Intelligent water pump IQ 2 AUTO – a modern solution for home and business
IQ2 AUTO is a compact, energy-saving and extremely quiet pump with a built-in frequency converter. I assure you constant pressure in the installation, soft start engine and lower energy consumption than classic hydrophore sets. Perfect for homes, hotels, businesses and irrigation systems from your own intakes (wells) or for increasing pressure from the water supply network.
Thanks to its modern design, the pump offers high efficiency, high suction power and extensive protection, which allows for energy-saving operation, variable frequency and maintaining constant pressure. It is easy to install and use, and its noise level is only 45 dB.
Perfect for increasing water pressure. The pump uses built-in ones to work 2 engines DC low voltage 30-48 V with permanent magnets. The pump rotation speed can reach 12000 rpm, ensuring product safety and high efficiency. Thanks to its innovative design, the pump suction can reach up to 9.5 m.
Application
- Raising the pressure of utility and tap water.
- Water intake from a well (two suction modes: from the network / from the well).
- Power supply devices such as solar heaters or purifiers.
- Irrigation of gardens and fields.
- Hotels, canteens, multi-story buildings, air conditioning systems and heat circulation.
The most important advantages
- Constant pressure in the installation thanks to the frequency converter.
- Great suction power for 9.5 m and maximum lifting to 40 m.
- High flow – up to 70 l/min.
- Built-in protections: against dry running, overload, water hammer and voltage fluctuations.
- Automatic adaptation to installation and function Timing (1/2/6/12/24 h).
- Quiet operation approx. 45 dB, easy installation and operation.
Technical parameters
| Model |
IQ2 AUTO |
| Rated power |
400 W |
| Power supply input/frequency |
AC 160-240V, 50/60Hz |
| Power supply output |
DC 30V+48V |
| Power consumption |
4.2A + 4.2A |
| Rotational speed |
12,000 rpm |
| Maximum flow |
70 l/min |
| Maximum lifting |
40 m |
| Max. suction depth |
9.5 m |
| Degree of protection |
IP54 |
| Insulation class |
H |
| Working mode |
continuous – S1 |
| Connection diameter (suction × discharge) |
1″ × 1″ |
| Max pressure |
10 bar |
| Temp. pumped water |
0°C to +100°C |
| Temp. surroundings |
4°C to +55°C |
| Water pH |
6,5–8,5 |
| Noise level |
45 dB |
| Dimensions (L × W × H) |
290 × 200 × 285 mm |
Frequently asked questions (FAQ)
Is the IQ2 AUTO pump suitable for drawing water from wells?
Yes. The device has two suction modes: from the water supply network and from a well. It can suck in water from a depth of up to 9.5 m.
Is the pump energy efficient?
Yes. Thanks to the frequency converter used, it consumes less electricity than classic hydrophore sets, and additionally enables gentle engine start-up.
What protections does the pump have?
The pump is protected against dry running, overload, voltage drops and increases, water hammer and installation leaks.
Can the pump run continuously?
Yes. The IQ2 AUTO pump has an operating mode continuous (S1) and an additional function Timing enabling periodic operation (1/2/6/12/24 h).
What type of water is the pump intended for?
The pump is intended for clean water and liquids with similar properties (pH 6.5–8.5, temperature from 0°C to +100°C).
Where can I buy IBO devices?