KBFU 80-4-4.0P T sludge pump with agitator, 400 V, 1450 rpm
The KBFU 80-4-4.0P T is a 4 kW three-phase sludge pump equipped with a four-pole motor running at 1450 rpm and a chrome-alloy agitator. Its slower motor, combined with a bottom-mounted agitator and the ability to pass particles up to 30 mm, makes this model a good choice for tougher applications – thick sludge, bentonite slurries and media that smaller KBFU series pumps cannot handle.
Who it's for
-
Mines and quarries handling thick slurry – the ability to handle particles up to 30 mm and operate in media with a density of up to 1200 kg/m³ are specifications beyond the reach of standard KBFU series models.
-
Drilling companies working with bentonite – the chrome-alloy agitator actively breaks up sediment at the inlet, enabling the pumping of thick drilling slurries.
-
Geotechnical and foundation contractors – the combination of an agitator and a 4-pole motor works well for pumping drilling spoil from piles and diaphragm walls.
-
Industrial plants handling high-density media – the 4-pole, 1450 rpm motor offers significantly longer service life than 2850 rpm equivalents during continuous operation in extremely demanding conditions.
-
Equipment selection engineers – the extended pH range of 5–9 allows use in mildly acidic and alkaline environments where standard models are not recommended.
Applications
The KBFU 80-4-4.0P T is designed for pumping thick sludge, drilling spoil and media containing abrasive particles up to 30 mm in diameter – a range well beyond the capabilities of standard KBFU series models. The chrome-alloy agitator mounted beneath the pump impeller sets sediment in motion, breaking up clumps and allowing them to be drawn in without risking a blockage in the hydraulic system. The cast-iron hydraulic unit, with a highly abrasion-resistant coating on the impeller and agitator, ensures resistance to intense wear, even when pumping media with a density close to 1200 kg/m³.
The four-pole motor running at 1450 rpm is a key design difference compared with the other models in the KBFU series. The lower rotational speed results in less mechanical stress on the drive system, lower vibration and longer bearing life – especially important during continuous operation in harsh conditions. The cooling jacket keeps the motor at a safe temperature without requiring the pump to be fully submerged.
Features of the KBFU 80-4-4,0P T pump
- Suitable for pumping water with sand: Yes
- Cooling jacket: Yes
- Maximum particle size (mm): 30
- Discharge outlet: 3" threaded, vertical direction
- Thermal protection: Yes - double (built into the motor winding)
- Agitator: Yes (chrome alloy)
- Float switch: No
- Bearings: NSK (Japan)
- Operating mode: continuous
IBO - 24-month (2-year) manufacturer's warranty.
Dambat - a trusted manufacturer of pumps and water engineering equipment, with quality certificates.
Frequently asked questions (FAQ) - KBFU 80-4-4,0P T slurry pump
What does the "4P" designation in the model name mean?
The "4P" designation indicates a four-pole motor running at 1450 rpm, whereas standard models in the KBFU series have two-pole motors (2850 rpm). The lower rotational speed translates into significantly longer motor life, less vibration, and better resistance to loads when pumping dense slurries.
What is the maximum particle size for the KBFU 80-4-4,0P T?
The model handles solid particles up to 30 mm in diameter - six times larger than the standard 5 mm in other KBFU models. The chrome-alloy agitator actively breaks up sediment at the inlet, enabling it to pump even dense mineral and drilling slurries.
Can the KBFU 80-4-4,0P T be used to pump bentonite?
Yes - this model is designed, among other things, to work with bentonite and other dense drilling slurries. The permissible medium density is up to 1200 kg/m³.
Where can I buy the KBFU 80-4-4,0P T pump?
The pump is available from Dambat's retail partners, plumbing wholesalers, and specialist technical stores. Dambat does not sell directly.
How long is the warranty for the KBFU 80-4-4,0P T?
IBO - 24-month (2-year) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat, Adamów 50, Grodzisk Mazowiecki.