MAGNET AUTO 750 - compact pump with a frequency converter
MAGNET AUTO 750 is a compact pump with a built-in frequency converter, designed to collect and pump technically clean raw water from household intakes and to increase the pressure from the water supply network. Thanks to smooth regulation of engine speed, the device maintains constant pressure at all draw-off points, operates quietly and consumes less energy than a classic hydrophore set. Despite the small 750 W motor, the pump achieves a capacity of up to 117 l/min.
For whom
- Owners of single-family houses - stable water pressure throughout the building, even when drawing from several taps and watering the garden at the same time.
- Residents of new housing estates and network ends - effective raising of too low water pressure.
- Installers – simple two-button configuration without the need to select separate automation, clear technical parameters and manufacturer support.
- Users of plots and gardens – Power supply irrigation installation with water from a well or rainwater tank.
- Small service facilities - continuous operation (class S1) and efficiency supporting several premises.
Application
The MAGNET AUTO 750 pump works as the heart of a home water system: it draws raw water from your own well or raises too low pressure from the water supply network, ensuring a comfortable, constant stream regardless of the network load. This is a solution for modernizing water installations, dedicated to wherever a classic hydrophore does not provide stable pressure. The pump is not a water treatment device - if water from your own well is to be used for food purposes, it must be properly treated and quality controlled.
The device will also handle garden irrigation and watering with rainwater collected from the tank, as well as water supply for several smaller commercial premises. The MAGNET AUTO 750 230 V pressure boosting pump works with typical installations found in Polish single-family houses.
Features of MAGNET AUTO 750
MAGNET AUTO 750 is a pump equipped with a built-in inverter that smoothly regulates the engine speed and maintains the set pressure regardless of the number of open intake points. Soft start reduces mechanical loads and wear of the engine and hydraulic part, and operation at reduced speeds translates into quiet operation and lower energy consumption compared to classic hydrophore sets.
Configuration comes down to setting the working pressure using two buttons + and –; the current parameters are shown on the inverter's LED display. The controller provides a set of protections: protection against dry running (provided by the inverter, without external probes), motor overload, too high and too low voltage and water hammer.
The hydraulic part is based on a PPO polymer impeller and diffuser, and the motor shaft and rotor are made of AISI 304 stainless steel. The ceramic/graphite mechanical seal and the IP54 protection level ensure durability in home installations and commercial premises.
- Max Lift: 48 m
- Max capacity: 117 l/min
- Suction capacity: 8 m
- Power: 750 W (0.75 kW)
- Current: 5.0/8.0 A
- Engine speed: 0–4000 rpm
- Frequency Range: 30–50 Hz
- Connections: 1" × 1"
- Degree of protection: IP54
- Working mode: continuous (S1)
- Max. liquid temperature: 60°C
- Motor shaft and rotor: AISI 304 stainless steel
IBO – 24 months (2 years) manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – what is the MAGNET AUTO 750 pump used for?
What is the MAGNET AUTO 750 pump used for?
MAGNET AUTO 750 collects and pumps raw water from its own well and raises too low pressure from the water supply network. Thanks to the built-in frequency converter, it maintains constant pressure on all intake valves.
How does a pump with an inverter differ from a classic hydrophore set?
Instead of cyclically turning the pump on and off, the inverter smoothly regulates the engine speed, adapting it to the current water demand. The result is constant pressure, gentle starts, quieter operation and lower power consumption than in a system with a traditional hydrophore.
Is MAGNET AUTO 750 suitable for watering the garden with rainwater from a tank?
Yes, the pump can draw water from a rainwater tank or well and power the irrigation system. When drawing from an open source, a non-return valve should be installed on the suction pipe to prevent automatic emptying of the pipeline - appropriate elements can be found in accessories for surface and hydrophore pumps.
How to set the pump working pressure?
Configuration does not require a specialist visit - just use two + and - buttons to set the desired working pressure, which the pump will then maintain automatically. The current parameters are shown on the inverter's LED display.
Where can you buy the MAGNET AUTO 750 pump?
As a manufacturer, we do not sell directly. The MAGNET AUTO 750 pump is available from our trading partners, installation wholesalers and authorized online distributors.
What warranty is covered by the MAGNET AUTO 750 pump?
The MAGNET AUTO 750 pump by IBO is covered by a 24-month (2-year) manufacturer's warranty.
