Description
Inverter for the IVR 10-040 S pump
IBO IVR 10 is an intelligent controller for water pumps, intended for professional applications. It maintains a constant, set pressure in the installation, smoothly adjusting the pump speed to the current water consumption, and at the same time protects it against dry running, overload, short circuit and voltage fluctuations. It is available in single- and three-phase versions, in a wide power range, and with the possibility of combining up to 6 devices into pump groups.
For whom
- Installers and service companies - constant pressure and a full pump protection package, selected for single- and three-phase devices in a wide power range.
- Industrial facilities, halls and warehouses - stable pressure in technical installations with variable consumption and lower energy consumption.
- Agricultural and livestock farms – reliable water supply and irrigation, also from deep well pumps.
- Waterworks and water treatment plants - construction of multi-pump sets up to 6 pumps controlled from one device.
Application
The IVR 10 inverter is used where it is necessary to maintain constant water pressure and control and protect the pump. It is connected directly to a deep-well, surface or submersible pump - single-phase or three-phase - and automatically turns it on and off and adjusts the speed to the current installation demand. Soft start and stop eliminate water hammer, and lower average speeds reduce energy consumption.
Most often, he works in water supply installations, in industry, waterworks and treatment plants, in irrigation of fields and greenhouses, and in systems using rainwater. Several controllers can be combined into a pump group serving one system. The IVR 10 inverter is available in the 1×230 V / 3×400 V version.
Features of IVR 10
IVR 10 maintains constant pressure by controlling the pump using SPWM technology and V/F regulation (variable speed, variable frequency) with the PID algorithm. Based on continuous pressure analysis, the inverter adjusts the pump speed to the actual demand, which reduces energy and water consumption and, thanks to lower average speed, extends the pump's life. Dry-running protection works without the need to install probes or sensors in the well.
Several IVR 10 controllers can be combined into a pump group of up to 6 pumps, managed from one selected master device. The device is matched to the pump according to its power, voltage and current. As a professional device, the IVR 10 should be installed by a qualified installer, with effective grounding and - if necessary - with additional measures to reduce electromagnetic interference.
- Type: intelligent inverter (pump controller)
- Power of the pump supported: 0.37–3.0 kW
- Output voltage: 1~230V
- Max current: 15 A
- Pressure setting range: 0.5–9 bar
- Pressure sensor: 24 V / 4–20 mA (10 / 16 bar)
- Degree of protection: IP55
- Controls: pump group up to 6 pumps
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – what is the IVR 10 inverter used for?
What is the IVR 10 inverter used for?
The IVR 10 inverter is a controller that maintains constant water pressure in the installation by smoothly regulating the speed of the connected pump. At the same time, it protects the pump against dry running, overload, short circuit and voltage fluctuations and automatically turns it on and off depending on water consumption.
How does the IVR 10 inverter differ from a classic hydrophore?
A classic hydrophore set turns on the pump in steps and rests on a large tank, which causes the pressure to fluctuate. The IVR 10 inverter selects the pump speed continuously using SPWM technology with PID control, maintaining constant pressure and reducing energy consumption. A small expansion vessel with a volume of 2 liters is sufficient.
What pumps does IVR 10 work with?
IVR 10 is designed for deep-well, surface and submersible pumps with power from 0.37 to 7.5 kW. Single-phase versions (S) are powered by 1×230 V, and three-phase versions (T) by 3×400 V. As a professional device, it should be selected and installed by a qualified installer.
Can IVR 10 inverters be combined into pump groups?
Yes. Several IVR 10 controllers can be connected to a group of up to 6 pumps. The whole thing is managed by one selected main device to which a pressure sensor is connected, and the remaining inverters adjust the operation to the system's needs.
Is the IVR 10 inverter covered by the manufacturer's warranty?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Where can you buy the IBO IVR 10 inverter?
As a manufacturer, we do not sell directly. The IBO IVR 10 inverter is available from our trading partners, installation wholesalers and authorized online distributors.
