Description
IPC 550 - submersible pump with automatic and manual mode
submersible pump IPC 550 by IBO is a 550 W device designed for pumping technically clean and slightly polluted water, free from grinding elements. Integrated an electronic switch built into the body allows operation in automatic or automatic mode manual, which allows for both current and ad hoc drainage of incoming water emptying the tank almost to the bottom.
For whom
- House and plot owners – two operating modes allow you to select the control method for current drainage or one-time emptying of the tank.
- Installation and service companies – integrated electronic switch built into the body facilitates installation without additional control equipment.
- Agricultural and breeding farms – 550 W power allows for higher efficiency than in smaller models of similar dimensions.
- Wholesale and technical stores – manual mode enabling pumping water almost to the bottom of the tank distinguishes the model from simpler single-mode solutions.
Application
submersible pump IPC 550 is designed for pumping technically clean and light water contaminated, not containing grinding elements such as sand. The pump serves for draining flooded rooms, swimming pools and wells, as well as for pumping water from ponds, rivers, lakes and shallow ring wells. The pump is not a treatment device water - when using it for other purposes, we recommend ensuring appropriate preparation.
The device operates in a vertical position, fully immersed, at maximum temperature pumped liquid up to 35°C. The permissible size of solid impurities is 5 mm, which meets the requirements for technically clean and slightly polluted water. submersible pump IPC 550 230 V works well both in small wells and in demanding tanks periodic, thorough emptying.
Features of the IPC 550 pump
The IPC 550 pump is constructed with a technopolymer casing, and the shaft and rotor The engine is made of AISI 304 stainless steel. The impeller is made of PPO polymer and stuffing box mechanical in the SiC/graphite system ensure resistance to typical pollutants occurring in raw and slightly polluted water.
The integrated electronic switch built into the pump body supports two operating modes: in automatic mode, the pump turns on at a water level of approx. 13 cm and turns off at approx. 5 cm, while in manual mode it empties the tank to a level of approx. 2 mm. Security thermals built into the winding protect the motor against overheating, and the threaded, stepped one the discharge stub enables the connection of hoses of various diameters.
- Pump type: submersible pump for technically clean and slightly polluted water, with automatic and manual mode
- Power supply: 230V (single phase)
- Engine power: 550 W
- Lifting height (Hmax): 6 m
- Efficiency (Qmax): 100 l/min
- Insulation class: B
- Degree of protection: IP68
- Working mode: continuous
- Working position: vertical
- Rotational speed: 2850 rpm
- Max. liquid temperature: 35°C
- Permissible amount of solid pollutants: 5mm
- Power cable length: 10 m, terminated with a plug
- Switch: integrated electronic switch built into the body - automatic mode (switching on approx. 13 cm, turning off approx. 5 cm) and manual mode (emptying to approx. 2 mm)
- Motor protection: thermal, built into the winding
- Discharge port: threaded, stepped, ¾–1¼"
- Materials: housing – technopolymer, shaft and rotor – AISI 304 stainless steel, rotor – PPO polymer, mechanical stuffing box – SiC/graphite
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – submersible pump IPC 550
What type of water is the IPC 550 pump intended for?
The IPC 550 pump is intended for technically clean and slightly polluted water that does not contain any grinding elements such as sand. Permissible amount of solid pollutants is 5 mm.
What is the difference between automatic and manual operating modes in the IPC 550 pump?
In automatic mode, the pump turns on automatically when the water level is approximately 13 cm and turns off at approx. 5 cm, which is useful for current drainage of incoming water. The manual mode allows you to empty the tank almost to the bottom, to the level approx. 2 mm.
What is the difference between the IPC 550 pump and the IPE 400 and IPK 400 models?
The IPC 550 pump has a higher power (550 W) than the IPE 400 and IPK 400 models (400 W) and an integrated electronic switch with two operating modes - automatic and manual, enabling pumping water almost to the bottom of the tank. The IPE 400 and IPK 400 models work exclusively in automatic mode, controlled by an electronic probe or float switch mechanical.
How to choose the operating mode of the IPC 550 pump to suit your needs?
The automatic mode is suitable for regularly draining the incoming water, e.g. in a manhole, while the manual mode allows you to almost empty the tank temporarily to the very bottom. If you have any doubts about the selection, we encourage you to: contact the technical department.
Where can you buy the IPC 550 submersible pump?
Dambat does not sell directly. The IPC 550 pump is available from partners commercial stores, installation wholesalers and authorized online distributors.
What warranty conditions apply to the IPC 550 pump?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service Dambat assures.
