IBO JET 100 LONG (1.1 kW, 230 V) hydrophore pump
IBO JET 100 LONG (1.1 kW, 230 V) hydrophore pump is a single-stage, centrifugal and self-suction surface device. Thanks to the use of a venturi tube system, the pump is characterized by increased water suction capacity (up to a depth of 8 meters). Its efficient, but relatively light and compact design will work well in power supply and irrigation systems, and the solid cast iron body ensures durability of use.
For whom B2B
-
Irrigation system installers: the device is suitable for smaller automatic garden watering installations, where it is required to increase the water pressure from local intakes.
-
Owners of recreational plots and summer houses: the simplicity of installation and small dimensions allow you to conveniently supply your house with clean, cold water.
-
Farmers and gardeners: a good alternative for transporting water when irrigating crops with lower and medium flow requirements.
-
Plumbing wholesalers and stores: The pump perfectly complements the range as a universal and inexpensive device that can work with PC and SK tanks or machines.
Application
The pump is designed to pump only clean, cold water from its own intakes, where the water table does not drop below 8 m. Its main task is to supply water to residential and farm buildings, as well as recreational plots. It is also useful in systems for increasing pressure in existing water supply installations.
IBO JET 100 LONG is designed for continuous operation and can function as an independent pumping unit or part of the entire hydrophore set, cooperating with both expansion tanks and pressure controllers. Due to the thermal fuse built into the motor winding, the device is protected against harmful overheating, ensuring safe and stable operation.
Features
- Suction capacity from a depth of max. 8 m
- Small pump dimensions
- Possibility of working with a tank or hydrophore machines (e.g. PC, SK)
- Thermal protection built into the motor winding
- 24-month warranty
- Warranty and post-warranty service
Technical data
- Lifting: 50.0 m
- Capacity: 60.0 l/min.
- Suction capacity: 8.0 m
- Motor power: 1100 W (1.1 kW)
- Power supply: 230V
- Frequency: 50 Hz
- Current consumption: 4.6 A
- Engine speed: 2850 RPM
- Insulation class: B
- Operating mode: continuous
- Degree of protection: IP44
- Connections [inch]: 1 x 1"
- Working position: Horizontal
- Maximum liquid temperature: 35°C
- Maximum ambient temperature: 40°C
- Dimensions length/height/width [cm]: 43/21/18
- Weight: 13 kg
Materials
- Pump body: cast iron
- Shaft: AISI 304 stainless steel
- Impeller: PPO polymer
- Console: cast iron
- Diffuser/bar: PPO polymer
- Mechanical stuffing box: ceramic/graphite/NBR
FAQ IBO JET 100 LONG
Where is this product sold?
Where is this product sold?
+
The IBO JET 100 LONG (1.1 kW, 230 V) hydrophore pump can be found in industry retail outlets and wholesalers cooperating with the IBO brand.
Can this pump be used to create a hydrophore set?
Can this pump be used to create a hydrophore set?
+
Yes, this model works very well with properly selected pressure tanks or intelligent control machines, such as PC or SK switches.
What is the difference between the LONG version and the regular JET 100 A?
What is the difference between the LONG version and the regular JET 100 A?
+
The LONG version has a slightly different body size (43 cm long and 21 cm high compared to 39 cm x 20 cm in the standard version), weighs 13.5 kg (standard version is 13 kg) and differs slightly in current consumption (4.6 A).
What is the warranty and service of this device?
What is the warranty and service of this device?
+
The warranty is 24 months. The only authorized one service is run by Dambat.
Dambat is a trusted Polish manufacturer of pumps and hydrotechnical equipment with quality certificates.
