Description
The IBO ISD 40-370 submersible pump with a grinder is designed to pump clean and contaminated water without abrasive particles such as sand or gravel. As the manufacturer of the IBO and Dambat brands, we designed this pump for demanding domestic and industrial conditions, providing effective contaminant grinding and reliable operation on a 230 V power supply.
Who it's for
- Households – efficiently emptying septic tanks and domestic tanks without the risk of clogging the system.
- Residential building users – quickly pumping water out of flooded basements, garages and other rooms.
- Farms – reliable pumping of pre-treated wastewater and contaminated water from various operating tanks.
- Industrial plants – reliable operation in pre-treated wastewater drainage systems that require a pump with a grinder.
- Service and installation companies – a versatile tool for emergency drainage and pumping dirty water in typical installations.
Applications
- Pumping clean and contaminated water without abrasive particles from tanks, sumps and chambers.
- Emptying septic tanks and pumping pre-treated wastewater in domestic installations.
- Pumping water out of flooded rooms, basements and garages in residential and commercial buildings.
- Draining rainwater tanks while maintaining an adequate distance from the bottom to protect the pump from sediment.
The 230 V ISD 40-370 submersible pump is suitable for pumping greywater and contaminated water in typical sanitary installations.
Features, description and technical data
The IBO ISD 40-370 pump is a submersible pump with a grinder, designed for pumping clean and contaminated water. The contaminants must not be abrasive, such as sand or gravel, and must not exceed the maximum diameter permitted for the pump type, as specified in the product datasheet.
The unit features a semi-open impeller with a cutting plate, allowing it to break down soft, fibrous contaminants while reducing the risk of clogging the discharge pipe and receiving system. The pump should be suspended at least 30 cm above the bottom of the rainwater tank to prevent it from drawing in sediment and protect the hydraulic components from damage.
The ISD 40-370 runs on a 230 V / 50 Hz power supply and uses a 370 W motor operating at 2850 rpm, ensuring a stable operating point and a flow rate of up to 250 l/min at a maximum head of 9 m (values from the ISD 40-370 datasheet).
The pump is designed for continuous S1 operation in fluids with a maximum temperature of 35°C and a water pH range of 6.5 to 8.5, corresponding to typical operating conditions in wastewater and rainwater systems in Poland. The motor's F insulation class and IPX8 protection rating ensure safe operation when fully submerged, provided it is installed correctly and appropriately protected electrically.
WThe ISD 40-370 comes with a 1 1/4-inch (DN32) discharge connection and a design suited for pumping pretreated wastewater. The impeller passage is designed to handle typical soft debris, in accordance with the values specified in the product documentation. A float switch is not included, allowing the installer to choose the appropriate way to control the pump (manually or with an external float switch).
While operating, the pump's minimum immersion level should be no less than the pump's height. Operation at a lower immersion level is possible, but only under the user's direct supervision and with the ability to disconnect the power supply immediately in case of a malfunction. The pump must not run “dry” - a lack of water in the hydraulic chamber will damage the seals and motor.
Key technical specifications of the ISD 40-370 IBO: maximum head 9 m, maximum flow rate 250 l/min, motor power 370 W, single-phase 230 V power supply, insulation class F, IPX8 protection rating, S1 duty, maximum fluid temperature 35°C, pH range 6.5–8.5, 1 1/4-inch discharge outlet, and pump weight of approx. 15.5 kg according to the product datasheet. 2-year manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certifications.
Frequently asked questions (FAQ) – what is the ISD 40-370 submersible pump with a macerator used for?
What is the IBO ISD 40-370 submersible pump designed for?
The IBO ISD 40-370 submersible pump is designed for pumping clean and contaminated water, pre-treated wastewater, and rainwater without abrasive particles, as stated in the product’s catalog sheet.
Where can I buy the IBO ISD 40-370 pump?
As the manufacturer of the IBO and Dambat brands, we distribute the ISD 40-370 pump through our network of trade partners, authorized distributors, and plumbing wholesalers; it is not sold directly on the manufacturer’s website.
What contaminants can the ISD 40-370 pump handle?
The ISD 40-370 pump can pump contaminated water that does not contain abrasive materials such as sand and gravel, provided the maximum particle size does not exceed the limit specified for this model in the product’s technical data.
How does the ISD 40-370 differ from standard submersible pumps without a macerator?
WUnlike standard pumps without a grinder, the ISD 40-370 model has a semi-open impeller with a cutting disc, allowing it to grind soft debris and reduce the risk of clogging the discharge pipe and system.
How should the ISD 40-370 pump be correctly installed in a rainwater tank?
The pump should be suspended at least 30 cm above the bottom of the tank so that it does not draw in sediment, and submerged to a depth of at least its own height, in accordance with the operating instructions.
Can the ISD 40-370 pump run continuously?
The ISD 40-370 pump is designed for S1 operation, which means it can run continuously while meeting the parameters specified in the technical data, with adequate cooling and submersion in the pumped medium.
What is the manufacturer’s warranty period for the IBO ISD 40-370 pump?
The IBO submersible pump ISD 40-370 comes with an “IBO – 24-month (2-year) manufacturer’s warranty.” Detailed warranty terms are set out in the documentation supplied with the unit.
