Description
IPC 130M Pump Controller – Intelligent Protection for the IPRO Pump
The IPRO IPC 130M pump controller is an intelligent, automatic system for managing the operation of a single pump with an LCD display. It controls the pump in water supply or tank drainage mode and protects it against dry running and electrical faults.
Who It Is For
- Well drillers and pump installers – the IPC controller stops the pump during dry running based on current monitoring, reducing the risk of damage.
- Users of submersible pumps and pressure-boosting systems – a full range of electrical protections safeguards the pump against overloads and power supply problems.
- Farms and facilities with their own water intake – automatic restart after a fault has cleared ensures continuous water supply.
- Service companies – the LCD display with voltage and current measurements and a log of the latest errors simplifies system diagnostics.
Applications
The IPC 130M controller is designed for centrifugal, surface, sewage, booster, multistage, submersible, and inline pumps. It enables water supply and tank drainage, with level-, pressure-, or time-based control.
The device is wall-mounted. The protection system provides direct pump starting. An external level or pressure sensor triggers operation, while the type of fault is indicated by a code on the display as well as by visual and audible signals.
IPC Controller Features – Description and Technical Data
The system provides automatic, maintenance-free pump operation management with readings shown on an LCD display. Dry-run protection operates based on current monitoring – when current consumption falls below the set value, for example when there is no water, the pump is stopped. The error log stores the ten most recent events, simplifying diagnostics.
- Type: intelligent automatic pump controller and protection device
- Control: one pump
- Control functions: water supply, tank drainage, level / pressure / time-based control
- Protections: dry running (current monitoring), pump lock, overload, overvoltage, undervoltage, phase loss, short circuit
- Anti-corrosion protection: prevents the pump from seizing during extended periods of inactivity
- Supported sensors: float switch, level probe, pressure sensor, pressure switch
- Liquid level indication: three-state (high / medium / low)
- Measurements: digital voltmeter and ammeter
- Error log: 10 most recent events
- Control mode: AUTO / manual
IPRO – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certifications.
Frequently Asked Questions (FAQ) – IPRO IPC Pump Controller
What is the IPC 130M pump controller used for?
The IPC 130M controller automatically controls the operation of a single pump in water supply or tank drainage mode and protects it against dry running and electrical faults. It supports centrifugal, surface, sewage, booster, multistage, submersible, and inline pumps.
How does the IPC controller protect the pump against dry running?
The controller monitors the pump’s current consumption. When the operating current falls below the set value – which occurs when there is no water – the pump is automatically stopped.
Which sensors does the IPC controller support?
The controller works with a float switch, level probe, pressure sensor, and electrical pressure switch. The liquid level in the tank is displayed in three states: high, medium, and low.
What electrical protections does the IPC controller provide?
The controller protects the pump against locking, overload, overvoltage, undervoltage, phase loss, and short circuits. It also provides anti-corrosion protection, preventing the pump from seizing during extended periods of inactivity.
Where can I buy the IPC pump controller?
Dambat does not sell directly. IPRO IPC controllers are available from commercial partners, installation wholesalers, and authorised online distributors.
What is the warranty on the IPC controller?
IPRO – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
- Type: ,
- Number of pumps supported: 1,
- Maximum power: 3.0 kW,
- Power supply: 1~230 V,
- Frequency: 50 Hz,
- Maximum supported current: A
- Protection rating:
- Maximum liquid temperature: °C
- Dimensions: 210/139/65 mm,
- Weight: 0.8 kg.
ADDITIONAL INFORMATION
• Trigger signal:
o Float switch,
o Pressure sensor,
o Pressure switch,
o Electrode,
• Fault status:
o Fault code display,
o Visual and audible fault signal,
• Button for automatic calibration of overcurrent/undercurrent parameters (adjustable no-load start delay),
• Automatic restart after returning to normal conditions following a voltage drop or rise,
• Water supply to a pressurized tank, drainage from a non-pressurized tank, constant monitoring of pipeline pressure,
• Digital voltmeter, ammeter, and three-state liquid level display in the tank,
• Pump blockage protection, dry-run protection, overcurrent protection, undercurrent protection, phase-loss protection, overvoltage or undervoltage protection, short-circuit protection,
• AUTO/Manual operating mode switch button,
• Automatic restoration of the set operating mode after a fault,
• No-load restart: adjustable range of 0–999 minutes.