- Lifting: 6.0 m,
- Performance: 100.0 l/min.,
- Power: 0.55 kW,
- Power supply: ,
- Current: 3.0 Oh,
- Frequency: 50 Hz,
- Motor Speed: 2850 rpm ,
- Insulation class: B,
- Working mode: continuous,
- Degree of protection: IP68,
- Rotor type: ,
- Particle Size: 5 mm,
- Connection [DN/inch]: 1¼,
- Outlet direction: Vertical,
- Built-in Float/probe: YES,
- Working position: Vertical,
- Power cable length: 10.0 m,
- Dimension length/height/width: 292/178/197 mm,
- Weight: 4.2 kg,
ADDITIONAL INFORMATION
• Max. ambient temperature: 40°C
MATERIALS
• Pump housing: technopolymer
• Shaft and rotor: AISI 304 stainless steel
• Impeller: PPO polymer
• Mechanical stuffing box: Ceramic/Carbon.
IPC 550 - submersible pump with automatic and manual mode
submersible pump IPC 550 by IBO is a 550 W device designed for pumping technically clean and slightly polluted water, free from grinding elements. Integrated an electronic switch built into the body allows operation in automatic or automatic mode manual, which allows for both current and ad hoc drainage of incoming water emptying the tank almost to the bottom.
For whom
- House and plot owners – two operating modes allow you to select the control method for current drainage or one-time emptying of the tank.
- Installation and service companies – integrated electronic switch built into the body facilitates installation without additional control equipment.
- Agricultural and breeding farms – 550 W power allows for higher efficiency than in smaller models of similar dimensions.
- Wholesale and technical stores – manual mode enabling pumping water almost to the bottom of the tank distinguishes the model from simpler single-mode solutions.
Application
submersible pump IPC 550 is designed for pumping technically clean and light water contaminated, not containing grinding elements such as sand. The pump serves for draining flooded rooms, swimming pools and wells, as well as for pumping water from ponds, rivers, lakes and shallow ring wells. The pump is not a treatment device water - when using it for other purposes, we recommend ensuring appropriate preparation.
The device operates in a vertical position, fully immersed, at maximum temperature pumped liquid up to 35°C. The permissible size of solid impurities is 5 mm, which meets the requirements for technically clean and slightly polluted water. submersible pump IPC 550 230 V works well both in small wells and in demanding tanks periodic, thorough emptying.
Features of the IPC 550 pump
The IPC 550 pump is constructed with a technopolymer casing, and the shaft and rotor The engine is made of AISI 304 stainless steel. The impeller is made of PPO polymer and stuffing box mechanical in the SiC/graphite system ensure resistance to typical pollutants occurring in raw and slightly polluted water.
The integrated electronic switch built into the pump body supports two operating modes: in automatic mode, the pump turns on at a water level of approx. 13 cm and turns off at approx. 5 cm, while in manual mode it empties the tank to a level of approx. 2 mm. Security thermals built into the winding protect the motor against overheating, and the threaded, stepped one the discharge stub enables the connection of hoses of various diameters.
- Pump type: submersible pump for technically clean and slightly polluted water, with automatic and manual mode
- Power supply: 230V (single phase)
- Engine power: 550 W
- Lifting height (Hmax): 6 m
- Efficiency (Qmax): 100 l/min
- Insulation class: B
- Degree of protection: IP68
- Working mode: continuous
- Working position: vertical
- Rotational speed: 2850 rpm
- Max. liquid temperature: 35°C
- Permissible amount of solid pollutants: 5mm
- Power cable length: 10 m, terminated with a plug
- Switch: integrated electronic switch built into the body - automatic mode (switching on approx. 13 cm, turning off approx. 5 cm) and manual mode (emptying to approx. 2 mm)
- Motor protection: thermal, built into the winding
- Discharge port: threaded, stepped, ¾–1¼"
- Materials: housing – technopolymer, shaft and rotor – AISI 304 stainless steel, rotor – PPO polymer, mechanical stuffing box – SiC/graphite
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – submersible pump IPC 550
What type of water is the IPC 550 pump intended for?
The IPC 550 pump is intended for technically clean and slightly polluted water that does not contain any grinding elements such as sand. Permissible amount of solid pollutants is 5 mm.
What is the difference between automatic and manual operating modes in the IPC 550 pump?
In automatic mode, the pump turns on automatically when the water level is approximately 13 cm and turns off at approx. 5 cm, which is useful for current drainage of incoming water. The manual mode allows you to empty the tank almost to the bottom, to the level approx. 2 mm.
What is the difference between the IPC 550 pump and the IPE 400 and IPK 400 models?
The IPC 550 pump has a higher power (550 W) than the IPE 400 and IPK 400 models (400 W) and an integrated electronic switch with two operating modes - automatic and manual, enabling pumping water almost to the bottom of the tank. The IPE 400 and IPK 400 models work exclusively in automatic mode, controlled by an electronic probe or float switch mechanical.
How to choose the operating mode of the IPC 550 pump to suit your needs?
The automatic mode is suitable for regularly draining the incoming water, e.g. in a manhole, while the manual mode allows you to almost empty the tank temporarily to the very bottom. If you have any doubts about the selection, we encourage you to: contact the technical department.
Where can you buy the IPC 550 submersible pump?
Dambat does not sell directly. The IPC 550 pump is available from partners commercial stores, installation wholesalers and authorized online distributors.
What warranty conditions apply to the IPC 550 pump?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service Dambat assures.
