IP 900 INOX – submersible pump
The IBO IP 900 INOX submersible pump is a series of units with a stainless steel housing,
designed for pumping clean and slightly contaminated water free of abrasive particles.
abrasive particles. The power range from 550 W (IP 550 INOX) to 1100 W (IP 1100 INOX) makes it possible to select
the model to the capacity required for a given installation. The stainless steel housing design
reduces susceptibility to mechanical damage and corrosion in more demanding operating conditions.
Who it is for
-
Water and sewage installation companies – the stainless steel housing is suitable for frequent transfer of the pump between successive service calls.
-
Industrial plants and maintenance departments – the housing's increased mechanical resistance facilitates operation in harsher conditions than a technopolymer housing.
-
Farms and livestock operations – the pumps are suitable for pumping water from ponds, reservoirs, and shallow ring wells for irrigation or watering animals.
-
Wholesale and technical stores – the power range from 550 W to 1100 W makes it possible to offer a model suited to installations of different scales.
Applications
The IP INOX series of submersible pumps is intended for pumping clean and slightly
contaminated water without abrasive particles such as sand. The pumps are designed
for draining flooded rooms, basements, garages, swimming pools, and sumps, as well as
for pumping water from ponds, rivers, and surface reservoirs.
The units operate in a vertical position, fully submerged, at a maximum temperature
of the pumped liquid up to 35°C. The permissible size of soft solid contaminants is
30 mm, allowing operation in slightly contaminated water without the risk of blockage
The IP INOX 230 V submersible pump performs well both in domestic installations,
as well as in applications requiring greater housing resistance to damage.
Features of the IP INOX series
The IP INOX series pumps feature an AISI 304 stainless steel housing, while the shaft and rotor
The motor shaft is made of the same material. The impeller is made of PPO polymer, and the mechanical seal
in the SiC/graphite system provide resistance to typical contaminants found
in raw and slightly contaminated water.
The integrated float switch automatically switches the pump on and off depending
depending on the water level, while also providing basic protection against dry running.
The thermal protection built into the winding protects the motor against overheating,
and the threaded, stepped discharge outlet allows hoses of different diameters to be connected.
- Pump type: submersible pump for clean and slightly contaminated water, stainless steel housing
- Power supply: 230 V (single-phase)
- Insulation class: B
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical
- Rotational speed: 2850 rpm
- Max. liquid temperature: 35°C
- Permissible size of solid contaminants: 30 mm
- Power cable length: 10 m
- Switch: float switch
- Motor protection: thermal, built into the winding
- Discharge outlet: threaded, stepped, suitable for hoses of various diameters
- Materials: housing – AISI 304 stainless steel, shaft and rotor – AISI 304 stainless steel, impeller – PPO polymer, mechanical seal – SiC/graphite
IBO – 24 months (2 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – IP INOX submersible pump
What type of water is the IP INOX submersible pump designed for?
IP INOX series pumps are designed for clean and slightly contaminated water,
free of abrasive elements such as sand. The permissible size of
soft solid contaminants is 30 mm.
How does the pump protect itself against dry running?
Protection is provided by a built-in float switch that disconnects the motor’s power supply,
when the water level falls below the safe minimum. Additionally, thermal protection
in the winding protects the motor from overheating.
What is the difference between the IP INOX pump and the standard IP version?
Both lines have identical hydraulic and electrical parameters within the corresponding
have the same power, but they differ in housing material – the IP INOX version uses
stainless steel AISI 304, while the standard IP series has a technopolymer housing. The choice depends
whether the priority is additional mechanical resistance of the housing (IP INOX),
or low device weight (IP).
How do you choose the right IP INOX pump model for your needs?
The model choice depends on the required head and flow rate – the series includes
options from 550 W (IP 550 INOX) to 1100 W (IP 1100 INOX), selected according to the scale of the flooding
or the size of the tank being emptied. If in doubt, we encourage you to
contact with the technical department.
Where can you buy an IP INOX submersible pump?
Dambat does not sell directly. IP INOX series pumps are available from partners
retail stores, installation wholesalers, and authorized online distributors.
What warranty terms apply to the IP INOX pump?
IBO – 24 months (2 years) manufacturer’s warranty. Warranty and post-warranty service
provided by Dambat.