• Anti-corrosion control interval: every 15 days,
• Dry-run response time: 0.1 s–3 min,
• Overload response time: 0.1 s–3 min,
• Automatic fault response: 1 s.
• Supported voltage range: 176–264 V (adjustable),
• Display: LCD,
• Start: Direct-on-line,
• Liquid level indications: High, medium, low,
• Maximum signal transmission distance: ≤2000 m (without strong electromagnetic interference),
• Installation: wall-mounted (indoors).
IPC 130M Pump Controller – Intelligent Protection for the IPRO Pump
The IPRO IPC 130M pump controller is an intelligent, automatic system for managing the operation of a single pump with an LCD display. It controls the pump in water supply or tank drainage mode and protects it against dry running and electrical faults.
Who It Is For
- Well drillers and pump installers – the IPC controller stops the pump during dry running based on current monitoring, reducing the risk of damage.
- Users of submersible pumps and pressure-boosting systems – a full range of electrical protections safeguards the pump against overloads and power supply problems.
- Farms and facilities with their own water intake – automatic restart after a fault has cleared ensures continuous water supply.
- Service companies – the LCD display with voltage and current measurements and a log of the latest errors simplifies system diagnostics.
Applications
The IPC 130M controller is designed for centrifugal, surface, sewage, booster, multistage, submersible, and inline pumps. It enables water supply and tank drainage, with level-, pressure-, or time-based control.
The device is wall-mounted. The protection system provides direct pump starting. An external level or pressure sensor triggers operation, while the type of fault is indicated by a code on the display as well as by visual and audible signals.
IPC Controller Features – Description and Technical Data
The system provides automatic, maintenance-free pump operation management with readings shown on an LCD display. Dry-run protection operates based on current monitoring – when current consumption falls below the set value, for example when there is no water, the pump is stopped. The error log stores the ten most recent events, simplifying diagnostics.
- Type: intelligent automatic pump controller and protection device
- Control: one pump
- Control functions: water supply, tank drainage, level / pressure / time-based control
- Protections: dry running (current monitoring), pump lock, overload, overvoltage, undervoltage, phase loss, short circuit
- Anti-corrosion protection: prevents the pump from seizing during extended periods of inactivity
- Supported sensors: float switch, level probe, pressure sensor, pressure switch
- Liquid level indication: three-state (high / medium / low)
- Measurements: digital voltmeter and ammeter
- Error log: 10 most recent events
- Control mode: AUTO / manual
IPRO – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certifications.
Frequently Asked Questions (FAQ) – IPRO IPC Pump Controller
What is the IPC 130M pump controller used for?
The IPC 130M controller automatically controls the operation of a single pump in water supply or tank drainage mode and protects it against dry running and electrical faults. It supports centrifugal, surface, sewage, booster, multistage, submersible, and inline pumps.
How does the IPC controller protect the pump against dry running?
The controller monitors the pump’s current consumption. When the operating current falls below the set value – which occurs when there is no water – the pump is automatically stopped.
Which sensors does the IPC controller support?
The controller works with a float switch, level probe, pressure sensor, and electrical pressure switch. The liquid level in the tank is displayed in three states: high, medium, and low.
What electrical protections does the IPC controller provide?
The controller protects the pump against locking, overload, overvoltage, undervoltage, phase loss, and short circuits. It also provides anti-corrosion protection, preventing the pump from seizing during extended periods of inactivity.
Where can I buy the IPC pump controller?
Dambat does not sell directly. IPRO IPC controllers are available from commercial partners, installation wholesalers, and authorised online distributors.
What is the warranty on the IPC controller?
IPRO – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.