- Power: 3.0 kW,
- Power supply: ,
- Frequency: 50 Hz,
- Power consumption: 15.0 Oh,
- Motor Speed: rpm ,
- Dimensions: 210/173/155 mm
- Weight: 3.0 kg,
Inverter for the IVR 10-040 S pump
IBO IVR 10 is an intelligent controller for water pumps, intended for professional applications. It maintains a constant, set pressure in the installation, smoothly adjusting the pump speed to the current water consumption, and at the same time protects it against dry running, overload, short circuit and voltage fluctuations. It is available in single- and three-phase versions, in a wide power range, and with the possibility of combining up to 6 devices into pump groups.
For whom
- Installers and service companies - constant pressure and a full pump protection package, selected for single- and three-phase devices in a wide power range.
- Industrial facilities, halls and warehouses - stable pressure in technical installations with variable consumption and lower energy consumption.
- Agricultural and livestock farms – reliable water supply and irrigation, also from deep well pumps.
- Waterworks and water treatment plants - construction of multi-pump sets up to 6 pumps controlled from one device.
Application
The IVR 10 inverter is used where it is necessary to maintain constant water pressure and control and protect the pump. It is connected directly to a deep-well, surface or submersible pump - single-phase or three-phase - and automatically turns it on and off and adjusts the speed to the current installation demand. Soft start and stop eliminate water hammer, and lower average speeds reduce energy consumption.
Most often, he works in water supply installations, in industry, waterworks and treatment plants, in irrigation of fields and greenhouses, and in systems using rainwater. Several controllers can be combined into a pump group serving one system. The IVR 10 inverter is available in the 1×230 V / 3×400 V version.
Features of IVR 10
IVR 10 maintains constant pressure by controlling the pump using SPWM technology and V/F regulation (variable speed, variable frequency) with the PID algorithm. Based on continuous pressure analysis, the inverter adjusts the pump speed to the actual demand, which reduces energy and water consumption and, thanks to lower average speed, extends the pump's life. Dry-running protection works without the need to install probes or sensors in the well.
Several IVR 10 controllers can be combined into a pump group of up to 6 pumps, managed from one selected master device. The device is matched to the pump according to its power, voltage and current. As a professional device, the IVR 10 should be installed by a qualified installer, with effective grounding and - if necessary - with additional measures to reduce electromagnetic interference.
- Type: intelligent inverter (pump controller)
- Power of the pump supported: 0.37–3.0 kW
- Output voltage: 1~230V
- Max current: 15 A
- Pressure setting range: 0.5–9 bar
- Pressure sensor: 24 V / 4–20 mA (10 / 16 bar)
- Degree of protection: IP55
- Controls: pump group up to 6 pumps
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – what is the IVR 10 inverter used for?
What is the IVR 10 inverter used for?
The IVR 10 inverter is a controller that maintains constant water pressure in the installation by smoothly regulating the speed of the connected pump. At the same time, it protects the pump against dry running, overload, short circuit and voltage fluctuations and automatically turns it on and off depending on water consumption.
How does the IVR 10 inverter differ from a classic hydrophore?
A classic hydrophore set turns on the pump in steps and rests on a large tank, which causes the pressure to fluctuate. The IVR 10 inverter selects the pump speed continuously using SPWM technology with PID control, maintaining constant pressure and reducing energy consumption. A small expansion vessel with a volume of 2 liters is sufficient.
What pumps does IVR 10 work with?
IVR 10 is designed for deep-well, surface and submersible pumps with power from 0.37 to 7.5 kW. Single-phase versions (S) are powered by 1×230 V, and three-phase versions (T) by 3×400 V. As a professional device, it should be selected and installed by a qualified installer.
Can IVR 10 inverters be combined into pump groups?
Yes. Several IVR 10 controllers can be connected to a group of up to 6 pumps. The whole thing is managed by one selected main device to which a pressure sensor is connected, and the remaining inverters adjust the operation to the system's needs.
Is the IVR 10 inverter covered by the manufacturer's warranty?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Where can you buy the IBO IVR 10 inverter?
As a manufacturer, we do not sell directly. The IBO IVR 10 inverter is available from our trading partners, installation wholesalers and authorized online distributors.
