Description
IPC 275T Controller for 2 Pumps - Intelligent IPRO Pump Protection
The IPRO IPC 275T controller is an intelligent, automatic system for managing the operation of two pumps, with an LCD display. It controls their alternating operation, can keep one pump in reserve, and protects both against dry running and electrical faults.
Who is it for?
- Installers of pumping stations and dual-pump systems - the IPC controller automatically switches to the standby pump when the first one fails.
- Facilities with increased water demand - when the liquid level is high, both pumps operate simultaneously, increasing system capacity.
- Users with a standby pump - alternating pump operation distributes the load evenly and extends the system's service life.
- Service companies - the LCD display with voltage and current readings, along with a log of the latest faults, simplifies operation.
Application
The IPC 275T controller is designed to control and protect two centrifugal, surface, sewage, booster, multistage, submersible, or in-line pumps. It enables water supply and tank drainage, with level, pressure, or time-based control.
The device is wall-mounted. The protection system provides direct pump starting. An external level or pressure sensor is used to trigger operation, while the type of fault is indicated by a code on the display as well as by visual and audible signals.
IPC controller features - description and technical data
The system provides automatic, maintenance-free management of two pumps, with readings shown on the LCD display. Dry-run protection operates by monitoring current - when current consumption falls below the set value (for example, when there is no water), the pump is stopped. The fault log stores the ten most recent events, simplifying diagnostics.
- Type: intelligent, automatic pump controller and protection system
- Control: two pumps
- Pump operating modes: alternating, lead / standby, simultaneous operation at high level
- Control functions: water supply, tank drainage, level / pressure / time-based control
- Protection: dry running (current monitoring), pump lock, overload, overvoltage, voltage drop, phase loss, short circuit
- Anti-corrosion protection: prevents pumps from seizing during extended downtime
- Supported sensors: float switch, level probe, pressure sensor, pressure switch
- Liquid-level indication: three-state (high / medium / low)
- Measurements: digital voltmeter and ammeter
- Fault log: 10 most recent events
- Control mode: AUTO / manual
IPRO - 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat - a trusted manufacturer of pumps and water engineering equipment with quality certifications.
Frequently asked questions (FAQ) - IPRO IPC controller for 2 pumps
What is the IPC 275T controller for 2 pumps used for?
The IPC 275T controller automatically manages the operation of two pumps and protects them against dry running and electrical faults. It supports centrifugal, surface, sewage, booster, multistage, submersible, and in-line pumps.
How does the controller manage the operation of two pumps?
The pumps can operate alternately, with one serving as the lead pump and the other as the standby pump. If one pump fails, the other starts automatically, and when the liquid level is high, both pumps operate simultaneously.
How does the IPC controller protect pumps against dry running?
The controller monitors the pump's current consumption. When the operating current falls below the set value - which occurs when there is no water - the pump is stopped automatically.
What electrical protections does the IPC controller provide?
The controller protects the pumps against locking, overload, overvoltage, voltage drops, phase loss, and short circuits. It also provides anti-corrosion protection that prevents the pumps from seizing during extended downtime.
Where can I buy an IPC controller for 2 pumps?
Dambat does not sell directly. IPRO IPC controllers are available from trade partners, plumbing and installation wholesalers, and authorized online distributors.
What is the warranty on the IPC controller?
IPRO - 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
- Type: ,
- Number of pumps supported: 2,
- Maximum power: 7.5 kW,
- Power supply: 300–400 V,
- Frequency: 50 Hz,
- Maximum supported current: A
- Protection rating:
- Maximum liquid temperature: °C
- Dimensions: 210/139/65 mm,
- Weight: 3.0 kg.
ADDITIONAL INFORMATION
• Trigger signal:
o Float switch,
o pressure sensor,
o pressure switch,
o electrode,
• Fault status:
o Fault code display,
o visual and audible fault signal,
• Automatic calibration button for overcurrent/undercurrent parameters (adjustable no-load start delay),
• Automatic restart after the voltage returns to normal following a voltage drop or surge,
• Water supply to the pressurized tank, drainage from the non-pressurized tank, continuous monitoring of pipeline pressure,
• Digital voltmeter, ammeter, and three-state liquid-level display in the tank,
• Protection against pump blockage, dry-run protection, overcurrent protection, undercurrent protection, phase-loss protection, overvoltage or undervoltage protection, short-circuit protection,
• AUTO/Manual operating mode switch button,
• Automatic restoration of the set operating mode after a fault,
• No-load restart: adjustable range of 0–999 minutes.