- Capacity [l/min.]: 250.0
- Head [m]: 9.0
- Power [kW]: 0.37
- Power supply [V]: 1~230 V
- Frequency [Hz]: 50
- Current [A]: 1.24
- Motor speed (rpm): 2850
- Operating mode: continuous
- Insulation class: F
- Protection rating: IPX8
- Dimensions H/W/L [mm]: 360/166/231
- Max. liquid temperature: 35
- Product weight [kg]: 15.4
- Power cable length (m): 10.0
- Connection [DN/inches]: DN40
- Installation position: vertical
- Max. immersion depth (m): 5
The IBO ISD 40-370 submersible pump with a grinder is designed to pump clean and contaminated water without abrasive particles such as sand or gravel. As the manufacturer of the IBO and Dambat brands, we designed this pump for demanding domestic and industrial conditions, providing effective contaminant grinding and reliable operation on a 230 V power supply.
Who it's for
- Households – efficiently emptying septic tanks and domestic tanks without the risk of clogging the system.
- Residential building users – quickly pumping water out of flooded basements, garages and other rooms.
- Farms – reliable pumping of pre-treated wastewater and contaminated water from various operating tanks.
- Industrial plants – reliable operation in pre-treated wastewater drainage systems that require a pump with a grinder.
- Service and installation companies – a versatile tool for emergency drainage and pumping dirty water in typical installations.
Applications
- Pumping clean and contaminated water without abrasive particles from tanks, sumps and chambers.
- Emptying septic tanks and pumping pre-treated wastewater in domestic installations.
- Pumping water out of flooded rooms, basements and garages in residential and commercial buildings.
- Draining rainwater tanks while maintaining an adequate distance from the bottom to protect the pump from sediment.
The 230 V ISD 40-370 submersible pump is suitable for pumping greywater and contaminated water in typical sanitary installations.
Features, description and technical data
The IBO ISD 40-370 pump is a submersible pump with a grinder, designed for pumping clean and contaminated water. The contaminants must not be abrasive, such as sand or gravel, and must not exceed the maximum diameter permitted for the pump type, as specified in the product datasheet.
The unit features a semi-open impeller with a cutting plate, allowing it to break down soft, fibrous contaminants while reducing the risk of clogging the discharge pipe and receiving system. The pump should be suspended at least 30 cm above the bottom of the rainwater tank to prevent it from drawing in sediment and protect the hydraulic components from damage.
The ISD 40-370 runs on a 230 V / 50 Hz power supply and uses a 370 W motor operating at 2850 rpm, ensuring a stable operating point and a flow rate of up to 250 l/min at a maximum head of 9 m (values from the ISD 40-370 datasheet).
The pump is designed for continuous S1 operation in fluids with a maximum temperature of 35°C and a water pH range of 6.5 to 8.5, corresponding to typical operating conditions in wastewater and rainwater systems in Poland. The motor's F insulation class and IPX8 protection rating ensure safe operation when fully submerged, provided it is installed correctly and appropriately protected electrically.
WThe ISD 40-370 comes with a 1 1/4-inch (DN32) discharge connection and a design suited for pumping pretreated wastewater. The impeller passage is designed to handle typical soft debris, in accordance with the values specified in the product documentation. A float switch is not included, allowing the installer to choose the appropriate way to control the pump (manually or with an external float switch).
While operating, the pump's minimum immersion level should be no less than the pump's height. Operation at a lower immersion level is possible, but only under the user's direct supervision and with the ability to disconnect the power supply immediately in case of a malfunction. The pump must not run “dry” - a lack of water in the hydraulic chamber will damage the seals and motor.
Key technical specifications of the ISD 40-370 IBO: maximum head 9 m, maximum flow rate 250 l/min, motor power 370 W, single-phase 230 V power supply, insulation class F, IPX8 protection rating, S1 duty, maximum fluid temperature 35°C, pH range 6.5–8.5, 1 1/4-inch discharge outlet, and pump weight of approx. 15.5 kg according to the product datasheet. 2-year manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certifications.
Frequently asked questions (FAQ) – what is the ISD 40-370 submersible pump with a macerator used for?
What is the IBO ISD 40-370 submersible pump designed for?
The IBO ISD 40-370 submersible pump is designed for pumping clean and contaminated water, pre-treated wastewater, and rainwater without abrasive particles, as stated in the product’s catalog sheet.
Where can I buy the IBO ISD 40-370 pump?
As the manufacturer of the IBO and Dambat brands, we distribute the ISD 40-370 pump through our network of trade partners, authorized distributors, and plumbing wholesalers; it is not sold directly on the manufacturer’s website.
What contaminants can the ISD 40-370 pump handle?
The ISD 40-370 pump can pump contaminated water that does not contain abrasive materials such as sand and gravel, provided the maximum particle size does not exceed the limit specified for this model in the product’s technical data.
How does the ISD 40-370 differ from standard submersible pumps without a macerator?
WUnlike standard pumps without a grinder, the ISD 40-370 model has a semi-open impeller with a cutting disc, allowing it to grind soft debris and reduce the risk of clogging the discharge pipe and system.
How should the ISD 40-370 pump be correctly installed in a rainwater tank?
The pump should be suspended at least 30 cm above the bottom of the tank so that it does not draw in sediment, and submerged to a depth of at least its own height, in accordance with the operating instructions.
Can the ISD 40-370 pump run continuously?
The ISD 40-370 pump is designed for S1 operation, which means it can run continuously while meeting the parameters specified in the technical data, with adequate cooling and submersion in the pumped medium.
What is the manufacturer’s warranty period for the IBO ISD 40-370 pump?
The IBO submersible pump ISD 40-370 comes with an “IBO – 24-month (2-year) manufacturer’s warranty.” Detailed warranty terms are set out in the documentation supplied with the unit.




