LIRA 1300 - submersible pump for sewage with a grinder
submersible pump LIRA 1300 by IBO with a built-in shredding mechanism
a device designed for pumping septic tanks, sewage and rainwater. Built-in
The float switch automatically controls the pump and protects the engine against
starting without water.
For whom
-
House and plot owners – the pump crushes impurities contained in the sewage, reducing the risk of clogging when draining the septic tank.
-
Installation and service companies – built-in float switch automates pump operation without additional control equipment.
-
Agricultural and breeding farms – the pump collects rain and surface water, and the shredder deals with organic pollutants.
-
Construction companies and enterprises – compact design facilitates portable installation when draining flooded rooms.
Application
submersible pump LIRA 1300 is designed for pumping septic tanks, sewage and water
rainy. The pump can be installed with a flexible discharge hose or screwed on
for a rigid discharge pipeline.
The device is cooled by the surrounding water, so the motor body should be
always submerged to at least half of its height - longer operation when exposed
the pump may overheat. submersible pump LIRA 1300 230 V reaches lifting height
up to 10 m with a capacity of up to 430 l/min.
Features of the LIRA 1300 pump
The LIRA 1300 pump is made of gray cast iron cover and body, and the motor housing
made of AISI 304 stainless steel. The shaft is made of AISI 304 stainless steel, and the stuffing box
the mechanical one works in the SiC/graphite/NBR system.
The built-in grinding mechanism crushes solid contaminants contained in sewage
before they are forced, reducing the risk of clogging the hose or pipeline. Switch
The float automatically controls the operation of the pump and provides basic protection against
dry operation, and the thermal protection built into the winding turns off the pump in the event of failure
motor overload. Installing a non-return valve on the discharge port prevents this
water flowing back after the pump is turned off and too frequent, cyclical activation
devices.
- Pump type: submersible pump for sewage, with a built-in grinding mechanism
- Power supply: 230V (single phase)
- Engine power: 1300 W
- Lifting height (Hmax): 10 m
- Efficiency (Qmax): 430 l/min
- Insulation class: F
- Degree of protection: IP68
- Working mode: continuous
- Working position: vertical
- Rotational speed: 2900 rpm
- Max. liquid temperature: 35°C
- Switch: built-in float switch
- Motor protection: thermal, built into the winding
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – submersible pump LIRA 1300
What type of sewage is the LIRA 1300 pump intended for?
The pump is intended for pumping septic tanks, sewage and rainwater. Acceptable
the size of solid impurities is 50 mm and the water must not contain any elements
abrasive materials such as sand.
Does the LIRA 1300 pump crush solid impurities?
Yes, the pump is equipped with a mechanism that grinds solid impurities
in sewage. For safety reasons, never put your hands into the discharge port
or the suction of a pump connected to the power supply.
How does the pump protect itself against dry running?
Protection is provided by a built-in float switch that shuts off Power supply engine when
the water level drops below a safe minimum. Additionally, thermal protection
in the winding protects the motor against overheating.
Will the LIRA 1300 pump work in my installation?
The pump requires submersion at least halfway up the motor body because it is
cooled by the surrounding water. When connected to a rigid pipeline, it is recommended
installation of a non-return valve on the discharge port, limiting cyclic activation
pumps. If in doubt, we encourage you to
contact the technical department.
Where can you buy the LIRA 1300 submersible pump?
Dambat does not sell directly. The LIRA 1300 pump is available from partners
commercial stores, installation wholesalers and authorized online distributors.
What warranty conditions apply to the LIRA 1300 pump?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service
Dambat assures.