• Anti-corrosion monitoring interval: every 15 days,
• Dry-run response time: 0.1 s–3 min,
• Overload response time: 0.1 s–3 min,
• Automatic fault response: 1 s.
• Supported voltage range: 304–464 V (adjustable value),
• Display: LCD,
• Starting method: direct-on-line,
• Liquid-level indications: high, medium, low,
• Maximum signal transmission distance: ≤2000 m (without strong electromagnetic interference),
• Installation: wall-mounted (indoors).
IPC 275T Controller for 2 Pumps - Intelligent IPRO Pump Protection
The IPRO IPC 275T controller is an intelligent, automatic system for managing the operation of two pumps, with an LCD display. It controls their alternating operation, can keep one pump in reserve, and protects both against dry running and electrical faults.
Who is it for?
- Installers of pumping stations and dual-pump systems - the IPC controller automatically switches to the standby pump when the first one fails.
- Facilities with increased water demand - when the liquid level is high, both pumps operate simultaneously, increasing system capacity.
- Users with a standby pump - alternating pump operation distributes the load evenly and extends the system's service life.
- Service companies - the LCD display with voltage and current readings, along with a log of the latest faults, simplifies operation.
Application
The IPC 275T controller is designed to control and protect two centrifugal, surface, sewage, booster, multistage, submersible, or in-line pumps. It enables water supply and tank drainage, with level, pressure, or time-based control.
The device is wall-mounted. The protection system provides direct pump starting. An external level or pressure sensor is used to trigger operation, while the type of fault is indicated by a code on the display as well as by visual and audible signals.
IPC controller features - description and technical data
The system provides automatic, maintenance-free management of two pumps, with readings shown on the LCD display. Dry-run protection operates by monitoring current - when current consumption falls below the set value (for example, when there is no water), the pump is stopped. The fault log stores the ten most recent events, simplifying diagnostics.
- Type: intelligent, automatic pump controller and protection system
- Control: two pumps
- Pump operating modes: alternating, lead / standby, simultaneous operation at high level
- Control functions: water supply, tank drainage, level / pressure / time-based control
- Protection: dry running (current monitoring), pump lock, overload, overvoltage, voltage drop, phase loss, short circuit
- Anti-corrosion protection: prevents pumps from seizing during extended downtime
- Supported sensors: float switch, level probe, pressure sensor, pressure switch
- Liquid-level indication: three-state (high / medium / low)
- Measurements: digital voltmeter and ammeter
- Fault log: 10 most recent events
- Control mode: AUTO / manual
IPRO - 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat - a trusted manufacturer of pumps and water engineering equipment with quality certifications.
Frequently asked questions (FAQ) - IPRO IPC controller for 2 pumps
What is the IPC 275T controller for 2 pumps used for?
The IPC 275T controller automatically manages the operation of two pumps and protects them against dry running and electrical faults. It supports centrifugal, surface, sewage, booster, multistage, submersible, and in-line pumps.
How does the controller manage the operation of two pumps?
The pumps can operate alternately, with one serving as the lead pump and the other as the standby pump. If one pump fails, the other starts automatically, and when the liquid level is high, both pumps operate simultaneously.
How does the IPC controller protect pumps against dry running?
The controller monitors the pump's current consumption. When the operating current falls below the set value - which occurs when there is no water - the pump is stopped automatically.
What electrical protections does the IPC controller provide?
The controller protects the pumps against locking, overload, overvoltage, voltage drops, phase loss, and short circuits. It also provides anti-corrosion protection that prevents the pumps from seizing during extended downtime.
Where can I buy an IPC controller for 2 pumps?
Dambat does not sell directly. IPRO IPC controllers are available from trade partners, plumbing and installation wholesalers, and authorized online distributors.
What is the warranty on the IPC controller?
IPRO - 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.