipped with 1"x1" discharge and suction connections, making them easy to use with standard installation fittings and pressure tanks.
- Pump type: multistage, normally primed, horizontal, stainless-steel hydraulics
- Power supply: 1~230 V / 50 Hz
- Insulation class: F (155)
- Protection rating: IP55
- Max. pumped-liquid temperature: 70°C
- Max. ambient temperature: 50°C
- Max. installation pressure: 8 bar
- Motor thermal protection: yes
- Discharge and suction connections: 1x1"
IPRO – 36 months (3 years) of the manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – MCI 1 multistage pump
What applications is the MCI 1 pump suitable for?
The IPRO MCI 1 pump is suitable for supplying raw-water intake and pumping systems, increasing water pressure in households before water treatment, in public utility facilities, smaller industrial installations, and agriculture for irrigation and fertilizer dosing.
Why is a SiC/SiC mechanical seal better than typical solutions?
The SiC/SiC mechanical seal (silicon carbide on both sliding surfaces) is characterized by greater hardness and wear resistance than typical graphite/silicon carbide combinations, which extends the seal's service life during longer pump operation.
In what position is the MCI 1 pump installed?
The MCI 1 pump is designed for horizontal installation on a stable surface, near the pressure tank or pressure controller with which it operates in a typical hydrophore system.
What are the differences between the MCI 1-3, MCI 1-4, MCI 1-6, and MCI 1-7 models?
The models differ in the number of hydraulic stages, which affects the maximum head and motor power – from the smallest MCI 1-3 to the most powerful MCI 1-7. Model selection depends on the required pressure in the installation at a similar flow rate. If you have any doubts when selecting the right pump for your installation, we encourage you to contact our technical department.
Where can the MCI 1 multistage pump be purchased?
Dambat does not sell directly. The MCI 1 pump is available from our trading partners, installation wholesalers, and authorized online distributors.
Is the IPRO MCI 1 pump covered by the manufacturer's warranty?
IPRO – 36 months (3 years) of the manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
