MCI 1-4 - 230V multistage, normally priming centrifugal pump
IPRO MCI pumps are multistage, normally priming centrifugal pumps with hydraulics made entirely of AISI 304 stainless steel, designed for applications ranging from domestic installations to continuous operation in smaller industrial systems. The reinforced mechanical seal allows operation with liquids at temperatures up to 70°C, while the compact, horizontal design makes installation easier in space-constrained systems.
Who it's for
-
Households - the MCI 1 pump is suitable for drawing and pumping raw water before treatment, watering gardens, and boosting pressure in domestic water systems.
-
Installers - the compact design and 1"x1" connections make installation easier in small utility rooms and pump rooms.
-
Small service facilities - the pump is used in pressure washers, laundries, and pressure-boosting systems in public buildings.
-
Small-scale agriculture - the low flow rate and high head make irrigation and sprinkler operation easier on plots and farms.
Applications
IPRO MCI 1 pumps are designed to supply systems for drawing and pumping raw water in households before treatment, including operating sprinklers and using rainwater. They are also suitable for public facilities, where they can boost pressure in water pumping systems and be used in treatment systems. W smaller industrial applications, the pump is used in pressure washers, air-conditioning systems, and for pumping moderately viscous, mildly aggressive liquids. The pump does not treat water - if the water is intended for consumption, it must be properly treated and its quality monitored.
W agriculture, MCI 1 pumps are used for irrigation, as well as for pumping and dosing fertilizers. Their compact dimensions and high head at a relatively low flow rate make them suitable where a significant elevation difference or system resistance must be overcome with a moderate flow demand. The MCI 1 industrial pump operates on a single-phase supply at 1~230 V.
MCI 1 features - description and technical data
The hydraulics of the MCI 1 pump - casing, shaft and ports - are made entirely of AISI 304 stainless steel, ensuring corrosion resistance regardless of the installation’s operating conditions. The SiC/SiC/EPDM mechanical seal offers greater wear resistance than typical graphite/silicon carbide combinations, resulting in a longer seal life when handling fluids with more demanding requirements.
All models in the series are equipped with 1"x1" discharge and suction connections, making them easy to use with standard installation fittings and pressure tanks.
- Pump type: multistage, standard-priming, horizontal, stainless steel hydraulics
- Power supply: 1~230 V / 50 Hz
- Insulation class: F (155)
- Protection rating: IP55
- Max. pumped liquid temperature: 70°C
- Max. ambient temperature: 50°C
- Max. system pressure: 8 bar
- Motor thermal protection: yes
- Discharge and suction connections: 1x1"
IPRO – 36-month (3-year) manufacturer's warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently Asked Questions (FAQ) – MCI 1 multistage pump
What applications is the MCI 1 pump suitable for?
The IPRO MCI 1 pump is used to supply raw water intake and pumping systems, and to increase water pressure in households before treatment, in public utility facilities, smaller industrial installations, and in agriculture for irrigation and fertilizer dosing.
Why is the SiC/SiC mechanical seal better than typical solutions?
The SiC/SiC mechanical seal (silicon carbide on both sliding surfaces) is harder and more wear-resistant than typical graphite/silicon carbide combinations, extending the seal's service life during prolonged pump operation.
W What position should the MCI 1 pump be installed in?
The MCI 1 pump is designed to be installed horizontally on a stable surface, near the pressure tank or pressure controller it works with in a typical pressurized water system.
How do the MCI 1-3, MCI 1-4, MCI 1-6 and MCI 1-7 models differ?
The models differ in the number of hydraulic stages, which affects the maximum head and motor power, from the smallest MCI 1-3 to the most powerful MCI 1-7. The model you choose depends on the pressure required in the installation, with similar flow rates. W If you have any questions about choosing the right pump for your installation, please contact our technical department.
Where can you buy the MCI 1 multistage pump?
Dambat does not sell directly to customers. The MCI 1 pump is available from our trade partners, plumbing wholesalers and authorized online distributors.
Does the IPRO MCI 1 pump come with a manufacturer's warranty?
IPRO – 36-month (3-year) manufacturer's warranty. Dambat provides warranty and post-warranty service.
